Dieselcraft Fluid Engineering

Auburn, CA 95604

Dieselcraft Presents Microbe Test Kit for Identifying Fuel Problems
The Microbe Test Kit is used as a fuel test kit for biological contamination in less than 48 hrs. The test kit includes a dip slide that is offered in a plastic tube attached to the cap. The slide is dipped into the fuel and slide back into the cover tube. Within 24 to 48 hrs user can find the presence or absence of bacteria or mold in the fuel.
Read More »
Dieselcraft Presents Fuel Water Separator That Can Remove 99% of Visible Water
The Fuel Water Separator/ Fuel Purifier is available in 6 models for engines ranging from 200 HP to 2000 HP. The units are suitable for diesel powered generator sets, marine engines and fuel transfer, polishing and filtration applications. It features replaceable, changeable or cleanable filter elements and removes over 95% of natural contaminants found in the diesel fuel. The separator can be...
Read More »
Low Cost Fuel Test for Bacteria aka Algae in your fuel
Most diesel engine problems are related to fuel problems. Diesel fuel contamination problems have two different perspectives: biology and chemistry. Thinking you have a chemical problem when you have a biological problem and treating it with the wrong chemical will not solve your problem but may compound it. The approach of the chemical salesman “this will solve your problem” after you have...
Read More »
Centrifuge Oil Filtration for John Deere
Dieselcraft has developed the OC-20/JD Series Oil Centrifuge for the John Deere 4045 diesel gensets. The OC-20/JD Centrifuge removes 99% dirt and wear particles from the oil flow. Contaminant particles as low as 1 micron are removed by the OC-20, eliminating the wear and tear on close tolerance metal parts. The OC-20/JD Centrifuge removes dirt and wear particles from the oil flow all together....
Read More »
Water in Fuel Test Kit
This test will indicate the smallest amount of suspended water in diesel. Depending on the fuel blend and the amount of biodiesel you may see between 1000 PPM and 1500 PPM will be detected. Any detection of suspended water is not good if the detection powder turn 100% pink. The kit consists of 5 each 2 dram glass vials with the reaction powder capsule in them and one transfer pipette. The test...
Read More »
Water Test Kit comes with reaction powder capsule.
Water Test Kit consists of five 10 ml test tubes. Unit is equipped with transfer pipette. Product is suitable to detect the amount of biodiesel between 500 PPM and 1500 PPM.
Read More »
Diesel Fuel Filter has high-efficiency, solid-state design.
Model 5x32 removes 99.997% of visible water at flow rates up to 12 gpm and over 95% of large contaminates found in diesel fuel – all without use of replaceable, changeable, or cleanable filter elements. With no elements to clean and dispose of, this solid-state fuel purifier is suited for use by those who need to incorporate- fuel polishing systems on fuel storage tank and can be manufactured...
Read More »High Pressure Diesel Fuel Tank Cleaning System Model FPS-PW
There is no other tank cleaning system on the market that compares to Dieselcraft. This tank cleaning system is designed with a high pressure high flow pump and uses a tank cleaning spray nozzle that cleans 360-
Read More »
Model FPS-8 Diesel Fuel Tank Cleaning System
The Dieselcraft FPS-8 is a modular tank cleaning system designed for the transfer and/or re-circulating of diesel fuel in boats, generators and any other diesel vehicles with less than 500 gallon fuel tanks. The Dieselcraft FPS-8 removes over 99% of water and large contamination in fuel. The system utilizes an 8.3 gallon per minute, continuous duty gear pump in conjunction with a Dieselcraft...
Read More »
Dieselcraft Model 250 Oil Centrifuge on CAT 3520 Engine Running on Land Fill Gas
Quote from the customer: After analyzing the deposit formed in the Dieselcraft centrifuge placed on the number 1 engine at the customers, Utah facility, it can be determined that the composition of the gas has significant levels of sulfur and phosphorus oxides. These compounds, when introduced to water, can create acids in the engine oil leading to significant rust and premature wear problems....
