Fluid Components International

Detection Alarming Flow Switch/Monitor is SIL 2-compliant.
Communication Systems & Equipment

Detection Alarming Flow Switch/Monitor is SIL 2-compliant.

Constructed of all wetted parts manufactured with 316L stainless steel and Hastelloy C22 thermowells, insertion style FS10i is temperature-compensated and suited for use wherever detection and user warning of out-of-range or at no-flow conditions for air, gases, and water or other liquids is required. Flow trip point or alarm warning is produced within seconds, and sensitivity and setpoint range...

Read More »
Stop Pulling Meters for Calibration Verification with VeriCal System for FCI ST100 Air/Gas Flow Meter
Services

Stop Pulling Meters for Calibration Verification with VeriCal System for FCI ST100 Air/Gas Flow Meter

Ideal For Offshore Platforms Other Hard To Access Production Environments San Marcos, CA- – Oil/gas engineers responsible for performing routine flow meter calibration verifications who want to eliminate the hassle and cost of shutting down the line, pulling the meter, installing a spare and paying a lab fee will find the VeriCal™ In-Situ Calibration Verification System with the ST100 Series...

Read More »
Flow/Level/Temperature Switches comply with RoHS Directive.
Electrical Equipment & Systems

Flow/Level/Temperature Switches comply with RoHS Directive.

Housed in coated aluminum alloy enclosure- with high-density SMT electronics and quick disconnect terminal block, FLT93® Series FlexSwitch™ meets all EU restrictions on lead solder and 5 other toxic materials. Dual-function switches can be configured for flow or level sensing, flow and temperature sensing, or level and temperature sensing. Rated for ATEX locations and NEMA Type 4X...

Read More »
Electrical Equipment & Systems

FCI AS-FT Flow Transmitter For Mission-Critical Aircraft Monitoring Applications

The AS-FT Flow Transmitter from FCI Aerospace features a rugged, highly reliable thermal dispersion technology sensor design that is ideal for mission-critical air, gas and fluid monitoring systems on commercial and military aircraft. FCI Aerospace's AS-FT flow transmitters meet the demand for full qualification compliance with the performance and measurement capability necessary to serve a...

Read More »
Pressure Sensors are suited for aircraft liquid/gas monitoring.
Electrical Equipment & Systems

Pressure Sensors are suited for aircraft liquid/gas monitoring.

For mission-critical fuel, hydraulics, environmental control, coolant, and lubrication monitoring systems, AS-PT series includes models with thin film sputtered deposition strain-gage or variable capacitive ceramic sensing technologies. Leakproof transmitters measure pressure from 0–11,000 psia. Electronics with precision analog signal conditioning and ASIC circuitry for linearization combined...

Read More »
Boil Off Gas Flow Meter on LNG Tankers Helps Prevent Global Warming

Boil Off Gas Flow Meter on LNG Tankers Helps Prevent Global Warming

Supports International Maritime Organization (IMO) CO2 Limits San Marcos, CA- – LNG tanker operators in search of a next-generation air/gas flow meter to measure boil-off gas (BOG) accurately will find that the ST100 Series Thermal Mass Air/Gas Flow Meter from Fluid Components International (FCI) helps enable ship propulsion systems operate efficiently while complying with International...

Read More »
Froth Flotation Equipment Relies on FCI Flow Meters for Air/Gas Bubble Control to Separate Minerals

Froth Flotation Equipment Relies on FCI Flow Meters for Air/Gas Bubble Control to Separate Minerals

San Marcos, CA- – Mining engineers who need accurate air/gas flow measurement to control bubble production for froth flotation equipment to separate minerals will find the precision ST50 and ST100 Air/Gas Mass Flow Meters from Fluid Components International (FCI) provide high accuracy with virtually no maintenance. Froth flotation equipment separates minerals from pulverized ore slurries based...

Read More »
Air/Gas Mass Flow Meter features dual-element averaging.

Air/Gas Mass Flow Meter features dual-element averaging.

Suitable for pipes and ducts 12 in. and greater, Model ST102A averages input from 2 independent flow elements into single output. One flow element can be integral with flow transmitter, or both can be configured as remote for easy access to digital display/optical 4-button user interface. Insertion style meter measures flow from 0.25–1,000 SFPS with ±0.5% FS accuracy. On-board data logger with...

Read More »
Future-Ready ST100 Flow Meter Is SIL Compliant

Future-Ready ST100 Flow Meter Is SIL Compliant

San Marcos, CA — Process and plant engineers in search of a next-generation air/gas flow meter that is suitable for critical operations and hazardous environments will find that the future-ready ST100 Series Thermal Mass Air/Gas Flow Meter from Fluid Components International (FCI) is now rated for Safety Integrity Level (SIL) 1 compliant service.-  FCI's SIL compliance rating for the ST100...

