Amada Wasino America, Inc.
Rolling Meadows, IL 60008
Share:
CNC Lathe can use oil- or water-based cutting fluid.
Offered with integrated parts unloader, Model JD-1 has fully synchronized spindles that transfer parts on the fly between main and sub-spindles. Unit utilizes pre-engineered gantry loader, cast iron beds with hardened and ground box ways, and double sets of angular contact bearings. Controller includes .00001 in. X and Z offset control capability. Bar capacity is 1.25 in., main and sub-spindle...
Read More »Gang-Type Lathe offers 4-axis twin slides.
Model GG5, suitable for high-speed A/B operations, incorporates twin spindles that operate at rates to 8,000 rpm. Travel for X-axis is 3.66 in. per slide, while travel for Z-axis is 6.86 in. per slide. Both axes offer rapid traverse rates of 600 ipm. SR-00 gantry loader has Fanuc AC servo, with vertical and horizontal rapid traverse rates of 3,200 and 4,356 ipm, respectively. CNC control includes...
Read More »CNC Lathe operates at spindle speeds up to 8,000 rpm.
Twin-spindle Model JJ-1 offers AA and AB operation. Gantry loader features Fanuc AC servo, with vertical and horizontal rapid traverse rates of 3,200 and 4,356 ipm, respectively. Loading/unloading time is 5 sec. CNC control includes .00001 in. X- and Z-offset control capability to allow for finer adjustment of machining tolerances. Spindle motor is 7.5 hp; X- and Z-axis travels are 3.95 and 8.66...
Read More »Forming Grinder provides positioning accuracy of 0.0000018 in.
Winstar CNC Grinder has built-in active thermal feedback monitoring system that ensures stable temperatures in main spindle and motor, x-axis ball screw, and coolant system. Oil-cooled spindle motor of 3.7 kW-4P promotes precision. Front is supported with combined quadruple 55 mm angular bearings. Numerical Intelligent Controller provides conversational programming and canned cycles that can be...
Read More »CNC Lathe includes sub-spindle for increased capacity.
Main spindle of Model JD-3 offers 2 in. diameter bar capacity. Unit's synchronized main and sub-spindles complete both rough and finishing operations, allowing lathe to transfer parts on the fly between spindles. Main and sub-spindle speeds reach 4,000 rpm, with 15 and 5 hp motors. Able to be used in stand-alone situations and integrated into flexible transfer lines, JD-3 incorporates controller...
Read More »Turning Center features 8 in. chuck and 2 in. bar capacity.
Model J-3 has cast-iron beds, with hardened and ground box ways, and double sets of angular contact bearings to ensure precision. CNC control includes .00001 in. X and Z offset control capability to allow for finer adjustment of machining tolerances. Loader features Fanuc AC servo with vertical and horizontal rapid traverse rates of 3200 and 4728 ipm, respectively. Spindle motor is 15 hp and...
Read More »Optical Profile Grinder facilitates set-up.
CNC Model GLS-250C includes teach and grind system that enables operators to program unit to grind curved profiles of tools and small workpieces. For quality control, monitor and built-in comparator allow workpiece inspection. Unit is also capable of unattended profile grinding. Automatic feed-rate control and angular-grinding radius function are optional. Applications include cutting tool, die...
Read More »CNC Gang-Type Lathe offers sub-micron accuracy.
Model G05UP holds 1 micron in cylindricity, roundness, and positioning. Built with precision-type integral motor, unit also incorporates built-in active thermal feedback monitoring system and isolated automation package. Equipped with floor type loader, G05UP offers .00001 in. X and Z offset capability. Spindle speeds reach 12,000 rpm, travel for X- and Z-axes is 8.66 in, and traverse rate is 600...
Read More »CNC Lathe has twin spindles for increased productivity.
Gang-type Model GW5 provides throughputs as fast as 7.5 sec per part, including part loading and unloading time. Two parts are loaded and unloaded simultaneously with SR-00 gantry loader. Loading/unloading time is 5 sec. Unit may be used in stand-alone situations or integrated into flexible transfer lines. Applications include secondary operations and powdered metal die cast parts, cold head...
Read More »Gang-Type Lathe provides 8000 rpm operation.
Model G05 CNC lathe features Fanuc AC servo with vertical and horizontal rapid traverse rates of 3,200 and 4,356 ipm, respectively. Loading/unloading time is 4 s. Lathe is equally effective in stand-alone situations and when integrated into transfer lines. Heavy cast iron beds with hardened and ground box ways and double sets of angular contact bearings ensure precision. Controller includes...
