Bonomi North America, Inc.

Bonomi S250 Series Stainless Steel In-Line Check Valves Earn NSF 61/372 Lead Free Certification
Fluid & Gas Flow Equipment

Bonomi S250 Series Stainless Steel In-Line Check Valves Earn NSF 61/372 Lead Free Certification

Bonomi’s S250 series stainless steel in-line check valves are now NSF 61/372-certified for potable water and other lead-free applications throughout the United States. They have been certified lead-free to NSF/ANSI 61 by the methods prescribed in NSF/ANSI 372. Charlotte, N.C. (PRWeb) November 21, 2019 -- Bonomi’s S250 series stainless steel in-line check valves are now NSF 61/372-certified...

Read More »
Latest Industrial Ball Valve and Limit Switch Packages Allow Remote Monitoring of Critical Manual Valve Applications
Electrical Equipment & Systems

Latest Industrial Ball Valve and Limit Switch Packages Allow Remote Monitoring of Critical Manual Valve Applications

Available in 600LL-LS2 (carbon steel) and 700LL-LS2 (stainless steel) models in sizes ranging from ¼ to 2 in. with investment cast 2-piece WCB or CF8M body. Features a pressure rating 2000 psi and 1000 psi or 150 psi steam for ¼ to 1 in. models and 1-1/4 to 2 in. models respectively. The LS2 limit switch is offered in a die-cast aluminum housing with BUNA-N O-ring that protects against...

Read More »
Bonomi North America Introduces Low-cost Bonomi EX Series with Both Mechanical and Non-contact Models
Electrical Equipment & Systems

Bonomi North America Introduces Low-cost Bonomi EX Series with Both Mechanical and Non-contact Models

LS2-B-EXM (mechanical model) employs two silver-plated mechanical contact switches and LS2-B-EXN (non-contact) includes two hermetically-sealed silver-plated snap-acting switches. Operating temperature range is -4°F to +176°F (-20°C to +80°C). UL listed for Class 1 & Class 2 hazardous locations and are available for three entries or metric threading.

Read More »
Bonomi's New EAX Series Actuators Offer a Wide Range of Torque Outputs
Mechanical Power Transmission

Bonomi's New EAX Series Actuators Offer a Wide Range of Torque Outputs

The CSA certified actuators are ISO 5211 compliant and are equipped with a mechanical visual position indicator. The explosion-proof, flame-proof and dust-proof actuators are approved for Class I, Division 1; Class I, Zone 1; and Class II, Division 1 locations. Include mechanical stops, two SPDT auxiliary switches, heater, thermostat and built-in thermal protection that prevent motor burnout.

Read More »
Latest SP Series Valve Positioner Comes with Automatic Self-Calibration Feature
Communication Systems & Equipment

Latest SP Series Valve Positioner Comes with Automatic Self-Calibration Feature

The Bonomi SP Series Valve Positioners are embedded with a microprocessor for positioning a pneumatic valve actuator for continuous valve control during monitoring and recording operating data. The product is offered in a NEMA 4X (IP66) enclosure for use in harsh industrial environments. It offers a continuous valve position control and comes with optional HART® communication and 4-20 mA input....

Read More »
Bonomis' New Series S250 In-line Check Valves Features Leak-free Service and Low-cracking .50-PSI Spring-loaded FKM Seat
Fluid & Gas Flow Equipment

Bonomis' New Series S250 In-line Check Valves Features Leak-free Service and Low-cracking .50-PSI Spring-loaded FKM Seat

Bonomi launches Series S250 Check Valves with a cold-formed 316 stainless steel body gives users the highest Cv at the lowest cost. The spring-loaded FKM seat provides high flow capacity, minimal head loss and bubble-tight protection against reverse flow. They are available in six sizes and FNPT threaded from 1/2” to 2”. The valves rate to 250 WOG with an operating temperature range of -4...

Read More »
New Flanged Full-Port Ball Valves Feature Factory-Installed Hidden-Spring Design Handles
Fluid & Gas Flow Equipment

New Flanged Full-Port Ball Valves Feature Factory-Installed Hidden-Spring Design Handles

Bonomi’s ANSI Class 150 Flanged Ball Valves are offered in 766000SRL (Stainless Steel) and 766001SRL (Carbon Steel) models in 1 to 3 in. sizes. The units come with a grounded stainless steel and blow-out proof stem, virgin PTFE seats, and Graphoil and PTFE seals. The valves feature 300 stainless steel hidden-spring design handles, fasteners, and nuts for use in harsh environments. The units are...

Read More »
V-Ball Automated Valves Feature a Blow-Out Proof Stainless Steel Stem
Fluid & Gas Flow Equipment

V-Ball Automated Valves Feature a Blow-Out Proof Stainless Steel Stem

Bonomi’s V-Ball Automated Valves are offered in ANSI Classes 150, 300 and 600 packages with carbon or stainless steel bodies. This unit provides ball port choices of 15°, 30°, 60° or 90° and 15/30°, 30/60° or 60/90° V-balls. Valves come with stainless steel stem with adjustable packing, stainless steel ball and P.T.F.E. seats, packing and thrust washer. Units are compliant to NACE MR...

