Pacific Power Source
Irvine, CA 92614
AC Power Sources feature high power density design.
Comprising 2 models with 1,000 and 1,500 VA power levels, ADX Series requires just 2U of rack space for automated test equipment applications. Units feature active power corrected AC inputs with universal input voltage range so they can be deployed anywhere. Voltage, frequency, and current limit are all programmable and total of 99 non-volatile setups can be stored. Other features include...
Read More »
AC Power Test Option assesses MIL-STD-1399-300 compliance.
Available as integrated option package running within Pacific Power Source UPC Studio Windows control program, MIL-STD-1399-300B option is designed to test AC products for compliance with Department of Defense Interface Standard Mil-Std-1399-300 (Aircraft Electric Power Characteristics). Option includes latest revision B test sequences for all AC power groups and automatically generates detailed...
Read More »
Programmable AC Power Sources satisfy lower load requirements.
Respectively carrying 1,000 and 1,500 VA ratings, 110ACX and l15ACX feature same feature set and 2U, rack-mount design. Universal AC input front-end offers protection against line anomalies while promoting energy efficiency. In addition to measurement resolution and stability with support for smaller AC loads, features include 15–1,200 Hz frequency range, dual 150 and 300 Vac RMS voltage...
Read More »Avionics Compliance Testing Software covers Mil-Std-704, DO-160.
UPC Studio Windows-® control program supports- routines designed to test DC products for compliance with DoD Interface Standard Mil-Std-704 and RTCA standard DO-160, Section 16 for commercial aircraft power test. These internally run option packages include revision test sequences for both AC and DC power groups. Detailed test reports in Rich Text Format are generated automatically at end of...
Read More »
DC Output Add-On enhances AC power sources' capabilities.
Used to augment Pacific Power Source programmable AC power sources, DCR600-20 adds DC output voltage programming up to 600 Vdc and with up to 20 Adc of output current per unit. AMX Series linear AC power source have bandwidth lack of bulk capacitance on output, which makes them capable of supporting voltage slew rates required for avionics compliance test standards – Mil-Std 704, RTCA/DO160...
Read More »AC Quality Testing Software addresses Boeing 787B3-0147.
Running inside Pacific Power Source UPC Studio control program, 787B3-0147 option provides suite of test routines designed to test AC Power Quality as it applies to Boeing 787 Dreamliner. Integrated option package is based on Boeing document 787B3-0147,- 787 Electrical Power Quality and Design Requirements, and- includes revision C test sequences for all AC power groups. Detailed test reports...
Read More »AC Test Software ensures compliance for defense avionics.
Available as integrated option inside UPC Studio Windows control program, MIL-STD-704F option tests AC products for compliance with Department of Defense Interface Standard Mil-Std-704, Aircraft Electric Power Characteristics. Option includes latest revision F test sequences for all AC power groups, including single- and 3-phase, fixed 400 Hz frequency as well as single- and 3-phase, variable...
Read More »UPC Test Manager Control Software offers avionics test option.
Available as integrated package running inside UPC Studio Test Manager Control program, RTCA/DO160G option offers suite of test routines designed to test AC products for compliance with Section 16 of RTCA/DO160 revision G, Environmental Conditions and Test Procedures for Airborne Equipment. Power groups include single- and 3-phase, fixed 400 Hz frequency as well as single- and 3-phase, variable...
Read More »
Linear AC Power Sources provide 500 VA to 12 kVA.
Low distortion AMX Series produces single-phase, split-phase, or 3-phase power. Select models may be connected in parallel to provide up to 30 kVA. Units combine broad, 50 kHz small-signal bandwidth with peak to RMS current ratio of 4-6:1. They feature continuous self-calibration and programmable output impedance. AMX Series can be configured with manual or programmable controllers.
Read More »
AC Power Sources available in single and three phase.
ASX series switch-mode power sources use high-frequency pulse-width modulation for power conversions, producing outputs of 1500 VA to 6000 VA. They are available with manual controllers that adjust voltage and frequency from front panel. Programmable controllers can be used to simulate power conditions for equipment under test (EUT), capture and characterize output of those simulations, and...
