Phidgets, Inc

I/O Board supports variable DAQ rates on analog inputs.
Architectural & Civil Engineering Products

I/O Board supports variable DAQ rates on analog inputs.

Model 1018 - PhidgetInterfaceKit 8/8/8 allows sampling speed to be set at 1, 2, 4, 8, and multiples of 8 msec, up to 1,000 msec, for each analog input on board. Update rate is 1,000 samples/sec maximum for 4 channels and 500 samples/sec maximum for all 8 channels. On digital inputs and outputs, update rate is 125 samples/sec. Board includes 5 V terminal block and also allows users to program...

Read More »
Sound Sensor measures presence and loudness of sound.
Sensors, Monitors & Transducers

Sound Sensor measures presence and loudness of sound.

With current consumption of 8.5 mA, Model 1133 measures sound pressure level between 50-100 dB in input frequency range of 100 Hz to 8 kHz. Typical examples of sounds that can be measured include calm breathing, normal conversation at 1 m away, passenger car 10 m away, traffic on busy road 10 m away, and jack hammer 1 m away. Plug-and-play sensor can be programmed using API that is supported...

Read More »
Switchable Voltage Divider features 8 resistors.
Agricultural & Farming Products

Switchable Voltage Divider features 8 resistors.

Model 1134 Switchable Voltage Divider has 8 resistors that can be individually switched on or off, allowing multiple switches to be flipped and corresponding resistors to be paralleled. It also provides interface to non-Phidgets variable resistance sensors. With current consumption up to 30 mA and supply voltage of 3.0-5.25 Vdc, unit offers switchable resistance up to 1 million W and variable...

Read More »
ORP/pH Sensor connects directly to interface boards.
Sensors, Monitors & Transducers

ORP/pH Sensor connects directly to interface boards.

Able to connect to analog input on PhidgetInterface board, 1130 is completely plug-and-play and can be programmed via API supported under Windows, Mac, and Linux. Users can connect pH or ORP glass electrodes via adapter's BNC connector, and on-board DIP switch allows selection of pH or ORP mode of operation. While pH input range is -400 to +400 mV with resolution of 1 pH/54.4 SensorValue, ORP...

Read More »
LED Controller supports LEDs from IR to UV.
Agricultural & Farming Products

LED Controller supports LEDs from IR to UV.

Designed to independently control up to 64 LEDs requiring 20-80 mA, 1031-PhidgetLED-64 Advanced comes with 12 Vdc, 2 A power supply and LED cables. Unit features max forward voltage of 5 V, brightness changes at 700 updates/sec, and LED On/Off at 3,000 updates/sec. Plug-and-play unit is programmed using API supported under Windows 2000/XP/Vista/CE, Mac OS X, and Linux. Users can write programs in...

Read More »
Force Sensor Adapter interfaces sensors to PC.
Electrical Equipment & Systems

Force Sensor Adapter interfaces sensors to PC.

Model 1120 - FlexiForce Adapter connects to one of analog inputs on 1018 - PhidgetInterfaceKit 8/8/8. It is designed for use with FlexiForce sensor, which can measure force between almost any two surfaces and is durable enough for most environments. Featuring supply voltage range of 4.5-5.25 Vdc, adapter has current consumption at maximum load of 3.20 mA and consumes 10.9 mA at overload. Unit is...

Read More »
Single Board Computer connects via Ethernet or WiFi.
Computer Hardware & Peripherals

Single Board Computer connects via Ethernet or WiFi.

Equipped with 266 MHz CPU and 64 MB SDRAM, 1070 - PhidgetSBC provides 4 USB full-speed ports that allow use of normal USB Phidgets over network connection, extending effective range of from USB's max of 15 ft to anywhere that network reaches. Integrated PhidgetInterfaceKit 8/8/8 allows user to connect devices to any of 8 analog inputs, 8 digital inputs, and 8 digital outputs. PhidgetSBC can...

Read More »
Interface Kit features integrated 6-port USB hub.
Architectural & Civil Engineering Products

Interface Kit features integrated 6-port USB hub.

With 1019 PhidgetInterfaceKit 8/8/8, users can connect devices to any of 8 analog inputs, 8 digital inputs, and 8 digital outputs. System provides way to interface PC with various devices such as analog sensors, push buttons, limit switches, relays, and lights. Since power is not transferred from PC-USB bus to downstream ports, power supply is provided to support additional USB devices. Each USB...

Read More »

All Topics