Read More »
Dieselcraft Presents Microbe Test Kit for Identifying Fuel Problems
The Microbe Test Kit is used as a fuel test kit for biological contamination in less than 48 hrs. The test kit includes a dip slide that is offered in a plastic tube attached to the cap. The slide is dipped into the fuel and slide back into the cover tube. Within 24 to 48 hrs user can find the presence or absence of bacteria or mold in the fuel.
Read More »
Dieselcraft Presents Fuel Water Separator That Can Remove 99% of Visible Water
The Fuel Water Separator/ Fuel Purifier is available in 6 models for engines ranging from 200 HP to 2000 HP. The units are suitable for diesel powered generator sets, marine engines and fuel transfer, polishing and filtration applications. It features replaceable, changeable or cleanable filter elements and removes over 95% of natural contaminants found in the diesel fuel. The separator can be...
Read More »
Low Cost Fuel Test for Bacteria aka Algae in your fuel
Most diesel engine problems are related to fuel problems. Diesel fuel contamination problems have two different perspectives: biology and chemistry. Thinking you have a chemical problem when you have a biological problem and treating it with the wrong chemical will not solve your problem but may compound it. The approach of the chemical salesman “this will solve your problem” after you have...
Read More »
Centrifuge Oil Filtration for John Deere
Dieselcraft has developed the OC-20/JD Series Oil Centrifuge for the John Deere 4045 diesel gensets. The OC-20/JD Centrifuge removes 99% dirt and wear particles from the oil flow. Contaminant particles as low as 1 micron are removed by the OC-20, eliminating the wear and tear on close tolerance metal parts. The OC-20/JD Centrifuge removes dirt and wear particles from the oil flow all together....
Read More »
Water in Fuel Test Kit
This test will indicate the smallest amount of suspended water in diesel. Depending on the fuel blend and the amount of biodiesel you may see between 1000 PPM and 1500 PPM will be detected. Any detection of suspended water is not good if the detection powder turn 100% pink. The kit consists of 5 each 2 dram glass vials with the reaction powder capsule in them and one transfer pipette. The test...
Read More »
Water Test Kit comes with reaction powder capsule.
Water Test Kit consists of five 10 ml test tubes. Unit is equipped with transfer pipette. Product is suitable to detect the amount of biodiesel between 500 PPM and 1500 PPM.
Read More »
Diesel Fuel Filter has high-efficiency, solid-state design.
Model 5x32 removes 99.997% of visible water at flow rates up to 12 gpm and over 95% of large contaminates found in diesel fuel – all without use of replaceable, changeable, or cleanable filter elements. With no elements to clean and dispose of, this solid-state fuel purifier is suited for use by those who need to incorporate- fuel polishing systems on fuel storage tank and can be manufactured...
Read More »High Pressure Diesel Fuel Tank Cleaning System Model FPS-PW
There is no other tank cleaning system on the market that compares to Dieselcraft. This tank cleaning system is designed with a high pressure high flow pump and uses a tank cleaning spray nozzle that cleans 360-
Read More »
Model FPS-8 Diesel Fuel Tank Cleaning System
The Dieselcraft FPS-8 is a modular tank cleaning system designed for the transfer and/or re-circulating of diesel fuel in boats, generators and any other diesel vehicles with less than 500 gallon fuel tanks. The Dieselcraft FPS-8 removes over 99% of water and large contamination in fuel. The system utilizes an 8.3 gallon per minute, continuous duty gear pump in conjunction with a Dieselcraft...
Read More »
Dieselcraft Model 250 Oil Centrifuge on CAT 3520 Engine Running on Land Fill Gas
Quote from the customer: After analyzing the deposit formed in the Dieselcraft centrifuge placed on the number 1 engine at the customers, Utah facility, it can be determined that the composition of the gas has significant levels of sulfur and phosphorus oxides. These compounds, when introduced to water, can create acids in the engine oil leading to significant rust and premature wear problems....
Read More »