Tormach

Laboratory and Research Supplies and Equipment

CNC Milling Machine features polyphase motion technology.

In addition to 5,100 rpm R8 spindle driven by 1.5 hp induction motor with sensorless vector control logic, PCNC 1100 Series 3 utilizes cast iron frame with hand-scraped hydrodynamic slideways featuring low-friction, PTFE-filled, acetyl-bonded sliding surfaces. Additional features include polyphase stepper motors with Leadshine® microstepping drivers; durable copolymer enamel paint system;...

Read More »
Personal CNC Milling Machine operates on 115 Vac.
Laboratory and Research Supplies and Equipment

Personal CNC Milling Machine operates on 115 Vac.

Combining cast iron construction, P4 grade ballscrews, and sensorless vector drive spindle technology, Model PCNC 770(TM) is suited for prototyping, small business, research and development, and educational use. Machine offers 130 ipm feedrates in both X and Y axes and features 1 hp, 10,000 rpm spindle that is compatible with R8 and TTS tools. Providing work envelope of 13 x 7.5 x 13.25 in., PCNC...

Read More »
Laboratory and Research Supplies and Equipment

Modular Tooling System uses interchangeable carbide inserts.

Using 5 cutting head geometries in multiple sizes and tool lengths, Modular Insert Tooling offers 24 different cutting tool combinations. Cutter mounts are available in 3 lengths, while geometries are available for face milling, end milling, center-cutting endmilling, ball end milling, and toroidal end milling. Each mount uses Tormach Tooling System (TTS) geometry for quick tool offset...

Read More »
Three-Axis CNC Mill is offered with load meter accessory.
Laboratory and Research Supplies and Equipment

Three-Axis CNC Mill is offered with load meter accessory.

Model PCNC 1100 mill is available with PN 31101 Load Meter, which will display real-time spindle load to enable operator to visually monitor cutting performance. Specifically, meter can be used to monitor tool wear as well as troubleshoot both programming and drive performance. Ability to monitor spindle load lets operators and programmers tune speed, feed, cut depth, and other factors,...

Read More »
Tapping Head facilitates tapping of small holes up to ½ in.
Architectural & Civil Engineering Products

Tapping Head facilitates tapping of small holes up to ½ in.

Compatible with any small CNC using R8 or MT3 taper, Tension/Compression Tapping Head model PN 31163 includes tapping chuck and nine quick-change collets. It is compatible with ANSI-compliant inch (#0-Â-½ in.) and metric (M1.6-12) taps and has ¾ in. of float built in to maintain coordination of spindle speed and feed rate. Tool works seamlessly with PCNC 1100 mill, and can also be...

Read More »
Laboratory and Research Supplies and Equipment

Mill Accessory can transform any CNC mill into CNC lathe.

With space saving Duality Lathe, parts can be both CNC turned and milled in single setup. When mounted on PCNC 1100 mill, accessory can be used for milling operations such as flats, cross drilling, slotting, and contouring, and, when mounted on bench top, Duality Lathe is used in manual mode, eliminating need for separate manual lathe. It includes quick change tool system, dedicated lathe control...

Read More »
Software

Tormach Releases Newly Designed Machine Controller

Mach3-platform software now fully integrated into CAM Waunakee, WI May 9, 2007 - Tormach LLC, innovators of personal CNC technology, announced today the release of its new CNC Machine Control software. Based on a platform of widely popular CNC controller Mach 3 from ArtSoft, the M3 release contains new modifications that allow direct integration with a variety of CAM applications. With its...

Read More »
Architectural & Civil Engineering Products

Tormach Tooling System Expands Line

New additions to the popular quick-change R8 tooling system Waunakee, WI January 16, 2007 - Tormach, Inc., innovators of CNC technology, announced an expansion of the popular Tormach Tooling System (TTS) line of low cost quick change tool holders. The latest additions to the line include a boring head, ¼" and 5/16" tool holders, a shell mill holder, and a conversion kit to adapt generic ¾"...

Read More »
Laboratory and Research Supplies and Equipment

Triple-Axis CNC Mill allows for user-based customization.

Weighing 1,130 lb, PCNC 1100 CNC is equipped with 1.5 hp, 4,500 rpm, variable-speed spindle suited for short-run and prototyping applications as well as secondary operations. Compact design combines cast-iron construction with CNC technology, bed mill style frame, dovetail ways, and ground ballscrews. Capable of cutting iron, steel, titanium, and chromium alloys, 3-axis milling machine has 33.5 x...

Read More »
Laboratory and Research Supplies and Equipment

CNC Milling Machine features polyphase motion technology.

