KD Scientific, Inc.
Holliston, MA 01746
Syringe Pump delivers infusion rates from 0.1-1,200 ml/hr.
Offering alternative for micro reliable infusions, EZFlow 2040 features 2.7 in. OLED with separate display that shows volume delivered, volume rate, time, and date. Portable pump offers 5 preset languages, self-diagnostic program that initiates each time pump is powered on, and AC power source with battery backup of approximately 3 hours continuous operation at 25 ml/hr. Unit also includes...
Read More »
Disposable Infusion Pump minimizes cross contamination.
Weighing less than 200 g, CE 0197 certified portable EZFlow 2050 disposable infusion pump is designed to electronically deliver continuous, constantly controlled infusions. Flow rates range from 2-10 ml/hr and choice of 100 ml or 260 ml sterilized reservoir box is offered. Pump can be used multiple times, but reservoir needs to be disposed of after each use. EZFlow 2050 uses 2 AA batteries and...
Read More »
Syringe Pump provides infusion and withdrawal capabilities.
Designed to hold 2 syringes from 0.5 -µl up to 10 ml, Pico Pump delivers picoliter, nanoliter, microliter, and milliliter flow rates ranging from 1.3 picoliters/min up to 0.8788 ml/min depending on syringes selected. Allowing flow rate change while in operation, pump features 2 line display and 6 membrane keys which require only 2 entries to start pumping.
Read More »
Dual Rate Syringe Pump has 2 independent pumping channels.
Designed for continuous operation 24/7 with wide range of syringes from 0.5 -µl up to 140 ml, Gemini 88 Syringe Pump can infuse simultaneously at different rates, or infuse with one syringe and withdraw with other. It can provide continuous delivery when combined with valve box. Pump has high pressure capabilities and TTL and RS-232 interfaces for data acquisition and control, while...
Read More »
Single Syringe Pump can be battery-operated and ac-powered.
Compatible with 20/30 ml, 50/60 ml, and 100 ml syringes, EZFlow 2010 can be used for infusions from 0.1-300 ml/hr with 2.5% accuracy. It features automatic syringe detection and automatically adjusts selected flow rate. LED display, which continuously shows flow rate in ml/hr, can also be toggled to show total volume delivered in ml. Equipped with fast purge feature and 4 audible alarms, pump...
Read More »Syringe Pump can inject radioactive-labeled chemicals.
Due to remote pumping unit and control box, Model KDS 310 Syringe Pump is suited for use in pumping radioactive chemicals when Beta or Gamma shield must be present. Control box can be located up to 6 ft away, and pump shuts off automatically when preset volume is obtained. Used exclusively with micro syringes from 0.5-250 -µl, pump also offers preset rate control and is suited for use with...
Read More »Spill Detector helps protect microscopes from damage.
Comprised of cut-to-size 30 x 30 cm moisture sensing mat and control unit, OS-250 detects spills and leaks of as little as 3 drops of liquid before they cause problems in equipment. Mat is connected to control unit via cable; when liquid is detected, unit sounds audible alarm, flashes LED, and turns off power for any device plugged into single-outlet, solid-state power controller. Switched power...
Read More »Emulsifier provides adjunct/antigen mixing in vaccines.
Designed to operate unattended, Model KDS 330 emulsifies Eleutherosides and other components in adjunct composition. Unit can create viscous fluids/suspensions by forcing fluids back and forth through micro-emulsifying needle. With menu-driven program, user enters syringe diameter and flow rate, and selects dispense volume. When in emulsion mode, pump cycles from infusion to withdrawal...
Read More »High Pressure Pump works with viscous fluids.
Working with syringes from 10 -µl to 140 ml, Model KDS 410 provides accurate flow delivery from 1 nl/min to 145.5 ml/min and can be triggered remotely by foot pedal or switch. Pump can interface to computer through RS-232 interface, offering hands-free mode. Unit is suited for delivery of flow to chemical reactors or fluids to pressurized reactors. Applications include pharmaceutical, chemical,...
Read More »
Spill Detection System works with syringe pumps.
Able to detect spills and leaks down to as little as 3 drops of liquid, OS 250 consists of moisture sensing mat, connection between mat and controller, and switched power outlet. When moisture is detected, system sounds audible alarm, flashes LED, and turns off power of any device plugged into single outlet, solid-state power controller. Reusable mats measure 30 x 30 cm and can be cut to any size.
Read More »