Read More »AC Power Sources feature high power density design.
Comprising 2 models with 1,000 and 1,500 VA power levels, ADX Series requires just 2U of rack space for automated test equipment applications. Units feature active power corrected AC inputs with universal input voltage range so they can be deployed anywhere. Voltage, frequency, and current limit are all programmable and total of 99 non-volatile setups can be stored. Other features include...
Read More »
AC Power Test Option assesses MIL-STD-1399-300 compliance.
Available as integrated option package running within Pacific Power Source UPC Studio Windows control program, MIL-STD-1399-300B option is designed to test AC products for compliance with Department of Defense Interface Standard Mil-Std-1399-300 (Aircraft Electric Power Characteristics). Option includes latest revision B test sequences for all AC power groups and automatically generates detailed...
Read More »
Programmable AC Power Sources satisfy lower load requirements.
Respectively carrying 1,000 and 1,500 VA ratings, 110ACX and l15ACX feature same feature set and 2U, rack-mount design. Universal AC input front-end offers protection against line anomalies while promoting energy efficiency. In addition to measurement resolution and stability with support for smaller AC loads, features include 15–1,200 Hz frequency range, dual 150 and 300 Vac RMS voltage...
Read More »Avionics Compliance Testing Software covers Mil-Std-704, DO-160.
UPC Studio Windows-® control program supports- routines designed to test DC products for compliance with DoD Interface Standard Mil-Std-704 and RTCA standard DO-160, Section 16 for commercial aircraft power test. These internally run option packages include revision test sequences for both AC and DC power groups. Detailed test reports in Rich Text Format are generated automatically at end of...
Read More »
DC Output Add-On enhances AC power sources' capabilities.
Used to augment Pacific Power Source programmable AC power sources, DCR600-20 adds DC output voltage programming up to 600 Vdc and with up to 20 Adc of output current per unit. AMX Series linear AC power source have bandwidth lack of bulk capacitance on output, which makes them capable of supporting voltage slew rates required for avionics compliance test standards – Mil-Std 704, RTCA/DO160...
Read More »AC Quality Testing Software addresses Boeing 787B3-0147.
Running inside Pacific Power Source UPC Studio control program, 787B3-0147 option provides suite of test routines designed to test AC Power Quality as it applies to Boeing 787 Dreamliner. Integrated option package is based on Boeing document 787B3-0147,- 787 Electrical Power Quality and Design Requirements, and- includes revision C test sequences for all AC power groups. Detailed test reports...
Read More »AC Test Software ensures compliance for defense avionics.
Available as integrated option inside UPC Studio Windows control program, MIL-STD-704F option tests AC products for compliance with Department of Defense Interface Standard Mil-Std-704, Aircraft Electric Power Characteristics. Option includes latest revision F test sequences for all AC power groups, including single- and 3-phase, fixed 400 Hz frequency as well as single- and 3-phase, variable...
Read More »UPC Test Manager Control Software offers avionics test option.
Available as integrated package running inside UPC Studio Test Manager Control program, RTCA/DO160G option offers suite of test routines designed to test AC products for compliance with Section 16 of RTCA/DO160 revision G, Environmental Conditions and Test Procedures for Airborne Equipment. Power groups include single- and 3-phase, fixed 400 Hz frequency as well as single- and 3-phase, variable...
Read More »
Linear AC Power Sources provide 500 VA to 12 kVA.
Low distortion AMX Series produces single-phase, split-phase, or 3-phase power. Select models may be connected in parallel to provide up to 30 kVA. Units combine broad, 50 kHz small-signal bandwidth with peak to RMS current ratio of 4-6:1. They feature continuous self-calibration and programmable output impedance. AMX Series can be configured with manual or programmable controllers.
Read More »
AC Power Sources available in single and three phase.
ASX series switch-mode power sources use high-frequency pulse-width modulation for power conversions, producing outputs of 1500 VA to 6000 VA. They are available with manual controllers that adjust voltage and frequency from front panel. Programmable controllers can be used to simulate power conditions for equipment under test (EUT), capture and characterize output of those simulations, and...
Read More »