In addition to 5,100 rpm R8 spindle driven by 1.5 hp induction motor with sensorless vector control logic, PCNC 1100 Series 3 utilizes cast iron frame with hand-scraped hydrodynamic slideways featuring low-friction, PTFE-filled, acetyl-bonded sliding surfaces. Additional features include polyphase stepper motors with Leadshine® microstepping drivers; durable copolymer enamel paint system;...

Read More »
Personal CNC Milling Machine operates on 115 Vac.
Laboratory and Research Supplies and Equipment

Personal CNC Milling Machine operates on 115 Vac.

Combining cast iron construction, P4 grade ballscrews, and sensorless vector drive spindle technology, Model PCNC 770(TM) is suited for prototyping, small business, research and development, and educational use. Machine offers 130 ipm feedrates in both X and Y axes and features 1 hp, 10,000 rpm spindle that is compatible with R8 and TTS tools. Providing work envelope of 13 x 7.5 x 13.25 in., PCNC...

Read More »
Laboratory and Research Supplies and Equipment

Modular Tooling System uses interchangeable carbide inserts.

Using 5 cutting head geometries in multiple sizes and tool lengths, Modular Insert Tooling offers 24 different cutting tool combinations. Cutter mounts are available in 3 lengths, while geometries are available for face milling, end milling, center-cutting endmilling, ball end milling, and toroidal end milling. Each mount uses Tormach Tooling System (TTS) geometry for quick tool offset...

Read More »
Company News

Tormach Joins Microsoft Windows Embedded Systems Partner Program

The new partnership will bring value, quality to customers Waunakee, WI, May 4, 2009 - Tormach, LLC announced today that it has joined the Microsoft Windows Embedded Partner Program. The new relationship with Microsoft will give Tormach access to Windows Embedded solutions and technologies, improving software solutions and lowering development costs for the PCNC 1100 mill and future products....

Read More »
Company News

Tormach Announces New Personal Manufacturing Workshops

CNC FUNDAMENTALS will teach attendees how to get the most out of the PCNC 1100 mill Waunakee, WI, March 25, 2009 - Tormach, LLC, manufacturer of the PCNC 1100 personal CNC mill, is now offering CNC FUNDAMENTALS as the first workshop in the new Personal Manufacturing Series. The workshop is a hands-on introduction to CNC, from art to part. Each attendee who completes the 3-day course will build...

Read More »
Three-Axis CNC Mill is offered with load meter accessory.
Laboratory and Research Supplies and Equipment

Three-Axis CNC Mill is offered with load meter accessory.

Model PCNC 1100 mill is available with PN 31101 Load Meter, which will display real-time spindle load to enable operator to visually monitor cutting performance. Specifically, meter can be used to monitor tool wear as well as troubleshoot both programming and drive performance. Ability to monitor spindle load lets operators and programmers tune speed, feed, cut depth, and other factors,...

Read More »
Tapping Head facilitates tapping of small holes up to ½ in.
Architectural & Civil Engineering Products

Tapping Head facilitates tapping of small holes up to ½ in.

Compatible with any small CNC using R8 or MT3 taper, Tension/Compression Tapping Head model PN 31163 includes tapping chuck and nine quick-change collets. It is compatible with ANSI-compliant inch (#0-Â-½ in.) and metric (M1.6-12) taps and has ¾ in. of float built in to maintain coordination of spindle speed and feed rate. Tool works seamlessly with PCNC 1100 mill, and can also be...

Read More »
Laboratory and Research Supplies and Equipment

Mill Accessory can transform any CNC mill into CNC lathe.

With space saving Duality Lathe, parts can be both CNC turned and milled in single setup. When mounted on PCNC 1100 mill, accessory can be used for milling operations such as flats, cross drilling, slotting, and contouring, and, when mounted on bench top, Duality Lathe is used in manual mode, eliminating need for separate manual lathe. It includes quick change tool system, dedicated lathe control...

Read More »
Software

Tormach Releases Newly Designed Machine Controller

Mach3-platform software now fully integrated into CAM Waunakee, WI May 9, 2007 - Tormach LLC, innovators of personal CNC technology, announced today the release of its new CNC Machine Control software. Based on a platform of widely popular CNC controller Mach 3 from ArtSoft, the M3 release contains new modifications that allow direct integration with a variety of CAM applications. With its...

Read More »
Architectural & Civil Engineering Products

Tormach Tooling System Expands Line

New additions to the popular quick-change R8 tooling system Waunakee, WI January 16, 2007 - Tormach, Inc., innovators of CNC technology, announced an expansion of the popular Tormach Tooling System (TTS) line of low cost quick change tool holders. The latest additions to the line include a boring head, ¼" and 5/16" tool holders, a shell mill holder, and a conversion kit to adapt generic ¾"...

Read More »

All Topics