Read More »Wasino Corp. USA Becomes Amada Wasino America, Inc.
Rolling Meadows, IL -Wasino Corp. USA is now Amada Wasino America, Inc. As part of the Amada Group, this change brings dynamic manufacturing resources and a high standard in customer service to the industry. Amada Wasino will provide our customers with even more advanced technical solutions and a complete commitment to support, said Bob Malmen, Chief Operating Officer at Amada Wasino. Amada...
Read More »CNC Lathe can use oil- or water-based cutting fluid.
Offered with integrated parts unloader, Model JD-1 has fully synchronized spindles that transfer parts on the fly between main and sub-spindles. Unit utilizes pre-engineered gantry loader, cast iron beds with hardened and ground box ways, and double sets of angular contact bearings. Controller includes .00001 in. X and Z offset control capability. Bar capacity is 1.25 in., main and sub-spindle...
Read More »Gang-Type Lathe offers 4-axis twin slides.
Model GG5, suitable for high-speed A/B operations, incorporates twin spindles that operate at rates to 8,000 rpm. Travel for X-axis is 3.66 in. per slide, while travel for Z-axis is 6.86 in. per slide. Both axes offer rapid traverse rates of 600 ipm. SR-00 gantry loader has Fanuc AC servo, with vertical and horizontal rapid traverse rates of 3,200 and 4,356 ipm, respectively. CNC control includes...
Read More »CNC Lathe operates at spindle speeds up to 8,000 rpm.
Twin-spindle Model JJ-1 offers AA and AB operation. Gantry loader features Fanuc AC servo, with vertical and horizontal rapid traverse rates of 3,200 and 4,356 ipm, respectively. Loading/unloading time is 5 sec. CNC control includes .00001 in. X- and Z-offset control capability to allow for finer adjustment of machining tolerances. Spindle motor is 7.5 hp; X- and Z-axis travels are 3.95 and 8.66...
Read More »Forming Grinder provides positioning accuracy of 0.0000018 in.
Winstar CNC Grinder has built-in active thermal feedback monitoring system that ensures stable temperatures in main spindle and motor, x-axis ball screw, and coolant system. Oil-cooled spindle motor of 3.7 kW-4P promotes precision. Front is supported with combined quadruple 55 mm angular bearings. Numerical Intelligent Controller provides conversational programming and canned cycles that can be...
Read More »CNC Lathe includes sub-spindle for increased capacity.
Main spindle of Model JD-3 offers 2 in. diameter bar capacity. Unit's synchronized main and sub-spindles complete both rough and finishing operations, allowing lathe to transfer parts on the fly between spindles. Main and sub-spindle speeds reach 4,000 rpm, with 15 and 5 hp motors. Able to be used in stand-alone situations and integrated into flexible transfer lines, JD-3 incorporates controller...
Read More »Turning Center features 8 in. chuck and 2 in. bar capacity.
Model J-3 has cast-iron beds, with hardened and ground box ways, and double sets of angular contact bearings to ensure precision. CNC control includes .00001 in. X and Z offset control capability to allow for finer adjustment of machining tolerances. Loader features Fanuc AC servo with vertical and horizontal rapid traverse rates of 3200 and 4728 ipm, respectively. Spindle motor is 15 hp and...
Read More »Optical Profile Grinder facilitates set-up.
CNC Model GLS-250C includes teach and grind system that enables operators to program unit to grind curved profiles of tools and small workpieces. For quality control, monitor and built-in comparator allow workpiece inspection. Unit is also capable of unattended profile grinding. Automatic feed-rate control and angular-grinding radius function are optional. Applications include cutting tool, die...
Read More »CNC Gang-Type Lathe offers sub-micron accuracy.
Model G05UP holds 1 micron in cylindricity, roundness, and positioning. Built with precision-type integral motor, unit also incorporates built-in active thermal feedback monitoring system and isolated automation package. Equipped with floor type loader, G05UP offers .00001 in. X and Z offset capability. Spindle speeds reach 12,000 rpm, travel for X- and Z-axes is 8.66 in, and traverse rate is 600...
Read More »CNC Lathe has twin spindles for increased productivity.
Gang-type Model GW5 provides throughputs as fast as 7.5 sec per part, including part loading and unloading time. Two parts are loaded and unloaded simultaneously with SR-00 gantry loader. Loading/unloading time is 5 sec. Unit may be used in stand-alone situations or integrated into flexible transfer lines. Applications include secondary operations and powdered metal die cast parts, cold head...
Read More »