Micro-Epsilon
Raleigh, NC 27617
Laser Sensor measures thickness of coils in slitting lines.
Used to determine thickness profile of individual metal strips in slitting lines, thicknessCONTROL MTS 8201.LLT O-frame measurement system usesÃ- two laser triangulation profile sensors to perform alloy-independent measurements with accuracy to few micrometres. Laser line sensor addresses specific measurement tasks, including channelled sheets and thickness of sandwich plates made from...
Read More »Laser Displacement Sensors suit dynamic R&D applications.
Along with 10kHz cut-off frequency and 0.5–200 mm measuring range, optoNCDT 1610 series feature analog engine that provides precision measurement results for almost every surface type. Automatic light control feature allows for visual adaptation to changing target surfaces, while Ethernet interface and analog outputs facilitate integration with laser sensors within process. Product works with...
Read More »Compact Industrial PC supports thermography applications.
Available for thermoIMAGER TIM Series of IR cameras, TIM NetBox replaces standard PC/laptop in industrial thermography applications, enabling cameras to be used as standalone solutions for measuring and monitoring tasks. System is based on COM-Express mini embedded board with IntelÃ-® Atom™ Z530 processor, 2 GB SSD, and 512 MB RAM. TIM NetBox is available with 3x USB 2.0, 1x mini USB,...
Read More »RS422/USB converter lets computers accommodate optical sensors.
Four-channel IF2004/USB lets lab PCs, company laptops, or computers without RS422 industrial interface evaluate readings from laser and confocal sensors. Able to convert digital signals from up to 4 optical sensors into USB data packet, product also ensures synchronous data acquisition for defined temporal allocation of four RS422 inputs. Converter has 4 trigger inputs and one trigger output for...
Read More »Capacitive Demodulator suits high-resolution measurement tasks.
Based on modular design principle, DL 6230 Demodulator for capacitive displacement and distance measurement sensors can be operated with up to 4 channels using DT6200 controller. These additional channels can be added/removed by user without impacting software performance and operation. With demodulator, capaNCDT 6200 is used to measure thickness, tilt angle, and vibrations at sub-micrometer to...
Read More »Laser Triangulation Sensor has 100,000 Hz cut-off frequency.
Able to be used for high-speed displacement, distance, and position measurements up to 100 kHz, optoNCDT 1630 offers compact design, Ethernet interface, and analog outputs to simplify integration with process control systems. Automatic lighting control feature allows for visual adaptation to different target surfaces, and functionality is suited for vibration measurements, crash tests, and...
Read More »Laser Profile Scanners provide gap measurements.
With compact design and advanced triggering capabilities, gapCONTROL 2611 and 2911 can be integrated into industrial environments, such as welding, joining, and assembly processes. Sensors measure gaps as well as flushness, overlapping, proximity, and height offsets. Included gapCONTROL Setup Software configures sensors, defines metrics, and outputs measurement values. Results can be used, for...
Read More »IR Temperature Sensors target OEMs.
Suited for demanding mechanical applications, CX thermoMETER Series provides signal using single twin-wire cable, which also powers unit, whereby signal-dependent current flows at same time. Units feature -30 to +900Ã-
Read More »Laser Micrometers offer independent linearity of 0.2%.
Fully digital with CCD array as receiver, optoCONTROL 1202-75 and 1202-100 utilize visible Class 2 laser and offer measuring range of 75 mm and 100 mm, respectively. Laser light and interference filter make devices insensitive to external light influences. Since transmitter is separate from receiver, instruments offer flexible mounting. Micrometers can provide non-contact and dynamic measurements...
Read More »reflectCONTROL Automotive Scores Worldwide Success
The reflectCONTROL Automotive automatic paint defect inspection system has experienced a global breakthrough with leading automotive groups. The inspection of shiny surfaces using this system is easy, fast and safe. From a complete chassis to a single painted part, small defects can be reliably recognised inline, enabling 100% control. Leading carmakers are relying on proven paint defect...
Read More »New Catalogue for Compact Thermal Imaging Cameras
The new catalogue for compact thermal imaging cameras is now available and includes all current thermoIMAGER TIM models. The range has even increased with many new products. The new catalogue based on the theme of compact thermal imaging cameras is now available online and as printed matter. Detailed specifications of each camera and numerous graphics provide a comprehensive overview of all TIM...
Read More »Laser Sensor measures thickness of coils in slitting lines.
Used to determine thickness profile of individual metal strips in slitting lines, thicknessCONTROL MTS 8201.LLT O-frame measurement system usesÃ- two laser triangulation profile sensors to perform alloy-independent measurements with accuracy to few micrometres. Laser line sensor addresses specific measurement tasks, including channelled sheets and thickness of sandwich plates made from...
Read More »Laser Displacement Sensors suit dynamic R&D applications.
Along with 10kHz cut-off frequency and 0.5–200 mm measuring range, optoNCDT 1610 series feature analog engine that provides precision measurement results for almost every surface type. Automatic light control feature allows for visual adaptation to changing target surfaces, while Ethernet interface and analog outputs facilitate integration with laser sensors within process. Product works with...
Read More »Compact Industrial PC supports thermography applications.
Available for thermoIMAGER TIM Series of IR cameras, TIM NetBox replaces standard PC/laptop in industrial thermography applications, enabling cameras to be used as standalone solutions for measuring and monitoring tasks. System is based on COM-Express mini embedded board with IntelÃ-® Atom™ Z530 processor, 2 GB SSD, and 512 MB RAM. TIM NetBox is available with 3x USB 2.0, 1x mini USB,...
Read More »RS422/USB converter lets computers accommodate optical sensors.
Four-channel IF2004/USB lets lab PCs, company laptops, or computers without RS422 industrial interface evaluate readings from laser and confocal sensors. Able to convert digital signals from up to 4 optical sensors into USB data packet, product also ensures synchronous data acquisition for defined temporal allocation of four RS422 inputs. Converter has 4 trigger inputs and one trigger output for...
Read More »Capacitive Demodulator suits high-resolution measurement tasks.
Based on modular design principle, DL 6230 Demodulator for capacitive displacement and distance measurement sensors can be operated with up to 4 channels using DT6200 controller. These additional channels can be added/removed by user without impacting software performance and operation. With demodulator, capaNCDT 6200 is used to measure thickness, tilt angle, and vibrations at sub-micrometer to...
Read More »Laser Triangulation Sensor has 100,000 Hz cut-off frequency.
Able to be used for high-speed displacement, distance, and position measurements up to 100 kHz, optoNCDT 1630 offers compact design, Ethernet interface, and analog outputs to simplify integration with process control systems. Automatic lighting control feature allows for visual adaptation to different target surfaces, and functionality is suited for vibration measurements, crash tests, and...
Read More »Laser Profile Scanners provide gap measurements.
With compact design and advanced triggering capabilities, gapCONTROL 2611 and 2911 can be integrated into industrial environments, such as welding, joining, and assembly processes. Sensors measure gaps as well as flushness, overlapping, proximity, and height offsets. Included gapCONTROL Setup Software configures sensors, defines metrics, and outputs measurement values. Results can be used, for...
Read More »New CEO for Micro-Epsilon Eltrotec
On 1st January 2013, Bernd Hendrych was appointed as new CEO for Micro-Epsilon Eltrotec. In this role, he will continue the work of his predecessor Claus Hofmann, who left the company on the 31 December 2012. Bernd Hendrych had been Head of Sales at Eltrotec since 2005. Prior to his time at Micro-Epsilon Eltrotec, Bernd worked for more than 25 years in various development, export and sales roles...
Read More »