Regal Components, Inc.

Ejector Pins are through-hardened to Rc 60-63.
Electronic Components & Devices

Ejector Pins are through-hardened to Rc 60-63.

Featuring heads that are finished and chamfered for proper seating and annealed to facilitate machining, Regal Thru-Tuff(TM) M-2 HSS Ejector Pins are stocked in 6, 8, and 10 in. lengths in fractional (TT type) diameters, and .0005, .001, .002, and .005 in. standard oversize (TTO type) diameters. Available in straight/shoulder styles, they are suitable for molding nylon and other parts with high...

Read More »
Ejector Sleeves are optimized for heat- and wear-resistance.
Architectural & Civil Engineering Products

Ejector Sleeves are optimized for heat- and wear-resistance.

Regal ESL H-13 Nitrided Ejector Sleeves, machined from H-13 hotwork die steel, are nitrided on ID and OD surfaces to Rc 65-74 for optimal wear resistance. Offered in 109 standard sizes with IDs from 3/32-Â-¾ in. and lengths from 3-12 in. in 1 in. increments, sleeves can also be produced as specials down to 1/16 in. ID, with varying wall thick-nesses, ID/OD combinations, and lengths to 25 in....

Read More »
Pins and Punches match specific customer requirements.
Electronic Components & Devices

Pins and Punches match specific customer requirements.

Custom Precision Pins and Punches can be manufactured from various grades of tool steels such as M-2, A-2, A-10, H-13, S-7, PM-M4, PM-10V, and PM-15V for toughness and wear resistance, 420SS and 440SS SS for corrosion resistance, and Moldstar(TM) copper alloys for heat transfer values. Available with tip diameters as small as 0.002 in. and lengths up to 14 in., they can be held to within 0.000050...

Read More »
Custom Pins and Punches Matched to Application Requirements
Electronic Components & Devices

Custom Pins and Punches Matched to Application Requirements

Custom designed pins and punches manufactured from various grades of tool steels, stainless, and copper alloys to match specific customer require-ments are being introduced by Regal Components, Inc. of Clearwater, Florida. Regal Custom Precision Pins and Punches can be manufactured from various grades of tool steels such as M-2, A-2, A-10, H-13, S-7, PM-M4, PM-10V, PM-15V to optimize toughness...

Read More »
Ejector Pins suit molding with high glass content resins.
Electronic Components & Devices

Ejector Pins suit molding with high glass content resins.

Hardened-through to Rc 60-63 with annealed heads, Regal TT Type Thru-Tuff(TM) M-2 High Speed Steel Ejector Pins are available in inch-fractional sizes and oversize diameters in straight and shoulder styles. Units are hot forged and stress relieved for uniform grain flow. They are precision ground to 4-10 rms surface finish and .0003 in. tolerance. Sizes range from 1/32-3/8 in. in 6, 8, and 10 in....

Read More »
Ejector Blades come in range of standard inch sizes.
Electronic Components & Devices

Ejector Blades come in range of standard inch sizes.

Machined from H-13 hotwork die steel with 50-54 Rc blade hardness and annealed heads, US Standard Inch Ejector Blades range from .024-.078 in. thick and .100-.484 in. in width with tolerance of +.0000-.0003 in. Units come in 8 standard overall lengths from 5-10 3/8 in. Custom blades in variety of tool steels with corner radii, vents, head flats, and EDM shapes can also be provided.

Read More »
Company News

Die and Mold Components Catalog Highlights Three Types of Ejector Pins

A new 24-page catalog and price list that features ejector pins, core pins, ejector blades, ejector sleeves, die ejector pins, bevel head pins, and specials is being offered by Regal Components, Inc. of Clearwater, Florida. The Regal Catalog 906 includes product details and pricing for a wide range of popular die and mold components and features three different series of ejector pins: the...

Read More »
Ejector Pins are through-hardened to Rc 60-63.
Electronic Components & Devices

Ejector Pins are through-hardened to Rc 60-63.

Featuring heads that are finished and chamfered for proper seating and annealed to facilitate machining, Regal Thru-Tuff(TM) M-2 HSS Ejector Pins are stocked in 6, 8, and 10 in. lengths in fractional (TT type) diameters, and .0005, .001, .002, and .005 in. standard oversize (TTO type) diameters. Available in straight/shoulder styles, they are suitable for molding nylon and other parts with high...

Read More »
Company News

Mold and Die Components Website Features In-Stock Items

An upgraded Web site featuring a complete line of standard specialty mold and die components that are available off-the-shelf has been launched by Regal Components of Clearwater, Florida. Regalcomps.com provides a full range of specialty mold and die components including straight- and shoulder-type ejector pins in M-2 and H-13, inch and metric, through-hardened and nitrided; and ejector sleeves,...

Read More »
Ejector Sleeves are optimized for heat- and wear-resistance.
Architectural & Civil Engineering Products

Ejector Sleeves are optimized for heat- and wear-resistance.

Regal ESL H-13 Nitrided Ejector Sleeves, machined from H-13 hotwork die steel, are nitrided on ID and OD surfaces to Rc 65-74 for optimal wear resistance. Offered in 109 standard sizes with IDs from 3/32-Â-¾ in. and lengths from 3-12 in. in 1 in. increments, sleeves can also be produced as specials down to 1/16 in. ID, with varying wall thick-nesses, ID/OD combinations, and lengths to 25 in....

Read More »
Pins and Punches match specific customer requirements.
Electronic Components & Devices

Pins and Punches match specific customer requirements.

Custom Precision Pins and Punches can be manufactured from various grades of tool steels such as M-2, A-2, A-10, H-13, S-7, PM-M4, PM-10V, and PM-15V for toughness and wear resistance, 420SS and 440SS SS for corrosion resistance, and Moldstar(TM) copper alloys for heat transfer values. Available with tip diameters as small as 0.002 in. and lengths up to 14 in., they can be held to within 0.000050...

Read More »
Custom Pins and Punches Matched to Application Requirements
Electronic Components & Devices

Custom Pins and Punches Matched to Application Requirements

Custom designed pins and punches manufactured from various grades of tool steels, stainless, and copper alloys to match specific customer require-ments are being introduced by Regal Components, Inc. of Clearwater, Florida. Regal Custom Precision Pins and Punches can be manufactured from various grades of tool steels such as M-2, A-2, A-10, H-13, S-7, PM-M4, PM-10V, PM-15V to optimize toughness...

Read More »
Ejector Pins suit molding with high glass content resins.
Electronic Components & Devices

Ejector Pins suit molding with high glass content resins.

Hardened-through to Rc 60-63 with annealed heads, Regal TT Type Thru-Tuff(TM) M-2 High Speed Steel Ejector Pins are available in inch-fractional sizes and oversize diameters in straight and shoulder styles. Units are hot forged and stress relieved for uniform grain flow. They are precision ground to 4-10 rms surface finish and .0003 in. tolerance. Sizes range from 1/32-3/8 in. in 6, 8, and 10 in....

Read More »
Ejector Blades come in range of standard inch sizes.
Electronic Components & Devices

Ejector Blades come in range of standard inch sizes.

Machined from H-13 hotwork die steel with 50-54 Rc blade hardness and annealed heads, US Standard Inch Ejector Blades range from .024-.078 in. thick and .100-.484 in. in width with tolerance of +.0000-.0003 in. Units come in 8 standard overall lengths from 5-10 3/8 in. Custom blades in variety of tool steels with corner radii, vents, head flats, and EDM shapes can also be provided.

Read More »

All Topics