ComNet
Danbury, CT 06810
New Media Converter Prevents Network Video Flooding
Provides functionality for easy field deployment including DIP switch-based operation of RSFP (redundant SFP) for creating redundant fiber connections. Offers two SFP fiber ports that allow for redundant upload paths and MUX feature for port isolation. Comes with four 10/100/1000Base-T(X) copper ports and two 100/1000Base-FX SFP ports.
Read More »
Latest 75 and 95 Watt Midspan Power Injectors are IEEE 802.3 Compliant
Combines operating power and 10/100/1000TX Ethernet data on one cable and able to inject 50-57 VDC to any network cable. Features auto detection of powered devices (PDs) and supports up to 328 ft. (100 meters) transmission distances. Supplies operating power for PDs drawing a maximum of 75 and/or 95 watts and ideal for fiber optic, wireless, or other networks.
Read More »
New 12-port Gigabit Switch Designed for High-bandwidth Usage
Features eight 10/100/1000BASE-T(X) RJ-45 ports, two 100/1000/2.5GBASE-X SFP ports and two 1000/2.5G/10GBASE-X SFP ports. Offers multiple redundancy protocols to keep network free from points of interruption. PoE ports are capable of delivering 30 watts of power to all eight copper ports.
Read More »
ComNet's Gen 3 NW1 Offers Performance and Increased Stability in Applications where Interference is a Challenge
Increases throughput up to 240 Mbps, adds a 10/100/1000Mbps port and pass-through PoE. Channel spectrum widths available on the NW1 series of radios gives option of narrowing channel bandwidths. Designed for extreme conditions, extended operating temperature range as well as for resistance to water and dust intrusion.
Read More »
ComNet Introduces A Serial Data to Ethernet Terminal Server
ComNet’s Gen2 CNFE3DOE2/M is a serial data to Ethernet terminal server and media converter. It takes RS232, RS422 and RS485 serial data, converts it to IP, sends it over an Ethernet network and converts the data back at its destination. It controls remote hardware, allows simultaneous local and remote access, handles any combination of two serial data circuits inserted onto any Ethernet network...
Read More »
Self-Managed Switches come with Port Guardian feature.
Self-Managed Switches are capable of disconnecting port or IP addressable device if unauthorized access is detected. Unit’s Port Guardian feature sends SNMP notification when it senses any disconnect to head end and locks the port to prevent access.
Read More »
CNAccess Control Systems use embedded intelligence.
Available in CNA100 and CNA200 models, CNAccess Control Systems support proximity, smart card, magnetic stripe and Bluetooth® card formats. CNA100 model is used for 2 to 8 doors whereas CNA200 for up to 32 doors. Product can be managed from any location with internet connectivity.
Read More »
Three-Port Media Converter supports dual input over SFP.
Used to add IP Video toÂ- network, CNMC2+1SFP/M features 2 TX input ports and one SFP port for user's choice of fiber type, distance, connector type, and speed. Port isolation lets unit act as 2 independent media converters while using single optical fiber for transmission, while Mux feature prevents network video flooding of multicast traffic with DIP switch...
Read More »
Hardened Wireless Ethernet Radio meets industrial market demands.
Suited for use in challenging applications, NetWave® NW-9 comes enclosed in aluminum case that withstands extreme environments in industrial and transportation applications where potential for shock and impact exists. This impact-resistant, hardened, wireless Ethernet link, supporting 500 Mbps throughput,Â- can be used over distances of up to 4 miles under ideal conditions and...
Read More »
Self-Managed Ethernet Switch offers ring topology solution.
Featuring 2 copper TX ports and 2 Gigabit SFP Ethernet ports, Model CNGE2+2SMS allows IP video to be introduced in multiple locations on ring network topology without complexity managed switch requires. Port-configured Ethernet switch allows user to create virtual Local Area Network that manages Ethernet data being transported, thereby preventing network flooding. CNGE2+2SMS is pre-programmed and...
