EMAG L.L.C.

Visit EMAG at Gear Expo 2017 in Booth 1107!
Machinery & Machining Tools

Visit EMAG at Gear Expo 2017 in Booth 1107!

At Gear Expo 2017, October 24-26 at Greater Columbus Convention Center in Columbus, OH EMAG USA will feature manufacturing systems for precision metal components with a special focus on its efficient and diverse solutions for gear manufacturing. The modular VL Series for chucked components will be on display, with our VL 4 machine, for visitors to experience the successful EMAG modular inverted...

Read More »
Visit EMAG at South-Tec 2017 in Booth 1629!
Machinery & Machining Tools

Visit EMAG at South-Tec 2017 in Booth 1629!

At South-Tec 2017, October 24-26 at the TD Exposition Center in Greenville, SC, EMAG will feature manufacturing systems for precision metal components with the VL 2 modular vertical turning machine for the low-cost production of chucked components with a diameter of up to 100 mm. This machine from the VL series will be on display for visitors to experience the successful EMAG modular inverted...

Read More »
Visit EMAG at Westec 2017 Booth 2025!
Machinery & Machining Tools

Visit EMAG at Westec 2017 Booth 2025!

At Westec 2017, September 12-14 at the Los Angeles Convention Center, EMAG will feature manufacturing systems for precision metal components with the modular VL 2 vertical-pick up turning machine for the efficient machining of components up to 100 mm in diameter. The VL series will be on display for visitors to experience the successful EMAG modular inverted vertical lathe design. With the aim to...

Read More »
EMAG at CMTS 2017, Booth 2418!
Machinery & Machining Tools

EMAG at CMTS 2017, Booth 2418!

At CMTS 2017, September 25-28 at the International Centre in Mississauga, ON - EMAG L.L.C. will feature a variety of our manufacturing systems for precision metal components. The modular VL Series for chucked components will be on display, with our VL 4 machine, for visitors to experience the successful EMAG modular inverted vertical lathe design. With the goal to develop a system of modular...

Read More »
Gear Manufacturing with Standardized Components from the Modular Solutions Line
Laboratory and Research Supplies and Equipment

Gear Manufacturing with Standardized Components from the Modular Solutions Line

"We have separated the machining process for gears into four easily manageable sub-processes", says Peter Loetzner, President & CEO at EMAG L.L.C. - In OP 10 and OP 20, we use the VL 3 DUO dual-spindle vertical turning center to machine both sides of the gear blanks. In OP 30, we do the gear hobbing on our VL 4 H gear hobbing machine. The final chamfering and deburring of the finished gear in OP...

Read More »
Multi-Process Module by EMAG ECM: Electro-Chemical Efficiency Lifts Automotive Mass Production to a New Level
Controls & Controllers

Multi-Process Module by EMAG ECM: Electro-Chemical Efficiency Lifts Automotive Mass Production to a New Level

The idea behind the "platform strategy" in automotive production is as simple as it is effective: The manufacturers no longer construct completely unique engines, transmissions, and components for every model, but instead use numerous "common components" for similar vehicles. This results in a massive increase in unit volumes, and a decrease in the development and unit costs. However, the...

Read More »
EASTEC 2017, Booth 1748: EMAG Presents World-Class Machining Quality in return to EASTEC

EASTEC 2017, Booth 1748: EMAG Presents World-Class Machining Quality in return to EASTEC

At EASTEC 2017, May 16 - 18 at the Eastern States Exposition in West Springfield, MA, EMAG will feature manufacturing systems for precision metal components live with its VL 4 Vertical Turning Machine. The VL series will be on display for visitors to experience the successful EMAG modular inverted vertical lathe design. With the aim to develop a system of modular machines ideal for use in the...

Read More »
VL 3 DUO Track Motion Automation System offers twelve tool positions.
Controls & Controllers

VL 3 DUO Track Motion Automation System offers twelve tool positions.

Needing just 13 m to install complete VL 3 DUO, VL 3 DUO TrackMotion automation system offers up to 150 mm dimensions for complete manufacturing system for chucked parts. With rating of up to 18.1 kW, unit features torque of up to 142 Nm. Featuring two Machining areas, unit has its own parts buffer. When combined with VL 4 H, modular gear hobbing machine and VLC 100 CC or VLC 100 RC, device...

Read More »
Vertical Modular Turning Machines - Low Unit Costs Guaranteed!
Communication Systems & Equipment

Vertical Modular Turning Machines - Low Unit Costs Guaranteed!

Vertical production machines are EMAG's territory. It all began with the VSC series, which laid the foundation for the successful machine concept of the vertical pick-up turning center. This machine concept runs through nearly the entire product range of the manufacturer, and it takes on its latest form in the VL series. VL machines are part of EMAG's modular standard series. As the term...

Read More »
Turning / Milling Centers for Complex Chucked Parts
Communication Systems & Equipment

Turning / Milling Centers for Complex Chucked Parts

The machines in the VMC MT series are ideal production systems for chucked parts with complex geometries. Whether they are used for prototype production or for fast changes in small production runs, the VMC MT series from EMAG is ideally designed to meet the demands of flexible production situations thanks to the ergonomic accessibility of the machining area and the bottom-mounted workpiece...

