Maxon Precision Motors, Inc.
Taunton, MA 02780
Motor Positioning Controller offers various operating modes.
Model EPOS2 70/10 drives DC brush motors with encoders or brushless EC motors with Hall sensors and encoders, from 5-700 W power. It includes Step/Direction Mode for motor movement, Master Encoder Mode for use in electronic gearing applications, and Interpolated Position Mode for synchronously running path specified by interpolating points. Regulation Tuning helps adjust current, velocity, or...Read More »
Maxon's Collaboration with National Instruments
Maxon Precision Motors (Fall River, MA), a leader in electric motor technology and motion control products, is pleased to announce a strategic collaboration with National Instruments (Austin, TX). The initiative will look to highlight mutual areas of interest in the field of robotics. An informal relationship between the two companies was initiated as early as 2006, with the inclusion of NI...Read More »
Motor Drive delivers nominal speed of 2,800-5,700 rpm.
Featuring 2-pole Neodymium permanent magnet and ironless rotor that ensures detent-free running, RE 50 reaches nominal torque of up to 0.38 Nm with efficiency of more than 90%. Drive measures Ã50 x 108 mm and is available with 4 different windings. With low nominal voltage of 24.70 Vdc and high power density, unit suits battery-powered applications, such as electric vehicles, mobile systems,...Read More »
Brushless High Speed DC Motor delivers 250 W output power.
Available with footprint of Ã25 x 84 mm, brushless EC 25 is designed for high speed applications of up to 70,000 rpm. Equipped with preloaded ball bearings and 2 pole Neodymium permanent magnet, unit is rated for nominal voltage of 36 Vdc and reaches nominal torque of up to 42.2 mNm, nominal speed 61,600 rpm. Motor-specific speed/torque gradient amounts to 44.9 rpm/mNm. Suitable applications...Read More »
Brushless Motor offers nominal speed of 61,600 rpm.
Measuring 25 mm in dia x 84 mm long, 250 W Model EC 25 offers friction-reduced, low-vibration operation over entire speed range. Rotor is equipped with preloaded ball bearings and 2-pole neodymium permanent magnet. With efficiency above 93% and speed/torque gradient of 44.9 rpm/mNm, motor is suited for high-speed, spindle-driven applications as required in medical technology or machine tools.Read More »
Flat Motor offers high nominal torque of up to 0.83 mNm.
Measuring Ã10 x 12.5 mm, EC 9.2 Flat motor has 10 mm OD that includes protective cover to protect against contact and as mounting aid during installation of motor. It provides stall torque of up to 1.29 mNm and is equipped with 8-pole Neodymium permanent magnet and preloaded ball bearings. Available with or without Hall sensors, drive meets ISO 13485 medical technology quality standard and...Read More »
Miniaturized Inductive Encoder measures only 6 mm in diameter.
Developed for use with micromotors, MILE encoder delivers 64 pulses at up to 120,000 rpm, and has 3 channels, line driver, and integrated commutation outputs. Typical applications include medical technology, robotics and industrial applications in harsh environments. Encoder is also available in combination with EC6 brushless DC motor, extending length of combination by only 1 mm.Read More »
Digital Amplifier Module permits multifunctional operation.
Miniaturized DEC Module 24/2 is digital 1-quadrant amplifier with speed controller for brushless EC motors with Hall Sensors up to 48 W and surface area measuring less than 5 cm-². It has supply voltage range of 8-24 Vdc (alternatively 5 Vdc) and continuous output current of 2 A. Designed for maximum motor speed of 80,000 rpm, amplifier has 2 connector arrays arranged in 2.54 mm pattern for...Read More »
Sterilizable Motors can be used with or without gearheads.
Designed for high speed medical applications of up to 90,000 rpm, EC Size 5 and EC 13 drives feature low-noise and low-vibration operation. Size 5 motor and gearhead measures -½ in. OD, with shaft of 0.125 in., and motor has servo mount. EC13/GP13 version has 13 mm OD, 3 mm shaft, and flange mount with 3 face side threads. Both models offer sterilizability of 500 autoclave cycles (typ) and are...Read More »
OEM Motor Drive provides positioning control.
Measuring 54 x 28 x 9 mm, Model EPOS2 36/2 controls brush DC motors as well as brushless EC motors, and is suited for single-axis and multiple-axis applications of miniature size. Plug-in module can be operated as speed controller or current controller in addition to position controller. Providing 36 V, 2 Amp operation, drive is designed to command and control within CANopen network, but can also...Read More »