Read More »
Bonomi S250 Series Stainless Steel In-Line Check Valves Earn NSF 61/372 Lead Free Certification
Fluid & Gas Flow Equipment

Bonomi S250 Series Stainless Steel In-Line Check Valves Earn NSF 61/372 Lead Free Certification

Bonomi’s S250 series stainless steel in-line check valves are now NSF 61/372-certified for potable water and other lead-free applications throughout the United States. They have been certified lead-free to NSF/ANSI 61 by the methods prescribed in NSF/ANSI 372. Charlotte, N.C. (PRWeb) November 21, 2019 -- Bonomi’s S250 series stainless steel in-line check valves are now NSF 61/372-certified...

Read More »
Latest Industrial Ball Valve and Limit Switch Packages Allow Remote Monitoring of Critical Manual Valve Applications
Electrical Equipment & Systems

Latest Industrial Ball Valve and Limit Switch Packages Allow Remote Monitoring of Critical Manual Valve Applications

Available in 600LL-LS2 (carbon steel) and 700LL-LS2 (stainless steel) models in sizes ranging from ¼ to 2 in. with investment cast 2-piece WCB or CF8M body. Features a pressure rating 2000 psi and 1000 psi or 150 psi steam for ¼ to 1 in. models and 1-1/4 to 2 in. models respectively. The LS2 limit switch is offered in a die-cast aluminum housing with BUNA-N O-ring that protects against...

Read More »
Bonomi North America Introduces Low-cost Bonomi EX Series with Both Mechanical and Non-contact Models
Electrical Equipment & Systems

Bonomi North America Introduces Low-cost Bonomi EX Series with Both Mechanical and Non-contact Models

LS2-B-EXM (mechanical model) employs two silver-plated mechanical contact switches and LS2-B-EXN (non-contact) includes two hermetically-sealed silver-plated snap-acting switches. Operating temperature range is -4°F to +176°F (-20°C to +80°C). UL listed for Class 1 & Class 2 hazardous locations and are available for three entries or metric threading.

Read More »
Bonomi's New EAX Series Actuators Offer a Wide Range of Torque Outputs
Mechanical Power Transmission

Bonomi's New EAX Series Actuators Offer a Wide Range of Torque Outputs

The CSA certified actuators are ISO 5211 compliant and are equipped with a mechanical visual position indicator. The explosion-proof, flame-proof and dust-proof actuators are approved for Class I, Division 1; Class I, Zone 1; and Class II, Division 1 locations. Include mechanical stops, two SPDT auxiliary switches, heater, thermostat and built-in thermal protection that prevent motor burnout.

Read More »
Latest SP Series Valve Positioner Comes with Automatic Self-Calibration Feature
Communication Systems & Equipment

Latest SP Series Valve Positioner Comes with Automatic Self-Calibration Feature

The Bonomi SP Series Valve Positioners are embedded with a microprocessor for positioning a pneumatic valve actuator for continuous valve control during monitoring and recording operating data. The product is offered in a NEMA 4X (IP66) enclosure for use in harsh industrial environments. It offers a continuous valve position control and comes with optional HART® communication and 4-20 mA input....

Read More »
Bonomis' New Series S250 In-line Check Valves Features Leak-free Service and Low-cracking .50-PSI Spring-loaded FKM Seat
Fluid & Gas Flow Equipment

Bonomis' New Series S250 In-line Check Valves Features Leak-free Service and Low-cracking .50-PSI Spring-loaded FKM Seat

Bonomi launches Series S250 Check Valves with a cold-formed 316 stainless steel body gives users the highest Cv at the lowest cost. The spring-loaded FKM seat provides high flow capacity, minimal head loss and bubble-tight protection against reverse flow. They are available in six sizes and FNPT threaded from 1/2” to 2”. The valves rate to 250 WOG with an operating temperature range of -4...

Read More »
New Flanged Full-Port Ball Valves Feature Factory-Installed Hidden-Spring Design Handles
Fluid & Gas Flow Equipment

New Flanged Full-Port Ball Valves Feature Factory-Installed Hidden-Spring Design Handles

Bonomi’s ANSI Class 150 Flanged Ball Valves are offered in 766000SRL (Stainless Steel) and 766001SRL (Carbon Steel) models in 1 to 3 in. sizes. The units come with a grounded stainless steel and blow-out proof stem, virgin PTFE seats, and Graphoil and PTFE seals. The valves feature 300 stainless steel hidden-spring design handles, fasteners, and nuts for use in harsh environments. The units are...

Read More »
V-Ball Automated Valves Feature a Blow-Out Proof Stainless Steel Stem
Fluid & Gas Flow Equipment

V-Ball Automated Valves Feature a Blow-Out Proof Stainless Steel Stem

Bonomi’s V-Ball Automated Valves are offered in ANSI Classes 150, 300 and 600 packages with carbon or stainless steel bodies. This unit provides ball port choices of 15°, 30°, 60° or 90° and 15/30°, 30/60° or 60/90° V-balls. Valves come with stainless steel stem with adjustable packing, stainless steel ball and P.T.F.E. seats, packing and thrust washer. Units are compliant to NACE MR...

Read More »

All Topics