Caddock Electronics, Inc.
Riverside, CA 92507
Share:
Film Resistors suit analog electronics applications.
Manufactured with alumina ceramic sandwich, Models USF340, USF370, and USF371 provide voltage ratings of 300, 1,400, and 2,500 V and power ratings of 0.33, 0.75, and 0.75 W, respectively. Units feature resistance range of 50 ohms to 25 Megohms with temperature coefficient of -
Read More »
Film Resistors remain stable in extreme conditions.
Designed for use in voltage measurement circuits, Type VMR Transient Tolerant Voltage Monitoring Resistors maintain stability when exposed to overloads, impulses, and extreme environmental conditions. They are manufactured with Tetrinox-® resistance film system and feature ceramic sandwich construction. Able to handle transient voltage to 15 kV peak, products have non-inductive designs with...
Read More »
Decade Voltage Dividers offer voltage ratings of 1,200 V.
Compact Series 1776-C67 and 1776-C68 are for 3-½-, 4-½-, and 5-½-digit handheld and benchtop multimeters, power-quality meters, and other devices where precision voltage is required. Featuring Tetrinox-® Film System, dividers offer load life stability of 2,000 hr at full rated voltage at 85-
Read More »
High-Voltage Dividers offer ratios of 100:1 and 1000:1.
Type HVD High Voltage Divider Networks are offered in 3 models with max voltage ratings of 1,500, 2,500, and 5,000 Vdc. Ratio tolerance is -±0.05%, and ratio temperature coefficient is -±5 ppm/-°C max from -40 to +85-°C. Alumina-ceramic sandwich construction offers thermal conductivity. It directs heat flow away from resistor element, minimizing temperature rise in resistor due to power...
Read More »
Film Resistors provide stable operating performance.
Type USF ultra-stable, low TC, ultra-precision film resistors for precision analog electronics are available in three models. USF240 features ratings of 300 V and 0.33 W, USF270 features ratings of 1,400 V and 0.75 W, and USF271 features ratings of 2,500 V and 0.75 W. Alumina ceramic sandwich provides heat flow away from resistor element, minimizing temperature rise in resistor due to power...
Read More »
High Voltage Resistors come in 5, 10, and 15 kV sizes.
Type USG resistors offer temperature coefficient of 10 ppm/-
Read More »
Power/Snubber Resistors suit power electronics circuits.
Non-inductive, heat sink mountable designs, suitable for high power density designs, allows TO-Style resistors to operate up to 500 MHz in 25 to 100 ohm range. Power ratings range from 25 W (TO-126) to 100 W (TO-247), at +25-
Read More »
Precision Chip Resistor suits SMT reflow solder processes.
Rated at 150 V, Model CHR2520FC flip-chip style chip resistor is available in 8 standard values from 10 to 100 Meg with 1% tolerance. Temperature Coefficient is -
Read More »
Radial Resistors are available from 1 Ohm to 100 Meg.
Type MK132V/MK632V non-inductive film resistors come in CK06 style package with ratings of 400V, 0.75 W at 125 deg C. Tolerance of 1% is standard and TC is 50 ppm/-
Read More »
Film Resistors suit analog electronics applications.
Manufactured with alumina ceramic sandwich, Models USF340, USF370, and USF371 provide voltage ratings of 300, 1,400, and 2,500 V and power ratings of 0.33, 0.75, and 0.75 W, respectively. Units feature resistance range of 50 ohms to 25 Megohms with temperature coefficient of -
Read More »
Film Resistors remain stable in extreme conditions.
Designed for use in voltage measurement circuits, Type VMR Transient Tolerant Voltage Monitoring Resistors maintain stability when exposed to overloads, impulses, and extreme environmental conditions. They are manufactured with Tetrinox-® resistance film system and feature ceramic sandwich construction. Able to handle transient voltage to 15 kV peak, products have non-inductive designs with...
Read More »
Decade Voltage Dividers offer voltage ratings of 1,200 V.
Compact Series 1776-C67 and 1776-C68 are for 3-½-, 4-½-, and 5-½-digit handheld and benchtop multimeters, power-quality meters, and other devices where precision voltage is required. Featuring Tetrinox-® Film System, dividers offer load life stability of 2,000 hr at full rated voltage at 85-
Read More »
High-Voltage Dividers offer ratios of 100:1 and 1000:1.
Type HVD High Voltage Divider Networks are offered in 3 models with max voltage ratings of 1,500, 2,500, and 5,000 Vdc. Ratio tolerance is -±0.05%, and ratio temperature coefficient is -±5 ppm/-°C max from -40 to +85-°C. Alumina-ceramic sandwich construction offers thermal conductivity. It directs heat flow away from resistor element, minimizing temperature rise in resistor due to power...
Read More »
Film Resistors provide stable operating performance.
Type USF ultra-stable, low TC, ultra-precision film resistors for precision analog electronics are available in three models. USF240 features ratings of 300 V and 0.33 W, USF270 features ratings of 1,400 V and 0.75 W, and USF271 features ratings of 2,500 V and 0.75 W. Alumina ceramic sandwich provides heat flow away from resistor element, minimizing temperature rise in resistor due to power...
Read More »
High Voltage Resistors come in 5, 10, and 15 kV sizes.
Type USG resistors offer temperature coefficient of 10 ppm/-
Read More »
Power/Snubber Resistors suit power electronics circuits.
Non-inductive, heat sink mountable designs, suitable for high power density designs, allows TO-Style resistors to operate up to 500 MHz in 25 to 100 ohm range. Power ratings range from 25 W (TO-126) to 100 W (TO-247), at +25-
Read More »
Precision Chip Resistor suits SMT reflow solder processes.
Rated at 150 V, Model CHR2520FC flip-chip style chip resistor is available in 8 standard values from 10 to 100 Meg with 1% tolerance. Temperature Coefficient is -
Read More »
Radial Resistors are available from 1 Ohm to 100 Meg.
Type MK132V/MK632V non-inductive film resistors come in CK06 style package with ratings of 400V, 0.75 W at 125 deg C. Tolerance of 1% is standard and TC is 50 ppm/-
Read More »