Read More »
Detection Alarming Flow Switch/Monitor is SIL 2-compliant.
Communication Systems & Equipment

Detection Alarming Flow Switch/Monitor is SIL 2-compliant.

Constructed of all wetted parts manufactured with 316L stainless steel and Hastelloy C22 thermowells, insertion style FS10i is temperature-compensated and suited for use wherever detection and user warning of out-of-range or at no-flow conditions for air, gases, and water or other liquids is required. Flow trip point or alarm warning is produced within seconds, and sensitivity and setpoint range...

Read More »
Stop Pulling Meters for Calibration Verification with VeriCal System for FCI ST100 Air/Gas Flow Meter
Services

Stop Pulling Meters for Calibration Verification with VeriCal System for FCI ST100 Air/Gas Flow Meter

Ideal For Offshore Platforms Other Hard To Access Production Environments San Marcos, CA- – Oil/gas engineers responsible for performing routine flow meter calibration verifications who want to eliminate the hassle and cost of shutting down the line, pulling the meter, installing a spare and paying a lab fee will find the VeriCal™ In-Situ Calibration Verification System with the ST100 Series...

Read More »
Flow/Level/Temperature Switches comply with RoHS Directive.
Electrical Equipment & Systems

Flow/Level/Temperature Switches comply with RoHS Directive.

Housed in coated aluminum alloy enclosure- with high-density SMT electronics and quick disconnect terminal block, FLT93® Series FlexSwitch™ meets all EU restrictions on lead solder and 5 other toxic materials. Dual-function switches can be configured for flow or level sensing, flow and temperature sensing, or level and temperature sensing. Rated for ATEX locations and NEMA Type 4X...

Read More »
Electrical Equipment & Systems

FCI AS-FT Flow Transmitter For Mission-Critical Aircraft Monitoring Applications

The AS-FT Flow Transmitter from FCI Aerospace features a rugged, highly reliable thermal dispersion technology sensor design that is ideal for mission-critical air, gas and fluid monitoring systems on commercial and military aircraft. FCI Aerospace's AS-FT flow transmitters meet the demand for full qualification compliance with the performance and measurement capability necessary to serve a...

Read More »
Pressure Sensors are suited for aircraft liquid/gas monitoring.
Electrical Equipment & Systems

Pressure Sensors are suited for aircraft liquid/gas monitoring.

For mission-critical fuel, hydraulics, environmental control, coolant, and lubrication monitoring systems, AS-PT series includes models with thin film sputtered deposition strain-gage or variable capacitive ceramic sensing technologies. Leakproof transmitters measure pressure from 0–11,000 psia. Electronics with precision analog signal conditioning and ASIC circuitry for linearization combined...

Read More »
Boil Off Gas Flow Meter on LNG Tankers Helps Prevent Global Warming

Boil Off Gas Flow Meter on LNG Tankers Helps Prevent Global Warming

Supports International Maritime Organization (IMO) CO2 Limits San Marcos, CA- – LNG tanker operators in search of a next-generation air/gas flow meter to measure boil-off gas (BOG) accurately will find that the ST100 Series Thermal Mass Air/Gas Flow Meter from Fluid Components International (FCI) helps enable ship propulsion systems operate efficiently while complying with International...

Read More »
Froth Flotation Equipment Relies on FCI Flow Meters for Air/Gas Bubble Control to Separate Minerals

Froth Flotation Equipment Relies on FCI Flow Meters for Air/Gas Bubble Control to Separate Minerals

San Marcos, CA- – Mining engineers who need accurate air/gas flow measurement to control bubble production for froth flotation equipment to separate minerals will find the precision ST50 and ST100 Air/Gas Mass Flow Meters from Fluid Components International (FCI) provide high accuracy with virtually no maintenance. Froth flotation equipment separates minerals from pulverized ore slurries based...

Read More »
Air/Gas Mass Flow Meter features dual-element averaging.

Air/Gas Mass Flow Meter features dual-element averaging.

Suitable for pipes and ducts 12 in. and greater, Model ST102A averages input from 2 independent flow elements into single output. One flow element can be integral with flow transmitter, or both can be configured as remote for easy access to digital display/optical 4-button user interface. Insertion style meter measures flow from 0.25–1,000 SFPS with ±0.5% FS accuracy. On-board data logger with...

Read More »
Future-Ready ST100 Flow Meter Is SIL Compliant

Future-Ready ST100 Flow Meter Is SIL Compliant

San Marcos, CA — Process and plant engineers in search of a next-generation air/gas flow meter that is suitable for critical operations and hazardous environments will find that the future-ready ST100 Series Thermal Mass Air/Gas Flow Meter from Fluid Components International (FCI) is now rated for Safety Integrity Level (SIL) 1 compliant service.-  FCI's SIL compliance rating for the ST100...

Read More »

All Topics