Phidgets, Inc

Dongle-Sized Interface Kit offers analog inputs and DIO.
Architectural & Civil Engineering Products

Dongle-Sized Interface Kit offers analog inputs and DIO.

Completely plug-and-play, 1011 - PhidgetInterfaceKit 2/2/2 provides 2 analog inputs, 2 digital inputs, and 2 digital outputs on dongle-sized board that supports USB voltage from 4.75-5.25 Vdc. Respective update rates for analog inputs and DIO lines are 1,000 and ~125 samples/sec. Solution comes with custom 12-wire cable, where wires 1/2/3 and 7/8/9 end with female connector designed to take...

Read More »
USB GPS Module offers plug-and-play functionality.
Test & Measurement

USB GPS Module offers plug-and-play functionality.

Delivering 10 position updates per second, plug-and-play 1040 PhidgetGPS provides position (longitude, latitude, altitude); heading; velocity; time and date; and satellite fix availability. Position accuracy is 2.5 m CEP, velocity accuracy is 0.1 m/sec, and timing accuracy is 300 nsec. Max altitude and velocity (Standard COCOM Limits) are greater than 18,000 m @ greater than 515 m/sec. GPS...

Read More »
Digital Controller accommodates of 0-10 V devices.
Agricultural & Farming Products

Digital Controller accommodates of 0-10 V devices.

Intended for control of 0-10 V devices, 1002 - PhidgetAnalog 4-Output can produce -10 to +10 V at up to 20 mA on any or all of its 4 channels. Output voltage resolution is 4.8 mV (12 bit), and respective output impedance values with channel enabled and not enabled are 0.5 and 4k ohms. Along with capacitive load stability of 4,000 pF, characteristics include 4.5-5.25 Vdc USB voltage range, 300 mA...

Read More »
I/O Board supports variable DAQ rates on analog inputs.
Architectural & Civil Engineering Products

I/O Board supports variable DAQ rates on analog inputs.

Model 1018 - PhidgetInterfaceKit 8/8/8 allows sampling speed to be set at 1, 2, 4, 8, and multiples of 8 msec, up to 1,000 msec, for each analog input on board. Update rate is 1,000 samples/sec maximum for 4 channels and 500 samples/sec maximum for all 8 channels. On digital inputs and outputs, update rate is 125 samples/sec. Board includes 5 V terminal block and also allows users to program...

Read More »
Sound Sensor measures presence and loudness of sound.
Sensors, Monitors & Transducers

Sound Sensor measures presence and loudness of sound.

With current consumption of 8.5 mA, Model 1133 measures sound pressure level between 50-100 dB in input frequency range of 100 Hz to 8 kHz. Typical examples of sounds that can be measured include calm breathing, normal conversation at 1 m away, passenger car 10 m away, traffic on busy road 10 m away, and jack hammer 1 m away. Plug-and-play sensor can be programmed using API that is supported...

Read More »
Switchable Voltage Divider features 8 resistors.
Agricultural & Farming Products

Switchable Voltage Divider features 8 resistors.

Model 1134 Switchable Voltage Divider has 8 resistors that can be individually switched on or off, allowing multiple switches to be flipped and corresponding resistors to be paralleled. It also provides interface to non-Phidgets variable resistance sensors. With current consumption up to 30 mA and supply voltage of 3.0-5.25 Vdc, unit offers switchable resistance up to 1 million W and variable...

Read More »
ORP/pH Sensor connects directly to interface boards.
Sensors, Monitors & Transducers

ORP/pH Sensor connects directly to interface boards.

Able to connect to analog input on PhidgetInterface board, 1130 is completely plug-and-play and can be programmed via API supported under Windows, Mac, and Linux. Users can connect pH or ORP glass electrodes via adapter's BNC connector, and on-board DIP switch allows selection of pH or ORP mode of operation. While pH input range is -400 to +400 mV with resolution of 1 pH/54.4 SensorValue, ORP...

Read More »
LED Controller supports LEDs from IR to UV.
Agricultural & Farming Products

LED Controller supports LEDs from IR to UV.

Designed to independently control up to 64 LEDs requiring 20-80 mA, 1031-PhidgetLED-64 Advanced comes with 12 Vdc, 2 A power supply and LED cables. Unit features max forward voltage of 5 V, brightness changes at 700 updates/sec, and LED On/Off at 3,000 updates/sec. Plug-and-play unit is programmed using API supported under Windows 2000/XP/Vista/CE, Mac OS X, and Linux. Users can write programs in...

Read More »
Interface Kit features integrated 6-port USB hub.
Architectural & Civil Engineering Products

Interface Kit features integrated 6-port USB hub.

With 1019 PhidgetInterfaceKit 8/8/8, users can connect devices to any of 8 analog inputs, 8 digital inputs, and 8 digital outputs. System provides way to interface PC with various devices such as analog sensors, push buttons, limit switches, relays, and lights. Since power is not transferred from PC-USB bus to downstream ports, power supply is provided to support additional USB devices. Each USB...

