XP Power

Electrical Equipment & Systems

AC/DC Power Supply suits bulk power and DPA applications.

Available in 4 single output models covering nominal output voltages of 12, 24, 48, or 56 Vdc, 1,500 W GFR1K5 series can be mounted within standard 1U height equipment rack. Optional rack mount enclosure is also available that allows up to 4 GFR1K5 units to be mounted side by side providing up to 6 kW output. All units can be hot swapped and used in redundant configurations. Power supplies use...

Read More »
Electrical Equipment & Systems

AC/DC Power Supplies feature ultra-compact design.

Offering chassis mount screw terminal format option, 15 and 25 W single output models ECL15-S and ECL25-S provide nominal output voltages of +3.3, +5, +9, +12, +15, +24, or +48 Vdc. They operate at full power from -20 to +50°C, derate linearly to 50% output at +70°C, and require no additional heat sinking or forced airflow. Providing 3,000 Vac input to output isolation, units meet...

Read More »
Electrical Equipment & Systems

DC/DC Converters target portable applications.

Measuring 1.02 x 0.49 x 0.36 in. size, IM and IT series 2 and 3 W SIP DC/DC converters offer wide 4:1 input range and input to output isolation of 1.5 kV for up to 1 min. Covering input voltages of 12, 24, and 48 Vdc, each series offers either 9-36 Vdc or 18-75 Vdc input ranges. All outputs are fully regulated to within ±0.5% over all input conditions and to less than ±0.5% over all...

Read More »
Electronic Components & Devices

Filter Module enables design of mil spec power systems.

Rated 200 W for 24/48 V power systems in military vehicles, aircraft, and naval vessels, Model DSF200LV has input voltage of 9-36 Vdc and is clamped at max output voltage of 36 Vdc. Unit provides 7 A continuous output with baseplate temperature of -40 to +100°C. Offering 92-98% efficiency, filter module has low-loss reverse voltage protection and series resistance of 0.26 ohms. It is...

Read More »
AC/DC Power Supply measures only 6 x 4 x 1.54 in.
Electrical Equipment & Systems

AC/DC Power Supply measures only 6 x 4 x 1.54 in.

Designed for getting fitted in 1U enclosures, 250 W AC/DC power supply, CCM250 delivers full output with convection cooling over input voltages from 90-275 Vac, and 200 W from 80 Vac, in ambient temperatures of -10 to +50°C. Unit provides up to 300 W for 500 ms for short-term peak power. Featuring 5 V standby rail, remote on/off switching and power fail signals, unit can be used for control...

Read More »
Electrical Equipment & Systems

DC/DC Converters meet UL/IEC/CSA medical safety standards.

Comprised of 20 models, JHM series is offered in 3 and 6 W board mounted variants and in 24-pin DIP package. Units provide 3,000 Vac input to output isolation for up to 1 min that meets secondary isolation requirements for BF and CF applications and 5,000 Vac isolation for up to 10 msec for defibrillation proof compliance. Full load output is available from -20 to +60°C and up to maximum...

Read More »
Electrical Equipment & Systems

DC/DC Converters are suited for military applications.

Board-mounted and encapsulated DC/DC converters MTC75 (75 W) and MTC150 (150 W) series are available with single or dual outputs in 2.4 x 2.28 x 0.68 in. package and meet MIL-STD 704B-F. Nominal input is 28 Vdc, but input can range from 10-40 Vdc, and addition of EMI filter modules promotes compliance with MIL-STD 704 A-F/1275A-D for EMI immunity and MIL-STD 461F for conducted emissions. Single...

Read More »
Electrical Equipment & Systems

AC/DC Power Supplies fit into 2 x 4 in. footprint.

Measuring 2 x 4 x 0.95 in. and fitting into standard 1U space, 60 Watt VCT60 Series comprises 10 single output models that provide nominal output voltages from +5 to +30 Vdc. Open-frame units feature no-load power consumption of less than 0.5 W and can deliver 125% of rated power for up to 30 sec. Operating from -10 to +70°C, convection cooled power supplies can provide full output power up...

Read More »
AC/DC Power Supplies deliver power density of 6.6 W/cu in.
Electrical Equipment & Systems

AC/DC Power Supplies deliver power density of 6.6 W/cu in.

Measuring just 2.64 x 1.57 x 0.73 in., ECP20 Series 20 W AC/DC PCB mounted power supplies offers single output units providing 3.3, 5, 9, 12, 24, 30 or 48 Vdc and in dual output models providing ±12, ±15 or ±24 Vdc. With low no-load power consumption of less than 0.3 W, ECP20 meets requirements of low standby power consumption applications. All models have peak load capability...

Read More »
Electrical Equipment & Systems

DIN Rail AC/DC Power Supply offers up to 92% efficiency.

Ranging in size from 1.26 x 4.0 x 4.88 in. to 2.36 x 4.60 x 4.88 in., DRS series is comprised of 80, 120, and 240 W single-output models with efficiency levels from 89-92%. Each accommodates universal input range of 85-264 Vac without any input range selectors and accommodate peak load 150% of nominal rating for up to 4 sec max. Series provides output voltage variants of 12, 24, or 48 Vdc, which...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers