Gao Tek
Toronto, ON M1B2K4 CAN
Share:
Glass RFID Tag tracks animals and small objects.
Featuring contactless, read-only design, LF Glass RFID Tag operates in 125 ±6 kHz band with capacity of 256 bits. Tag can be pre-programmed with specific IDs based on customers' requirements. Unit is insensitive to read interferences caused by liquids and metals and is resistant to immersion in salt water, alcohol, oil, 10% HCL, and ammonia. Packaged in waterproof and dustproof housing, tag...
Read More »
DSP Evaluation Board supports motor control development.
Optimized for driving motors and control systems that are based on TMS320F2812 series DSPs, GAO 2812EVM-II uses independent power supply for AD sampling to avoid EMI from CPU core. Board includes 128 K x 16-bit on-chip Flash memory, 18 K x 16-bit on-chip SRAM, and 10 M Ethernet interface, plus RS-232, RS-485, and CAN 2.0 interfaces. Measuring 220 x 160 mm, board also provides 1 DC motor control...
Read More »
RFID Tags are suited for applications in on-metal tagging.
Including Ironside, Survivor, and Halo, passive on-metal Gen 2 RFID Tags provide dependable transmission of data in changing temperatures and mechanical stress situations. Suited for asset tracking applications, AS5678 specified Ironside comes with long read-range of up to 8 m on metal. Class 1 Gen 2 hard tag, Survivor is used in container applications. Supporting read-range of 3-4 m on-metal,...
Read More »
Optical Electric Signal Level Meter suits HFC networks.
With ability to measure reverse direction signal, Model GAO 2112AX comes with power testing, DVB signal measurement, optical fiber signal input, EVM functions, constellation diagrams and optical picture viewing. It has video input and audio input ports. Other features included are 1310 and 1550 nm wavelength, -30 to +20 dBm dynamic range, modulation error ratio (MER) between 18-40 dB, and...
Read More »
Fiber Optic Signal Tester is portable.
Utilizing macro-bending technique, GAO820 Optical Fiber Identifier can check and measure current signal without affecting normal transmission signal. It indicates 5 grades of signal intensity for signal frequencies of 270 Hz ±5%, 1 kHz ±5%, and 2 kHz ±5%. Specifications include 800-1,700 nm wavelength range, InGaAs detector, 250 Â-µm adapter for bare fiber, 900 µm...
Read More »
Signal Level Meter targets CATV industry.
Available with frequency range of 46-870 MHz and 5-870 MHz, Model GAO1185 (B) Super Signal Level Meter can measure signal level of 30-120 dBÂ-µV at 0.1 dB resolution. It offers peak-hold level measurement in LEVEL and SPECTRUM mode that can detect occasional disturbance. Measuring 190 x 80 x 152 mm and weighing about 1,060 g, unit features FCC standard limit test, automatic timing...
Read More »Tester assists installation and maintenance of E1 PCM lines.
Multifunctional GAO5855 E1 Service Tester is designed for installation test, engineering check and acceptance, and daily maintenance of E1 PCM line. Functions include channel test, alarm analysis, fault finding, and signaling analysis of 2 Mbps E1 line. Device features transmission clock maximum deviation of ±999 ppm as well as bit, rate, and other error insertion modes. It also includes...
Read More »Optical Transceivers have range of 1,310 or 1,550 nm.
Hot-swappable XFP modules are 100% CISCO compatible, and can be removed from host device. Pluggable interfaces include data speeds of 10/9.9 G. XFP-based systems offer features for physical network connectivity, including media converters, distance extenders, cross-connects, Ethernet switching and routing equipment, and wave division multiplexing solutions.
Read More »
RF Spectrum Analyzer is lightweight and portable.
Model GAO4022 portable spectrum analyzer implements full phase-locked loop oscillator and all-digitized medium frequency processing technologies. It features RBW/VBW filters and medium frequency/video detectors that employ digital methods. Up to 200 measurement records can be stored within its internal, non-volatile memory, and they can be downloaded to PC through RS232 interface.
Read More »
Microwave Noise Figure Analyzer uses multiple technologies.
Featuring automatic operation, GAO3984 can measure noise figure and gain of linear and quasi-linear networks. It covers frequencies from 10 MHz to 26.5 GHz and offers multiple test bandwidths (100/200/400 kHz and 1/2/4 MHz). Featuring user-friendly UI that facilitates configuration, PC Windows-compatible unit offers various ports for peripherals and can use third-party software for additional...
Read More »