Maxon Precision Motors, Inc.
Taunton, MA 02780
Coaxial-Drive Planetary Gearhead offers low-noise operation.
Featuring OD of 32 mm, Koaxdrive KD 32 combines worm and planetary gearing, with worm-formed motor pinion driving 3 offset planetary wheels interlocking with internal gear. Plastic planetary wheels allow for minimized noise and coupling element is assembled on motor side so shaft is not subjected to axial load. Many reduction ratios are available in 11:1 to 1091:1 range and gearhead provides...
Read More »
DC Motor weighs less than 4 grams.
Measuring 8 mm in diameter and 16 mm in length, Model RE 8 features pencil-thin ceramic shaft that measures 0.8 mm in diameter and turns into 2 sleeve bearings. Precious metal brushes ensure constant and low contact resistance between brushes and commutator, even after pro-longed standstill. With ironless winding, motor is suitable for network-independent applications, such as lasers, leveling...
Read More »Brushless DC Motor achieves high torque at slow speeds.
Available in 2 lengths, EC-powermax 22 has operating range of 90-120 W and can be combined with 32 mm planetary gearheads using Maxon's modular system. Rotor is comprised of 2 pole pairs and fitted with magnetic material. For electronic commutation, magnetic field is sensed through Hall sensors, and rotor position detected. Product has no detent because of grooveless stator, optimizing control...
Read More »
Custom Precision Gearheads meet unique applications' needs.
Custom-made precision gearhead are designed for motors powerful enough for motion but offering too much speed and too little torque. Planetary and spur gearheads, available in 600+ variations with diameters from 6-81 mm, include planetary gearhead with 2 speeds on output side. Motor shaft goes through gearhead, resulting in 2 speeds with mechanically fixed reduction ratio. Worm gearheads and...
Read More »Brushed DC Motor delivers 250 W and reaches 90% efficiency.
Constructed with ironless rotor and 4-pole structure of Neodymium permanent magnets, mechanically commutated RE65 works detent-free and has minimal rotor inertia. Preloaded ball bearings support low-vibration and low-noise operation, and nominal voltage is in 18-70 V range. Depending on winding variation, 65 mm dia x 130 mm long cylindrical drive delivers nominal torque of 0.5-0.9 Nm at nominal...
Read More »Brushless DC Motors feature integrated electronics.
Available in 2-wire and 5-wire versions with operating range of 2-50 W, Models EC 20 flat, EC 32 flat, and EC 45 flat include Hall sensors and 1-quadrant speed controller. In 2-wire version, speed acts proportionately to applied operating voltage of 10-28 V. Current limitation, under and over-voltage switch-off, and temperature monitoring are implemented as standard in all models. Motors are...
Read More »
Powerful High Speed Brushless Motors
16 mm DC micromotors with speeds of up to 60,000 rpm Fall River, MA -maxon's EC16 is a brushless DC motor with a diameter of only 16mm, a length of 56mm and a power rating of 40 Watt! The speed range of this fast running motor is from 0 to 60,000 rpm. Lower speeds and a corresponding high torque can be implemented with a planetary gear from the maxon modular system. Brushless DC motors need the...
Read More »Digital Positioning Controllers cover range from 1-700 W.
Designed to control brush/brushless dc motors, Series EPOS2 features 32-bit DSP technology and potential-separated digital I/O for protection against EMI. Interpolated position mode enables units to synchronously run path specified through interpolation points dynamically and accurately. With suitable master, coordinated multi-axis movements and any profile can be carried out in 1-axis system....
Read More »
All-Inclusive Package enables motion control development.
Designed to eliminate confusion associated with motion systems integration, single-axis Freedom Series(TM) comes complete with choice of 4 different brushless motor options ranging in size from 16-40 mm in diameter and up to 1/6 hp. All-inclusive, plug-and-play system is also equipped with GUI software and instructional wizards as well as appropriate cables and connectors.
Read More »
Speed Controller drives brushless dc motors.
With input voltage range of 10-50 V, DECS 50/5 drives brushless dc motors without Hall sensors. In continuous operation, output current of 5 A of power stage is permissible, giving unit max output performance of 250 W. Speed value can be set via integrated potentiometer or analog set value, and amplifier can be operated at max speed of 80,000 rpm. Model DECS 50/5 also provides control inputs for...
Read More »