Dynamic Robotic Solutions Inc.

Robotic Knife Trimming System offers turnkey operation.
Agricultural & Farming Products

Robotic Knife Trimming System offers turnkey operation.

Trimming parts up to 24 x 24 x 30 in. via automated process, RoboKnife(TM) RT-200 promotes part quality while reducing scrap and injuries. System incorporates riser-mounted robot and servo-controlled rotating fixture table in 3 x 9.5 ft footprint and features single-base construction for portability. Lending flexibility to plastics manufacturers' trimming processes, knife compensates for part...

Read More »
Agricultural & Farming Products

Router Trimming System provides means to trim large parts.

Equipped with 2 riser-mounted KMT AccuTrim R-110 robots inside steel enclosure, RoboTrim® RT-1200 features 2-sided, 12 ft rotating table that can support up to 1,000 lb on each side and accommodate part sizes up to 9 x 2 ft. Two-position table gives operators ability to load or unload parts on outside of cell while robot is trimming on inside. RouterVac® vacuum system keeps trimming...

Read More »
Software

Offline Programming Software facilitates robotic milling.

With ability to manage large files through robot memory that enables it to mill solid blocks of foam, wood, and REN board, CamPro(TM) PC-based offline programming software allows manufacturers to seamlessly convert CAM trimming and milling paths into complete 6-axis robot programs. Software is available in 2 versions, one that supports conversion of Mastercam® programs and another that...

Read More »
Agricultural & Farming Products

Robotic Router handles large part trimming.

Design for automated trimming of plastics and composites, RoboTrim® RT-1900 features inverted, rail-mounted KMT AccuTrim® R-110 robot inside steel enclosure with side access door and safety interlocks. Rail permits robot to move up to 4.5 m, and 2-sided, 19 ft rotating servo table supports up to 700 lb on each side while accommodating parts up to 13 x 5 ft. Various safety features,...

Read More »
Agricultural & Farming Products

Waterjet Trimming System comes with robot controller.

Designed for waterjet trimming of headliners, carpets, dashboards, and insulation products in automotive interior industry, Cutting Box Original V can be customized to meet specific trimming needs, and comes with IRC5 robot controller for single and multi move operation. System can be equipped with 6 different and pre-designed robot configurations. It features HMI, tailor-made vacuum systems, and...

Read More »
Agricultural & Farming Products

KMT Robotic Solutions and Branson Ultrasonics Corp. Partner to Create Automated Soft Part Trimming Solution

AUBURN HILLS, Mich. Sept. 16, 2007 - KMT Robotic Solutions Inc. and Branson Ultrasonics Corp. have teamed to create cost effective, automated ultrasonic knife trimming systems that easily move through soft parts that were previously difficult to trim. The partnership between KMT and Branson Ultrasonics Corp. is an ideal opportunity to bring together outstanding technologies from the two...

Read More »
Robotic Knife Trimming System offers turnkey operation.
Agricultural & Farming Products

Robotic Knife Trimming System offers turnkey operation.

Trimming parts up to 24 x 24 x 30 in. via automated process, RoboKnife(TM) RT-200 promotes part quality while reducing scrap and injuries. System incorporates riser-mounted robot and servo-controlled rotating fixture table in 3 x 9.5 ft footprint and features single-base construction for portability. Lending flexibility to plastics manufacturers' trimming processes, knife compensates for part...

Read More »
Agricultural & Farming Products

Router Trimming System provides means to trim large parts.

Equipped with 2 riser-mounted KMT AccuTrim R-110 robots inside steel enclosure, RoboTrim® RT-1200 features 2-sided, 12 ft rotating table that can support up to 1,000 lb on each side and accommodate part sizes up to 9 x 2 ft. Two-position table gives operators ability to load or unload parts on outside of cell while robot is trimming on inside. RouterVac® vacuum system keeps trimming...

Read More »
Software

Offline Programming Software facilitates robotic milling.

With ability to manage large files through robot memory that enables it to mill solid blocks of foam, wood, and REN board, CamPro(TM) PC-based offline programming software allows manufacturers to seamlessly convert CAM trimming and milling paths into complete 6-axis robot programs. Software is available in 2 versions, one that supports conversion of Mastercam® programs and another that...

Read More »
Agricultural & Farming Products

Robotic Router handles large part trimming.

Design for automated trimming of plastics and composites, RoboTrim® RT-1900 features inverted, rail-mounted KMT AccuTrim® R-110 robot inside steel enclosure with side access door and safety interlocks. Rail permits robot to move up to 4.5 m, and 2-sided, 19 ft rotating servo table supports up to 700 lb on each side while accommodating parts up to 13 x 5 ft. Various safety features,...

Read More »
Agricultural & Farming Products

Waterjet Trimming System comes with robot controller.

Designed for waterjet trimming of headliners, carpets, dashboards, and insulation products in automotive interior industry, Cutting Box Original V can be customized to meet specific trimming needs, and comes with IRC5 robot controller for single and multi move operation. System can be equipped with 6 different and pre-designed robot configurations. It features HMI, tailor-made vacuum systems, and...

Read More »
Agricultural & Farming Products

KMT Robotic Solutions and Branson Ultrasonics Corp. Partner to Create Automated Soft Part Trimming Solution

AUBURN HILLS, Mich. Sept. 16, 2007 - KMT Robotic Solutions Inc. and Branson Ultrasonics Corp. have teamed to create cost effective, automated ultrasonic knife trimming systems that easily move through soft parts that were previously difficult to trim. The partnership between KMT and Branson Ultrasonics Corp. is an ideal opportunity to bring together outstanding technologies from the two...

Read More »
People in the News

KMT Robotic Solutions Appoints Corey Pierce KMT Robotic Solutions Inc. Controller

AUBURN HILLS, Mich. Sept.16, 2007 - KMT Robotic Solutions Inc. Vice President of Finance Bob Offer announced the appointment of Corey Pierce to the position of Controller. As Controller, Pierce will provide financial support and guidance in the management of daily operations for KMT Robotic Solutions. His core responsibilities include general accounting and finance, financial reporting and...

Read More »
Company News

KMT Robotic Solutions Launches New Website

KMT Robotic Solutions, the robotics business area of the KMT Group AB, announced today the unveiling of its new web site within the Group website: http://www.kmtgroup.com/robotic KMT Robotic Solutions designed the new site to help visitors learn about robotic waterjet, router, laser and knife trimming, cleaning, dispensing, arc welding and material handling processes, as well as to give them...

Read More »
People in the News

KMT Robotic Solutions Appoints Jeff Connell Auburn Hills Plant Manager

AUBURN HILLS, MIch. July 10, 2007 - KMT Robotic Solutions, Inc. General Manager Jerry Kuhn announced the appointment of Jeff Connell to the position of plant manager. In his new role, Connell oversees all activities related to manufacturing as well as facility and grounds maintenance. Jeff's experience with lean manufacturing will help us streamline our processes and maintain our focus on on-time...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers