Phihong USA Inc.

Fixed-Prong Wall Adapters are ENERGY STAR® EPS 2.0-compliant.
Electrical Equipment & Systems

Fixed-Prong Wall Adapters are ENERGY STAR® EPS 2.0-compliant.

Delivering 12 Vdc output, PSA12A-120-R and PSA12E-120-R 12 W wall-mount adapters are designed for use in USA and Europe respectively. They are double insulated, Class B EMI compliant, and have no-load power consumption of less than 0.3 W. Protected against over-voltage and short-circuit, products can operate in temperature range of 0-40°C and can tolerate up to 90% humidity. Applications...

Read More »
Phihong's 10W Interchangeable Plug Adapter Series Complies with ENERGY STAR®'s New EPS 2.0 Requirement
Electrical Equipment & Systems

Phihong's 10W Interchangeable Plug Adapter Series Complies with ENERGY STAR®'s New EPS 2.0 Requirement

Globally compatible adapters provide cost-effective, energy-efficient power solutions for OEM applications... FREMONT, Calif. -(January 22, 2009)-  Phihong USA, a global leader in power solutions, has announced that the 9V and 12V models in its 10W interchangeable plug series meet the new, more stringent ENERGY STAR® EPS 2.0 requirement, which went into effect November 1, 2008. All PSM11R...

Read More »
Electrical Equipment & Systems

Adapters have no-load power consumption of less than 0.5 W.

Suited for portable equipment, networking, peripherals, and gaming machines, both two-wire input PSAA60W-480 and three-wire input PSAA60M-480 comply with EISA, and bear cUL/UL, CE, and CB safety markings and approvals. Designed to operate between 0-40°C and between 10-90% humidity, adapters are offered in fully sealed, splash-proof cases that measure 5.12 x 2.36 x 1.3 in. and weigh 10.58...

Read More »
Energy-Efficient Adapter provides global compatibility.
Electrical Equipment & Systems

Energy-Efficient Adapter provides global compatibility.

Suited for OEM applications, PSA18R-120P is available with 4 interchangeable AC plugs that make it compatible with power outlets worldwide. This 18 W interchangeable plug adapter complies with ENERGY STAR® EPS 2.0 requirements as well as EISA no-load and active mode energy efficiency requirements. Measuring 2.82 x 1.97 x 1.31 in., product is Class II double-insulated, features Class B EMI...

Read More »
PoE Splitter powers cameras, heaters, and illuminators.
Electronic Components & Devices

PoE Splitter powers cameras, heaters, and illuminators.

Providing 12 V at 1.75 A, POE21-120F Gigabit-compatible splitter works with any Ultra PoE midspan, and offers power solution for camera, heaters, or illuminators through single Cat5 cable. It is isolated from PoE source by 1,500 Vac, and comes with non-vented case with 10BASE-T, 100BASE-T, and 1000BASE-T data rates, UNH IOL test report, and LED power indicator. Featuring full OCP-, OTP-, and...

Read More »
Adapter delivers up to 33.6 W power on single Ethernet port.
Electrical Equipment & Systems

Adapter delivers up to 33.6 W power on single Ethernet port.

Available with footprint of 5.51 x 2.55 x 1.42 in., POE36U-1AT, high-power, single port, power over Ethernet adapter provides fully compliant detection, disconnect, and voltage control. Incorporating diagnostic LEDs, cUL/UL and CE safety approved units offer full over-voltage and over-current protection. Gigabit-compatible adapters suit applications in IP telephones, wireless network access...

Read More »
Adapters are available with 12, 24, and 48 V outputs.
Electrical Equipment & Systems

Adapters are available with 12, 24, and 48 V outputs.

Including PSA120U-240 and PSA120U-480, PSA120U series of adapters feature universal AC inputs, IEC320 C14 inlet receptacles, 0 A minimum load, no-load power consumption of less than 0.5 W at 115 Vac input, and Class B electromagnetic interference compliance. Suited for networking, peripheral, industrial, and test and measurement applications, units measure 6.85 x 3.03 x 1.69 in. CE, cUL, UL, and...

Read More »
PoE Midspan and Splitter meet IEEE802.3at standard.
Electrical Equipment & Systems

PoE Midspan and Splitter meet IEEE802.3at standard.

Model POE60U-560G 60 W midspan can power wireless access point arrays and thin client computer terminals that require up to 52 W of low voltage dc power. Available in non-vented case with 10BASE-T, 100BASE-T, and 1000BASE-T data rates and UNH IOL test report, Model POE45-120 is 45 W dc-dc gigabit-compatible splitter that divides power and data and converts from PoE source to regulated low voltage...

Read More »
Interchangeable Plug Adapter has micro-USB output connector.
Electrical Equipment & Systems

Interchangeable Plug Adapter has micro-USB output connector.

Suited for mobile, portable, and wireless communication applications, PSM08R-050(M)-R is available with 4 interchangeable clip adapter plugs for worldwide compatibility. Supporting 90-264 Vac input, double-insulated 8 W adapter is rated +5 Vdc/1.6 A, provides short circuit as well as over voltage protection, and also meets ENERGY STAR® IV requirements and has received cUL/ULus, TUV, SAA,...

Read More »

All Topics