Read More »ComNet Adds Razberi Line to Product Offering
Razberi solution suite combined with innovative ComNet communication products will enable companies to deploy a simple, secure, video surveillance system. Danbury, CT. November 19, 2020, ComNet, Communication Networks of Danbury, Connecticut, a USA-based manufacturer of fiber optic transmission and networking equipment and an ACRE brand, announced that ACRE has acquired Razberi Technologies and...
Read More »
New Media Converter Prevents Network Video Flooding
Provides functionality for easy field deployment including DIP switch-based operation of RSFP (redundant SFP) for creating redundant fiber connections. Offers two SFP fiber ports that allow for redundant upload paths and MUX feature for port isolation. Comes with four 10/100/1000Base-T(X) copper ports and two 100/1000Base-FX SFP ports.
Read More »
Latest 75 and 95 Watt Midspan Power Injectors are IEEE 802.3 Compliant
Combines operating power and 10/100/1000TX Ethernet data on one cable and able to inject 50-57 VDC to any network cable. Features auto detection of powered devices (PDs) and supports up to 328 ft. (100 meters) transmission distances. Supplies operating power for PDs drawing a maximum of 75 and/or 95 watts and ideal for fiber optic, wireless, or other networks.
Read More »
New 12-port Gigabit Switch Designed for High-bandwidth Usage
Features eight 10/100/1000BASE-T(X) RJ-45 ports, two 100/1000/2.5GBASE-X SFP ports and two 1000/2.5G/10GBASE-X SFP ports. Offers multiple redundancy protocols to keep network free from points of interruption. PoE ports are capable of delivering 30 watts of power to all eight copper ports.
Read More »
ComNet's Gen 3 NW1 Offers Performance and Increased Stability in Applications where Interference is a Challenge
Increases throughput up to 240 Mbps, adds a 10/100/1000Mbps port and pass-through PoE. Channel spectrum widths available on the NW1 series of radios gives option of narrowing channel bandwidths. Designed for extreme conditions, extended operating temperature range as well as for resistance to water and dust intrusion.
Read More »
ComNet Introduces A Serial Data to Ethernet Terminal Server
ComNet’s Gen2 CNFE3DOE2/M is a serial data to Ethernet terminal server and media converter. It takes RS232, RS422 and RS485 serial data, converts it to IP, sends it over an Ethernet network and converts the data back at its destination. It controls remote hardware, allows simultaneous local and remote access, handles any combination of two serial data circuits inserted onto any Ethernet network...
Read More »
Self-Managed Switches come with Port Guardian feature.
Self-Managed Switches are capable of disconnecting port or IP addressable device if unauthorized access is detected. Unit’s Port Guardian feature sends SNMP notification when it senses any disconnect to head end and locks the port to prevent access.
Read More »
CNAccess Control Systems use embedded intelligence.
Available in CNA100 and CNA200 models, CNAccess Control Systems support proximity, smart card, magnetic stripe and Bluetooth® card formats. CNA100 model is used for 2 to 8 doors whereas CNA200 for up to 32 doors. Product can be managed from any location with internet connectivity.
Read More »
Three-Port Media Converter supports dual input over SFP.
Used to add IP Video toÂ- network, CNMC2+1SFP/M features 2 TX input ports and one SFP port for user's choice of fiber type, distance, connector type, and speed. Port isolation lets unit act as 2 independent media converters while using single optical fiber for transmission, while Mux feature prevents network video flooding of multicast traffic with DIP switch...
Read More »
Hardened Wireless Ethernet Radio meets industrial market demands.
Suited for use in challenging applications, NetWave® NW-9 comes enclosed in aluminum case that withstands extreme environments in industrial and transportation applications where potential for shock and impact exists. This impact-resistant, hardened, wireless Ethernet link, supporting 500 Mbps throughput,Â- can be used over distances of up to 4 miles under ideal conditions and...
Read More »
