Servo2Go.com

New Model QDH20 Optical Encoder Offers a Frequency Response of 500 kHz
Communication Systems & Equipment

New Model QDH20 Optical Encoder Offers a Frequency Response of 500 kHz

The Model QDH20 Optical Encoder features 0.375 in. diameter shaft and can be operated in temperatures up to 100°C. The encoder offers output that consists of quadrature A and B with standard reference pulse Z. The product provides configurable output with either standard 5 to 26 volt OL7272 line driver or open collector outputs. The device comes with two heavy-duty bearing sets and delivers a...

Read More »
Advanced Motion Controls Presents AB25A100 PWM Servo Drive with Offset Adjusting Potentiometer
Controls & Controllers

Advanced Motion Controls Presents AB25A100 PWM Servo Drive with Offset Adjusting Potentiometer

The AB25A100 PWM Servo Drive is designed for driving brushless and brushed DC motors at high switching frequency. The drive comes with built-in hardware protection such as overvoltage, under-voltage, over-current, over-heating and short-circuits. The unit is offered with DIP switches and potentiometers for loop turning, current limit adjustments and drive configuration. It accepts 20-80 VDC input...

Read More »
New MPC Power-Off Brake Module Features 12 in. Lead Wire Termination
Mechanical Power Transmission

New MPC Power-Off Brake Module Features 12 in. Lead Wire Termination

Servo2Go’s MPC Power-Off Brake Module is available with 12 VDC, 24 VDC, 90 VDC or 120 VAC windings. The unit mounts directly on NEMA 17 or NEMA 23 frame servo or step motor and the output can be coupled to NEMA C-face gear reducer. The modules are designed to decelerate or hold an inertial load when voltage is turned off and when voltage is applied the friction disc is released and brake is...

Read More »
AB25A100 Panel Mount Servo Drive features hardware protection.
Controls & Controllers

AB25A100 Panel Mount Servo Drive features hardware protection.

AB25A100 Panel Mount Servo Drive has built-in protection from overheating and short circuits. Unit uses switches and potentiometers for loop tuning, limits, and configuration. Suitable for high switching frequency for brushless and brushed DC motors, product contains current, velocity, and fault monitor output signals. AB25A100 Panel Mount Servo Drive works with other controllers or alone with a...

Read More »
SCN6 Series Actuators offer backlash of 0.3 mm.
Mechanical Power Transmission

SCN6 Series Actuators offer backlash of 0.3 mm.

SCN6 Series Actuators are available in 50-300 mm stroke lengths and 500N maximum thrust. Units are constructed using extruded aluminum body and 303 stainless shaft and rod tip. Operated using 24VDC signals from PLCs or relays, actuators can be connected in networks of up to 16 axes. Units offer maximum speed of up to 200mm/sec with ±0.1 mm repeatability and meet IP40 and IP54 ratings.

Read More »
Exor UniOP eTOP310 HMI is offered with on-board PLC.
Controls & Controllers

Exor UniOP eTOP310 HMI is offered with on-board PLC.

Exor UniOP eTOP310 HMI comes with front panel colors such as white, black and metallic silver and is suitable for factory and building automation applications. Unit is compatible with UniOP Designer 6 software and comes in aluminum housing. Featuring Ethernet and USB connections, product is equipped with TFT display with LED backlight and offered with on-board I/O option. eTOP310 HMI offers GPRS...

Read More »
Low-cost Spring Applied Brakes for Servo and Stepper Motors
Mechanical Power Transmission

Low-cost Spring Applied Brakes for Servo and Stepper Motors

Inertia Dynamics type FSB brakes are designed to decelerate or hold inertial loads when the voltage is turned off. These brakes can be mounted to a bulkhead or motor. The FSB brakes are rated up to 100 Lb-in static torque, and fit motors up to 5.3" OD. Features of FSB Spring Applied Brakes: • 12V, 24V, 90VDC or 120VAC windings • Static torque to 100 lb-in • Bore sizes from 1/4" to 3/4" •...

