Moxa
Suite 100
Brea, CA 92821
Wireless Device suits industrial networking applications.
Used with Ethernet switches and other Ethernet-ready devices, AirWorks AWK-1100 may be operated as AP, bridge, or AP client to provide ready access to WLAN. Industrial IEEE 802.11g wireless product features Wi-Fi Protected Access security capability and redundant power inputs. Able to authenticate and authorize wireless users by IEEE 802.1x and RADIUS, plug-and-play solution offers DIN-Rail...
Read More »
Modular Redundant Switch helps supervise Ethernet network.
EtherDevice(TM) Switch EDS-726 accepts up to 2 Gigabit ports and 24 fast Ethernet ports from selection of three 1-port Gigabit modules and eight 4-port Fast Ethernet modules, both with copper or fiber optic connectors. Gigabit managed switch features 60Ã-
Read More »
Universal Communicator suits embedded applications.
With Linux pre-installed, Series UC-7400 RISC-based communications platform features Intel Xscale IXP-422 processor operating at 266 MHz, 8 RS-232/422/485 serial ports, and dual 10/100 Mbps Ethernet ports. It uses on-board flash for storage and CF for storage expansion. JFFS2 onboard flash disk protects against system crashes caused by unexpected power failures. Fanless communicator is...
Read More »
Redundant Ethernet Switches handle demanding environments.
EtherDevice(TM) Series EDS-508 consists of 8-port switches that provide 10/100BaseTX Ethernet and 100Fx Fiber optical connections. Intelligent switching services include IGMP Snooping, Virtual LAN, security, and quality-of-service. Units deliver both high-speed recovery self-healing Ethernet ring technology and Industrial Standard Rapid Spanning Tree Protocol- 802.1D/1w. They include passive...
Read More »
Embedded Network Enabler suits industrial serial devices.
Measuring 45 x 36 mm, NE-4100T offers complete Ethernet connectivity solution (TCP Server, TCP client, UDP) to network-enable serial devices. It includes built-in TCP/IP stack, 10/100M Ethernet auto-sensing interface, and 4 GPIO pins. Product's 5 V design incorporates TCP/IP communication firmware and dual-in-line 26-pin design with built-in transformer. Configuration is done via Windows utility,...
Read More »
Ethernet Switches help establish redundant ring.
Series EDS-405 includes relay output alarms and redundant dual 24 Vdc power inputs. Units provide plug-n-play Ethernet media redundancy solution that recovers Ethernet ring in less than 300 ms. Redundancy feature ensures that industrial automation and control applications will run non-stop. Series includes Model EDS-405 with five 10/100BaseT(X) ports; and Model EDS-405-MM with three...
Read More »
Modules network-enable serial devices.
Measuring 57 x 40 mm, Series NE-4120S/A Network Enablers consume less than 1.5 W and integrate into serial devices to make them 10/100M Ethernet-ready. By network-enabling serial devices, card reader/SCADA systems and controllers can access and gather real-time data from NE-4120S/A modules. TCP/IP stack supports TCP Server, TCP Client, UDP, and Real COM operation modes. Configuration is done with...
Read More »
Serial Boards feature multiports for PCI interface.
Multiport serial boards feature low profile Universal PCI interface, 64-byte FIFO driver, and ability to accept both 3.3 and 5 V server slots. CP-132U series has 2 RS-422/485 ports, CP-134U series has 4 RS-422/485 ports, CP-104UL series has 4 RS-232 ports, and CP-168U series has 8 RS-232 ports. Features include embedded 16 kV ESD surge protection, optional 2 kV optical isolation for RS-422/485,...
Read More »
Device Server provides serial-to-Ethernet connection.
NPort Express Model DE-211 features wide power input range that accepts 24 Vdc, terminal-block accessories, built-in terminator, and 2- and 4-wire RS-485 for long distance transmission up to 1.5 km. Unit comes with 3-in-1 RS-232/422/485 serial interface and can network-enable industrial serial devices, such as information display boards, PLCs, flow meters, gas meters, and CNC machines. Software...
Read More »
Ethernet Solutions suit PLC/SCADA system integrators.
MOXA EtherDevice Server(TM) includes Reliable Redundant Ring Connection, Line-Swap Fast Recovery, and Auto E-mail Warning features. EDS-SNMP OPC Server software package collects SNMP data from Ethernet then converts data to OPC format. MOXA EtherDevice(TM) Switch EDS-308/305 Series supports IEEE 802.3/802.3u/802.3x, and provides relay output alarm by power failure or port break. MOXA Industrial...
Read More »