Read More »
Dongle-Sized Interface Kit offers analog inputs and DIO.
Architectural & Civil Engineering Products

Dongle-Sized Interface Kit offers analog inputs and DIO.

Completely plug-and-play, 1011 - PhidgetInterfaceKit 2/2/2 provides 2 analog inputs, 2 digital inputs, and 2 digital outputs on dongle-sized board that supports USB voltage from 4.75-5.25 Vdc. Respective update rates for analog inputs and DIO lines are 1,000 and ~125 samples/sec. Solution comes with custom 12-wire cable, where wires 1/2/3 and 7/8/9 end with female connector designed to take...

Read More »
USB GPS Module offers plug-and-play functionality.
Test & Measurement

USB GPS Module offers plug-and-play functionality.

Delivering 10 position updates per second, plug-and-play 1040 PhidgetGPS provides position (longitude, latitude, altitude); heading; velocity; time and date; and satellite fix availability. Position accuracy is 2.5 m CEP, velocity accuracy is 0.1 m/sec, and timing accuracy is 300 nsec. Max altitude and velocity (Standard COCOM Limits) are greater than 18,000 m @ greater than 515 m/sec. GPS...

Read More »
Digital Controller accommodates of 0-10 V devices.
Agricultural & Farming Products

Digital Controller accommodates of 0-10 V devices.

Intended for control of 0-10 V devices, 1002 - PhidgetAnalog 4-Output can produce -10 to +10 V at up to 20 mA on any or all of its 4 channels. Output voltage resolution is 4.8 mV (12 bit), and respective output impedance values with channel enabled and not enabled are 0.5 and 4k ohms. Along with capacitive load stability of 4,000 pF, characteristics include 4.5-5.25 Vdc USB voltage range, 300 mA...

Read More »
I/O Board supports variable DAQ rates on analog inputs.
Architectural & Civil Engineering Products

I/O Board supports variable DAQ rates on analog inputs.

Model 1018 - PhidgetInterfaceKit 8/8/8 allows sampling speed to be set at 1, 2, 4, 8, and multiples of 8 msec, up to 1,000 msec, for each analog input on board. Update rate is 1,000 samples/sec maximum for 4 channels and 500 samples/sec maximum for all 8 channels. On digital inputs and outputs, update rate is 125 samples/sec. Board includes 5 V terminal block and also allows users to program...

Read More »
Sound Sensor measures presence and loudness of sound.
Sensors, Monitors & Transducers

Sound Sensor measures presence and loudness of sound.

With current consumption of 8.5 mA, Model 1133 measures sound pressure level between 50-100 dB in input frequency range of 100 Hz to 8 kHz. Typical examples of sounds that can be measured include calm breathing, normal conversation at 1 m away, passenger car 10 m away, traffic on busy road 10 m away, and jack hammer 1 m away. Plug-and-play sensor can be programmed using API that is supported...

Read More »
Switchable Voltage Divider features 8 resistors.
Agricultural & Farming Products

Switchable Voltage Divider features 8 resistors.

Model 1134 Switchable Voltage Divider has 8 resistors that can be individually switched on or off, allowing multiple switches to be flipped and corresponding resistors to be paralleled. It also provides interface to non-Phidgets variable resistance sensors. With current consumption up to 30 mA and supply voltage of 3.0-5.25 Vdc, unit offers switchable resistance up to 1 million W and variable...

Read More »
ORP/pH Sensor connects directly to interface boards.
Sensors, Monitors & Transducers

ORP/pH Sensor connects directly to interface boards.

Able to connect to analog input on PhidgetInterface board, 1130 is completely plug-and-play and can be programmed via API supported under Windows, Mac, and Linux. Users can connect pH or ORP glass electrodes via adapter's BNC connector, and on-board DIP switch allows selection of pH or ORP mode of operation. While pH input range is -400 to +400 mV with resolution of 1 pH/54.4 SensorValue, ORP...

Read More »
LED Controller supports LEDs from IR to UV.
Agricultural & Farming Products

LED Controller supports LEDs from IR to UV.

Designed to independently control up to 64 LEDs requiring 20-80 mA, 1031-PhidgetLED-64 Advanced comes with 12 Vdc, 2 A power supply and LED cables. Unit features max forward voltage of 5 V, brightness changes at 700 updates/sec, and LED On/Off at 3,000 updates/sec. Plug-and-play unit is programmed using API supported under Windows 2000/XP/Vista/CE, Mac OS X, and Linux. Users can write programs in...

Read More »
Interface Kit features integrated 6-port USB hub.
Architectural & Civil Engineering Products

Interface Kit features integrated 6-port USB hub.

With 1019 PhidgetInterfaceKit 8/8/8, users can connect devices to any of 8 analog inputs, 8 digital inputs, and 8 digital outputs. System provides way to interface PC with various devices such as analog sensors, push buttons, limit switches, relays, and lights. Since power is not transferred from PC-USB bus to downstream ports, power supply is provided to support additional USB devices. Each USB...

Read More »

All Topics