Read More »
New Model QDH20 Optical Encoder Offers a Frequency Response of 500 kHz
Communication Systems & Equipment

New Model QDH20 Optical Encoder Offers a Frequency Response of 500 kHz

The Model QDH20 Optical Encoder features 0.375 in. diameter shaft and can be operated in temperatures up to 100°C. The encoder offers output that consists of quadrature A and B with standard reference pulse Z. The product provides configurable output with either standard 5 to 26 volt OL7272 line driver or open collector outputs. The device comes with two heavy-duty bearing sets and delivers a...

Read More »
Advanced Motion Controls Presents AB25A100 PWM Servo Drive with Offset Adjusting Potentiometer
Controls & Controllers

Advanced Motion Controls Presents AB25A100 PWM Servo Drive with Offset Adjusting Potentiometer

The AB25A100 PWM Servo Drive is designed for driving brushless and brushed DC motors at high switching frequency. The drive comes with built-in hardware protection such as overvoltage, under-voltage, over-current, over-heating and short-circuits. The unit is offered with DIP switches and potentiometers for loop turning, current limit adjustments and drive configuration. It accepts 20-80 VDC input...

Read More »
New MPC Power-Off Brake Module Features 12 in. Lead Wire Termination
Mechanical Power Transmission

New MPC Power-Off Brake Module Features 12 in. Lead Wire Termination

Servo2Go’s MPC Power-Off Brake Module is available with 12 VDC, 24 VDC, 90 VDC or 120 VAC windings. The unit mounts directly on NEMA 17 or NEMA 23 frame servo or step motor and the output can be coupled to NEMA C-face gear reducer. The modules are designed to decelerate or hold an inertial load when voltage is turned off and when voltage is applied the friction disc is released and brake is...

Read More »
AB25A100 Panel Mount Servo Drive features hardware protection.
Controls & Controllers

AB25A100 Panel Mount Servo Drive features hardware protection.

AB25A100 Panel Mount Servo Drive has built-in protection from overheating and short circuits. Unit uses switches and potentiometers for loop tuning, limits, and configuration. Suitable for high switching frequency for brushless and brushed DC motors, product contains current, velocity, and fault monitor output signals. AB25A100 Panel Mount Servo Drive works with other controllers or alone with a...

Read More »
SCN6 Series Actuators offer backlash of 0.3 mm.
Mechanical Power Transmission

SCN6 Series Actuators offer backlash of 0.3 mm.

SCN6 Series Actuators are available in 50-300 mm stroke lengths and 500N maximum thrust. Units are constructed using extruded aluminum body and 303 stainless shaft and rod tip. Operated using 24VDC signals from PLCs or relays, actuators can be connected in networks of up to 16 axes. Units offer maximum speed of up to 200mm/sec with ±0.1 mm repeatability and meet IP40 and IP54 ratings.

Read More »
Exor UniOP eTOP310 HMI is offered with on-board PLC.
Controls & Controllers

Exor UniOP eTOP310 HMI is offered with on-board PLC.

Exor UniOP eTOP310 HMI comes with front panel colors such as white, black and metallic silver and is suitable for factory and building automation applications. Unit is compatible with UniOP Designer 6 software and comes in aluminum housing. Featuring Ethernet and USB connections, product is equipped with TFT display with LED backlight and offered with on-board I/O option. eTOP310 HMI offers GPRS...

Read More »
Low-cost Spring Applied Brakes for Servo and Stepper Motors
Mechanical Power Transmission

Low-cost Spring Applied Brakes for Servo and Stepper Motors

Inertia Dynamics type FSB brakes are designed to decelerate or hold inertial loads when the voltage is turned off. These brakes can be mounted to a bulkhead or motor. The FSB brakes are rated up to 100 Lb-in static torque, and fit motors up to 5.3" OD. Features of FSB Spring Applied Brakes: • 12V, 24V, 90VDC or 120VAC windings • Static torque to 100 lb-in • Bore sizes from 1/4" to 3/4" •...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers