Stackpole Electronics, Inc.
Suite 207
Raleigh, NC 27612
Power Resistors are RoHS compliant and lead free.
LC series SIP resistors are available with 4 to 13 pins and circuit types of bussed and isolated resistors in low profile SIP package. They offer power rating of 0.125 W per element, resistance values from 30-100 K, tolerances of 1 and 2%, and TCR of 100 ppm. Units are used in pull-up or pull-down resistor logic, bus terminations, and current limiters for LED strings, as well as for applications...
Read More »Metal Oxide Resistors operate up to 235-
Featuring flameproof coating, RS and RSM Series through-hole resistors range from Ã-½-5 W with resistance values from .1 W to 1 MW, and tolerances as low as 1%. Units are suitable for variety of applications, including automotive, drilling equipment, and welding equipment, as well as commercial and industrial kilns and ovens.
Read More »Chip Resistors have resistance values up to 10 GigW.
Available in standard tape and reel packaging on 7 in. reels, HVC series of high voltage chip resistors have absolute maximum voltage ratings by chip size. Size 2512 is rated up to 25 kV, 2010 is rated to 20 kV, 1206 is rated to 15 kV, 0805 is rated to 10 kV, and 0603 is rated to 5 kV. They maintain capability for .5% tolerance and 25 ppm TCR. Applications include high voltage power supplies,...
Read More »Axial Leaded Anti-Surge Resistors come in range of sizes.
Based on power metal film technology, RoHS-compliant ASR and SPR series provide alternative to carbon composition and ceramic composition resistors for pulse power withstanding with low inductance in all types of power supply applications. ASR series includes 1 W, mini Ã-½ W, mini Ã-¼ W, and Ã-¼ W body sizes. Capable of withstanding surges to 10 KV, SPR series - offered in 1 W and...
Read More »Stackpole Electronics, Inc. Announces the Expansion of the RNC Series Thin Film Precision Chip Resistors
RALEIGH, NC (June 26, 2007) - Stackpole Electronics, Inc. announces a significant expansion to their RNC series of precision nichrome thin film chip resistors. The most significant change is the expansion of the resistance value range for 0.01% tolerance and 5 and 10 ppm TCR's. This expansion makes the RNC series a practical, low cost solution for nearly all precision and semi-precision resistor...
Read More »Wirewound Resistor is noninductively wound conformal coated.
Designed for high speed and low inductance power applications, Series NWW has one winding in one direction and one in other direction, creating 2 resistors in parallel in each device. It is available in all standard wire wound (WW) sizes from .6-13 W. Product is RoHS compliant and offers standard tape and reel packaging in 250-2,500 pcs increments, depending on size.
Read More »SMD Resistor features heat sink to provide 600 V isolation.
Offered in standard tape and reel packaging, .5 x .5 in. HPC series SMD resistor is capable of 5 W continuous power in free air. With 200 or 400 lfm air movement, power rating increases to 10 and 12.5 W, respectively without exceeding circuit board temperature of 105Ã-
Read More »Stackpole Electronics, Inc. Announces 0201 Size Thin Film High Frequency Inductor
RALEIGH, NC (May 31, 2007) - Stackpole Electronics, Inc. announces the addition of an 0201 chip size for their AL series of thin film high frequency inductors. Thin film inductors are ideal for applications or designs requiring tight inductance tolerance, tightly controlled SRF, and excellent stability over temperature. The AL series now has chip sizes from 0201, 0402, and 0603 with wide...
Read More »SMD Chip Resistors can withstand surge.
Suited for I/O power/current limiting requirements, RPC series thick film SMD chip resistors have no calibration trim, facilitating pulse handling ability. With tolerances as low as 5%, they are available in sizes from 0805-2512 and in values from .27-22 m. Applications include switch mode power supplies, motor controls, as well as portable electronics such as metering and diagnostic equipment,...
Read More »Power Inductors feature nonshielded design.
Designed with 1.2 mm profile, MPE Series is available in values from 1-68 Ã-µH and handles currents up to 1.4 A. Low profile design makes inductors suited for handheld electronics applications such as PDAs, camcorders, and digital cameras. Available in 3 heights from 1.0-2.0 mm, MPI Series features enclosure suitable for environments up to 105Ã-
Read More »