Read More »
Visit EMAG at Gear Expo 2017 in Booth 1107!
Machinery & Machining Tools

Visit EMAG at Gear Expo 2017 in Booth 1107!

At Gear Expo 2017, October 24-26 at Greater Columbus Convention Center in Columbus, OH EMAG USA will feature manufacturing systems for precision metal components with a special focus on its efficient and diverse solutions for gear manufacturing. The modular VL Series for chucked components will be on display, with our VL 4 machine, for visitors to experience the successful EMAG modular inverted...

Read More »
Visit EMAG at South-Tec 2017 in Booth 1629!
Machinery & Machining Tools

Visit EMAG at South-Tec 2017 in Booth 1629!

At South-Tec 2017, October 24-26 at the TD Exposition Center in Greenville, SC, EMAG will feature manufacturing systems for precision metal components with the VL 2 modular vertical turning machine for the low-cost production of chucked components with a diameter of up to 100 mm. This machine from the VL series will be on display for visitors to experience the successful EMAG modular inverted...

Read More »
Visit EMAG at Westec 2017 Booth 2025!
Machinery & Machining Tools

Visit EMAG at Westec 2017 Booth 2025!

At Westec 2017, September 12-14 at the Los Angeles Convention Center, EMAG will feature manufacturing systems for precision metal components with the modular VL 2 vertical-pick up turning machine for the efficient machining of components up to 100 mm in diameter. The VL series will be on display for visitors to experience the successful EMAG modular inverted vertical lathe design. With the aim to...

Read More »
EMAG at CMTS 2017, Booth 2418!
Machinery & Machining Tools

EMAG at CMTS 2017, Booth 2418!

At CMTS 2017, September 25-28 at the International Centre in Mississauga, ON - EMAG L.L.C. will feature a variety of our manufacturing systems for precision metal components. The modular VL Series for chucked components will be on display, with our VL 4 machine, for visitors to experience the successful EMAG modular inverted vertical lathe design. With the goal to develop a system of modular...

Read More »
Gear Manufacturing with Standardized Components from the Modular Solutions Line
Laboratory and Research Supplies and Equipment

Gear Manufacturing with Standardized Components from the Modular Solutions Line

"We have separated the machining process for gears into four easily manageable sub-processes", says Peter Loetzner, President & CEO at EMAG L.L.C. - In OP 10 and OP 20, we use the VL 3 DUO dual-spindle vertical turning center to machine both sides of the gear blanks. In OP 30, we do the gear hobbing on our VL 4 H gear hobbing machine. The final chamfering and deburring of the finished gear in OP...

Read More »
Multi-Process Module by EMAG ECM: Electro-Chemical Efficiency Lifts Automotive Mass Production to a New Level
Controls & Controllers

Multi-Process Module by EMAG ECM: Electro-Chemical Efficiency Lifts Automotive Mass Production to a New Level

The idea behind the "platform strategy" in automotive production is as simple as it is effective: The manufacturers no longer construct completely unique engines, transmissions, and components for every model, but instead use numerous "common components" for similar vehicles. This results in a massive increase in unit volumes, and a decrease in the development and unit costs. However, the...

Read More »
EASTEC 2017, Booth 1748: EMAG Presents World-Class Machining Quality in return to EASTEC

EASTEC 2017, Booth 1748: EMAG Presents World-Class Machining Quality in return to EASTEC

At EASTEC 2017, May 16 - 18 at the Eastern States Exposition in West Springfield, MA, EMAG will feature manufacturing systems for precision metal components live with its VL 4 Vertical Turning Machine. The VL series will be on display for visitors to experience the successful EMAG modular inverted vertical lathe design. With the aim to develop a system of modular machines ideal for use in the...

Read More »
VL 3 DUO Track Motion Automation System offers twelve tool positions.
Controls & Controllers

VL 3 DUO Track Motion Automation System offers twelve tool positions.

Needing just 13 m to install complete VL 3 DUO, VL 3 DUO TrackMotion automation system offers up to 150 mm dimensions for complete manufacturing system for chucked parts. With rating of up to 18.1 kW, unit features torque of up to 142 Nm. Featuring two Machining areas, unit has its own parts buffer. When combined with VL 4 H, modular gear hobbing machine and VLC 100 CC or VLC 100 RC, device...

Read More »
Company News

EMAG ECM - Efficiency in Aero Machining

In only a few other branches of industry are development pressures as enormous as in aircraft construction. One of the reasons is the fact that legislation is getting ever stricter about the CO2 emission of aircraft's at the same time as market expectations are of a rapidly accelerating growth in the sector. It is as a consequence of this development that aero engines are becoming a focal...

Read More »
Vertical Modular Turning Machines - Low Unit Costs Guaranteed!
Communication Systems & Equipment

Vertical Modular Turning Machines - Low Unit Costs Guaranteed!

Vertical production machines are EMAG's territory. It all began with the VSC series, which laid the foundation for the successful machine concept of the vertical pick-up turning center. This machine concept runs through nearly the entire product range of the manufacturer, and it takes on its latest form in the VL series. VL machines are part of EMAG's modular standard series. As the term...

Read More »

All Topics