Fluid Components International
San Marcos, CA 92069
Share:
FS10A Flow Switch/Monitor Receives Zone 2 ATEX, IECEx Approvals
Optimized for Continuous Flow Verification In Process Analyzer Sampling Systems San Marcos, CA --Engineers in search of a low-cost flow verification solution for process analyzer sampling systems that is suitable for hazardous plant environments will be pleased to learn that the advanced Model FS10A Flow Switch/Monitor from Fluid Components International (FCI) has received ATEX and IECEx...
Read More »
Flow Switch/Monitor suits Tube Tee or SP76 installations.
Used for continuously verifying flows within liquid or gas process analyzer sampling systems, FS10A Flow Switch has no moving parts and offers choice of electronic outputs. Electronics and thermal dispersion flow sensing technology lend to sampling system flow assurance, and design is free of cavities, orifices, or dead-legs that can trap fluids. Operating over 0.1-20 scfh air and 0.001-0.03 gpm...
Read More »FCI Flow and Liquid Level Interface Switch Receives SIL-2 Compliance Rating from TUV NORD
Ideal for Heavy Industrial Environment & Pump Protection San Marcos, CA-January 22, 2008-Built to comply with process industry precision requirements for flow, level and interface sensing in liquid, gas or foam, Fluid Components International's innovative FLT93 Switch Series is now rated Safety Integrity Level (SIL) 2 compliant. The SIL-2 compliance rating is designated in the failure analysis...
Read More »
Thermal Mass Flow Meters offer +1% accuracy.
Allowing measurement of line sizes from 2-24 in., ST50 Flow Meter Series includes thermal dispersion mass flow sensing technology that provides direct flow measurement. Also featuring built-in temperature compensation, units measure air flow from 1-125 sfps, nitrogen from 1-150 sfps, and compressed air from 4-400 sfps. In addition to wireless IR I/O, they also feature 4-20 mA and 0-10 Vdc dual...
Read More »
Coriolis Flow Meter is offered in 8 line sizes from 1/8-3 in.
With U tube sensor design featuring lightweight 316L SS tubes, Model CMB Coriolis Flow Meter offers Ã-
Read More »Russian Federation Approves FCI Flow Meters and Switches for Hazardous Use
Oil/Gas, Chemical, Electric Power, Pulp/Paper, Steel, Waste Water San Marcos, CA-September 13, 2006-Fluid Components International (FCI) has received full certification from the Russian Federation to import its rugged, precision mass flow meters and mass flow/level/temperature switches into the Russian Federation. FCI's manufacturing and calibration facilities have been inspected and approved for...
Read More »New FCI FLT93 Series FlexSwitch Brochure
Ideal for Plant Applications In Oil/Gas, Chemical, Food/Beverage, Pharmaceutical, Wastewater Treatment and More San Marcos, CA - Process and plant engineers in search of a reliable, precision flow/level/temperature switch for use in liquids, air, gases or for interface service will find the new FLT93Ã-® Series FlexSwitch(TM) Brochure from Fluid Components International (FCI) provides an...
Read More »
FS10A Flow Switch/Monitor Receives Zone 2 ATEX, IECEx Approvals
Optimized for Continuous Flow Verification In Process Analyzer Sampling Systems San Marcos, CA --Engineers in search of a low-cost flow verification solution for process analyzer sampling systems that is suitable for hazardous plant environments will be pleased to learn that the advanced Model FS10A Flow Switch/Monitor from Fluid Components International (FCI) has received ATEX and IECEx...
Read More »New FCI CD Catalog Provides Innovative Flow/Level Measurement & Application Solutions
Biogas, Chemical, Electric Power, Food/Beverage, Landfill, Mining, Oil/Gas, Pharmaceutical, Pulp/Paper, Water, Wastewater San Marcos, CA - February 25, 2011 - With helpful case studies, applications notes and best practices information, the new FCI Flow/Level Measurement Product and Services Catalog CD Release 11.5 provides a wide range of innovative instrument solutions that increase process...
Read More »
Flow Switch/Monitor suits Tube Tee or SP76 installations.
Used for continuously verifying flows within liquid or gas process analyzer sampling systems, FS10A Flow Switch has no moving parts and offers choice of electronic outputs. Electronics and thermal dispersion flow sensing technology lend to sampling system flow assurance, and design is free of cavities, orifices, or dead-legs that can trap fluids. Operating over 0.1-20 scfh air and 0.001-0.03 gpm...
Read More »FCI Flow and Liquid Level Interface Switch Receives SIL-2 Compliance Rating from TUV NORD
Ideal for Heavy Industrial Environment & Pump Protection San Marcos, CA-January 22, 2008-Built to comply with process industry precision requirements for flow, level and interface sensing in liquid, gas or foam, Fluid Components International's innovative FLT93 Switch Series is now rated Safety Integrity Level (SIL) 2 compliant. The SIL-2 compliance rating is designated in the failure analysis...
Read More »Fluid Components International Named 2007 Exporter of the Year
San Marcos, CA -November 15, 2007-The San Diego World Trade Center Association has named Fluid Components International their 2007 Exporter of the Year. The Exporter of the Year Award is presented to the company that has demonstrated the most significant growth in international markets and overcome major challenges to achieve that growth. FCI is a global leader in designing and manufacturing...
Read More »New FCI Best Practices Engineering Guide Provides Real World Installation Help
San Marcos, CA-November 8, 2007-Instrumentation, process control and plant engineers with challenging air or gas flow measurement applications will find the new Best Practices Engineering Guide, Installation Recommendations for FCI Single-Point, Thermal Dispersion Flow Meters from Fluid Components International provides succinct data addressing actual field conditions. The Best Practices...
Read More »
Thermal Mass Flow Meters offer +1% accuracy.
Allowing measurement of line sizes from 2-24 in., ST50 Flow Meter Series includes thermal dispersion mass flow sensing technology that provides direct flow measurement. Also featuring built-in temperature compensation, units measure air flow from 1-125 sfps, nitrogen from 1-150 sfps, and compressed air from 4-400 sfps. In addition to wireless IR I/O, they also feature 4-20 mA and 0-10 Vdc dual...
Read More »FCI Appoints Bopp & Reuther Messtechnik as Exclusive Distributor Firm in Germany
San Marcos, CA- March 28: Fluid Components International, a global leader in industrial process mass flow and level solutions, announces today a new distribution partnership with Bopp & Reuther Messtechnik GmbH in Germany. This expanded sales and support capability will help FCI meet the growing demand for industrial process flow meters and level instruments from the new firm's seven offices...
Read More »FCI Appoints Bopp & Reuther Messtechnik as Exclusive Distributor Firm in Germany
San Marcos, CA- March 28 , 2007-Fluid Components International, a global leader in industrial process mass flow and level solutions, announces today a new distribution partnership with Bopp & Reuther Messtechnik GmbH in Germany. This expanded sales and support capability will help FCI meet the growing demand for industrial process flow meters and level instruments from the new firm's seven...
Read More »