Ultraflex Power Technologies
Ronkonkoma, NY 11779
UltraFlex Demonstrates Hardening and Tempering of Alloy Steel Chains Using Induction
[Nov 2nd, 2018] UltraFlex Power Technologies recently published the results from yet another test application of induction heating for manufacturing purposes. In the test, industrial chains made up of alloy steel had to be hardened and tempered using induction heating, at temperatures of 1580˚F (860˚C) and 204˚F (400˚C) respectively. UltraFlex provides the most advanced digitally controlled...
Read More »
New Demonstration by UltraFlex Shows Bore Heating of a Steel Pipe Using Induction
[Oct 22nd, 2018] In pursuit of proving the limitless possibilities of induction heating for manufacturing purposes, UltraFlex Power Technologies has demonstrated how bore heating of a steel pipe could be achieved using induction heating. UltraFlex provides the most advanced digitally controlled induction heating solutions in the industry and is regularly coming up with proofs of how induction...
Read More »
UltraFlex Demonstrating Hardening of Push and Plane Rods Using Induction Heating, at Temperature 1508˚F - 1742˚F (820˚C - 950˚C)
[Oct 10th, 2018] UltraFlex - a leading induction heating solutions provider - has demonstrated the hardening of a push rod and plane rod using induction heating, at temperature of 1508˚F–1742˚F (820˚C – 950˚C). The hardening process is yet another application of induction heating demonstrated by UltraFlex engineers, using the company’s proprietary, advanced digitally controlled...
Read More »
UltraFlex Induction Brazing Demo for Copper, Brass and Steel Proves the Energy- and Time-Efficiency of the Induction Brazing Process
[Sept 27th, 2018] In a series of tests, UltraFlex Power Technologies - manufacturer of the most advanced digitally controlled induction heating solutions in the industry - demonstrated the induction-based brazing process for 4 different types of assemblies: copper to copper, copper to brass, copper to steel, and brass to steel assembly. The company shared the brazing time and heating parameters...
Read More »
UltraFlex Induction Heater Used to Harden a Steel Gun Barrel
[Sept 11th, 2018] New tests performed by UltraFlex Power Technologies revealed the results achieved when an induction heater was used for hardening of a 4140 steel gun barrel. The ultimate goal of the tests was to heat a small block section of a gun barrel to 1500◦F (815◦C) and quench it in oil, identifying the best possible induction coil and equipment settings for the process. An advanced...
Read More »
UltraFlex Using Induction to Solder Stainless Steel Wire Frame to a Thin Coaxial Wire in 0.5 Seconds
[Aug 3rd, 2018] UltraFlex Power Technologies has recently demonstrated yet another successful application of Induction heating for soldering purposes. In this demo, a small coaxial cable 0.012″(0.32mm) thick had to be soldered first to a 0.006″ (0.16mm) thick, 0.57″x0.55″(14.5 x 14mm) stainless-steel wire frame, then to a 0.006″(0.16mm) thick, 0.07″(2mm) wide stainless steel strip...
Read More »
UltraFlex Induction Heaters Solder Brass Tube within 25 Seconds
[July 20th, 2018] Several tests performed by UltraFlex Power Technologies showed that brass tubes can be soldered to galvanized steel pans within less than 0.5 minutes. It took only three tests to optimize the soldering results, identifying the best flux and induction heating process to be used. All three tests had been performed using brass tube 67.31” (0.66mm) high and 0.037” (0.93mm)...
Read More »
UltraFlex Heating Wires to 204
[May 2nd, 2018] UltraFlex - provider of the most innovative digitally controlled induction heating solutions in the industry - shared the results from their recent induction heating tests performed on wires with different diameter. Using the company’s proprietary induction heating equipment - an UltraHeat 10 kW power supply and a HS8LF Heat Station - UltraFlex successfully heated wires of 4...
Read More »
New SmartPower™ Compac System Comes with Direct Digital Step™ Control Algorithm
UltraFlex’s SmartPower™ Compac System features multiple induction heating programs and profiles for automatic process control. Unit offers output power from 50kW to 400kW and two frequency ranges for operation at 6kHz to 60kHz and at 40kH to 200kHz. The system comes with built-in temperature control and monitoring and cycle-by-cycle energy monitoring features. SmartPower™ is equipped with...
Read More »
Ultraflex Brazing Copper Pipes in Less than 60 Seconds Using Induction Heating
[April 6th, 2018] A recent demonstration set up by UltraFlex Power Technologies aimed at evaluating whether copper t pipes could be brazed using induction heating, replacing the traditional flame-based pipe brazing. Two pairs of copper tubes had been used in this demonstration. The first set included a main copper tube of 1.13” (28.70 mm) outside diameter and 1.01” (25.65 mm) inside diameter...
Read More »