Company News

Yamaichi Electronics USA, Inc.

475 Holger Way, San Jose, CA, 95134, USA

  • 408-715-9100

Latest New Product News from
Yamaichi Electronics USA, Inc.

Mounting & Attaching Products

CFP8 Connector features pitch of 0.6 mm.

Jul 15, 2017

Capable of achieving transmission rate of 400 Gbps, CFP8 Connector’s configurations support 25 Gbps x 16 channels, 50 Gbps x 8 channels, or 100 Gbps x 4 channels. Unit’s kit consists of cage, connector cover, heat sink and clip. Product comes with pin count of 124 pins. Connector comes with clipless mechanism.

Read More

Electrical Equipment & Systems, Electronic Components & Devices, Mounting & Attaching Products

HSD Connector System meets needs of automotive industry.

Jul 15, 2015

Available in B, E, and F coded versions for automotive industry, HF109P meets requirements for HSD (High Speed Data) interfaces and is used for such signals as USB or IEEE1394. Connector system, as standard HSD without ring shield, is 100Â Ω impedance controlled and transmits signals using LVDS, which prevents crosstalk between signals and interference from external influences. Metal... Read More

Electrical Equipment & Systems, Electronic Components & Devices

USB 3.1 Connectors provide up to 10,000 plug cycles.

May 26, 2015

Supporting 10 Gbps transmission rate, USB 3.1 Series includes USB type C plug, in which upper and lower sides are identical, so there is no need to pay attention to orientation of plug in connection. Type C also supports charging of batteries with power levels up to 100 W. All USB 3.1 connectors and cable assemblies are plated with nickel-palladium and gold to ensure high transmission quality.... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Circular Connector features push-pull interlocking.

May 22, 2015

Intended for back wall mounting in combination with circuit board contacts, Y-Circ® P series WD socket has anti-rotation protection and solid back stop. Product can optionally be equipped with sealing ring to permit anti-rotation protection for round holes without flat section. Available in 3 different sizes (09, 12, and 15), socket can be combined with existing pin assignments and... Read More

Electrical Equipment & Systems

M12 Circulator Connectors is available with screw locking.

Jan 05, 2015

With IP68 protection and meeting quality standards for secure contacting, Y-Circ® M series includes A, B, and D connectors in straight and angled form compliant with IEC 61076-2-101. Capability for individual configuration of 360° shielding and vibration protection allows optimum performance ratio regardless of end-user requirements. This modular system is suited for applications in... Read More

Electronic Components & Devices

QFP Test and Burn-In Socket offers movable ground pin option.

May 10, 2013

Matching QFP type IC packages with exposed pads, double shoulder contact IC500 Open Top series with movable ground pin option and no lead foot touching can be equipped with crown shaped or flat head ground pins to accommodate application requirements. Ground pin design allows center pin to actuate in conjunction with movement of push cover; 2-step actuation ensures socket remains auto-load... Read More

Electrical Equipment & Systems

Field Assembly Connectors target photovoltaic industry.

Apr 02, 2013

Available for 4–6 mm² cable cross sections, Y-Sol4 F.A.T. Connectors have spring clamping mechanism for clamping of stripped cable in field, permitting assembly without crimping. Connectors come in versions for thin wire outer diameters of 4.5–6.1 mm as well as larger cable diameters from 6.1–7.6 mm. Versions are also available for cable cross-sections from 1.5–3.5 mm². Featuring... Read More

Electronic Components & Devices

High-Speed Connector meets full MSA requirements.

Dec 31, 2012

Intended for telecomm/data communications, CFP2 connector (series CA009) has 0.6 mm pitch and 100 Gbps data transmission rate. Signals are transmitted through 80-pin host connector, which is EMI-protected and available as SMD version. At 85 mm wide, complete CFP2 set consists of host connector, plug connector, connector cover, cage, and heat sink. Up to 4 channels of 25 Gbps each are... Read More

Automatic ID, Computer Hardware & Peripherals

Reversed-Mount SIM Card Reader has 1.34 mm profile.

Jul 25, 2012

Occupying 17.5 x 12 mm footprint, FMS006-8010-0 features pull-ejector mechanism for reliable card removal and is mounted with SMT soldering on bottom of PCB. Reader has 6 gold-plated contacts and has 2-point contact design for reliability despite vibration/shock. While insulating body is made of LCP, metal cover is made of SUS. Other features include 4 ground tabs that provide EMC protection and... Read More

Automatic ID, Computer Hardware & Peripherals

Vibration-Resistant SD Card Reader employs push-lock system.

Jun 06, 2012

Suited for application in automotive or industrial markets requiring mechanical stability as well as resistance to shock and vibration, FPS009-4200-0(03) employs one-action lock mechanism. Spring automatically locks card into insert with ratchet hook on side, and operator pushes ratchet hook back to release card. Spring pressure pushes card out visibly for removal, and 2-point design secure... Read More

Electronic Components & Devices

High-Speed Connector for FFC/FPC offers direct mating function.

Nov 15, 2011

With design that simplifies connection between plug and cable, shielded HF507S-xx-72 enables high-speed FFC to be plugged directly together without additional materials. FFC has small punched-out gap on both sides in plug area for this purpose and is inserted into connector, engaging with its shape using one-push lock procedure. To remove FFC, operator presses button located on top of connector.... Read More

Computer Hardware & Peripherals

Card Reader handles 15 x 12 mm 3FF micro-SIM cards.

Oct 14, 2011

Measuring 16 x 14 x 1.34 mm, Model FUS006-8500-0 has 6 gold-plated contacts with 2-point shape that is designed to maintain contact even when subjected to shock and vibration. Special design feature automatically stops card when it is inserted in wrong direction. Mounted with SMT soldering on top of PCB, reader has LCP insulating body and SUS metal cover. Four ground connections provide EMI... Read More

Automatic ID, Computer Hardware & Peripherals

SD Card Reader features push/push design.

Sep 26, 2011

Developed for automotive applications, top-mount FPS009-2920-0 and reverse-mount FPS009-2970-0 have closed metal cover, 4 grounding tabs promote good EMC behavior, and 2 card brakes. Card detection switch, which registers presence of card, is directly at start of introduction area for SD card into reader. Additional features include smooth push-in/-out card insertion and ejection mechanism with... Read More

Electronic Components & Devices

Board Edge Connector suits automotive applications.

Jul 29, 2011

Featuring 230 contacts, 0.5 mm pitch, and 7.8 mm installation height, 90° Model BEC-0.5-230-S9-xF-R-EDC is compatible with modules that comply with MXM/QSeven Mobile PCI Express Module standard. SMT tabs simultaneously serve to connect shielding, while contact design compensates tolerances of module fixation angle regardless of PCB thickness. Graphics standards such as PCIExpress, HDMI, and... Read More

Electronic Components & Devices, Green & Clean

Hermetic Sealed Connectors target photovoltaic installations.

May 26, 2011

Supplied with PV cables, Y-Sol4 T-junction Connectors feature hermetic sealed technology, which provides leak-tight insert molding around cables, yielding IP68-compliant protection. Units permit individual series-connected module strings to be combined on parallel-connected bus bar. To prevent unintentional loosening, connectors ratchet in when closed and can only be disconnected using special... Read More

Electrical Equipment & Systems

IP68-Rated Junction Box is designed for crystalline PV modules.

May 11, 2011

Eco-Si J-Box has load capacity of 12 A and is designed for system voltages of 1,500 V, accommodating future standards requirements and applications. Achieved via consistent use of Hermetic Sealed technology, IP68 protection permits safe operation of solar module even under harsh conditions. This photovoltaic (PV) junction box, measuring 22 mm high, comes with 3 SMD safety diodes that discharge... Read More

Electrical Equipment & Systems, Green & Clean

PV Junction Box supports thin film modules.

May 11, 2011

Available with or without diodes, Model TF combines kink protection with hermetically sealed design. Cables and electronics of box are insert-molded in single work step, which gives box its shape and ensures freedom from leaks. TÃœV and UL listed unit is mounted on solar panel with adhesive pads, and bands of photovoltaic module are contacted through clamping terminals. With 14 mm height,... Read More

Electrical Equipment & Systems

Circular Connector tolerates harsh environmental conditions.

Apr 25, 2011

Model D38999 plug connector is suited for use in harsh environments in aerospace, military, motor sports, maritime, and rail industries. Insertion molding of housing parts results in permanent connection, at molecular level, between individual components of plug connector, injection molded material, and cable sheathing. Protected from moisture, product is available in any shape or color, or... Read More

Electronic Components & Devices, Test & Measuring Instruments

FPC Testing Socket features horse-shoe shaped contact.

Mar 31, 2011

Supporting ultra fine pitches down to 0.3 mm, LC Series Clip Type Socket features specially designed contacts that carry out micro wiping action, ensuring stable, low contact resistance. Elevator stage prevents FPC pads from being damaged or scratched while simultaneously protecting contacts during FPC load/unload operation. As output options, customer can choose discrete wiring, MIL Std., or FPC... Read More

Electronic Components & Devices, Mechanical Components and Assemblies

RJ45 Connector Covers provide EMI protection.

Mar 02, 2011

Featuring IP67, IP68, and IP69K ratings, Y-ConCover-10-E and Y-ConCover-40-E are equipped with special contact springs for plug area that provide reliable connection between plug and jack. Washer integrated into housing also protects entire interior area of plug connector. Springs offer EMI protection and ensure that applications remain protected without interruption, even with vibrations and... Read More

Other Company News from
Yamaichi Electronics USA, Inc.