Danray Products LLC
Rockford, IL 61107
Carbide Hardsurfacing Electrodes help increase wear life.
SelectWear 63 open arc wire yields deposit of primary chromium carbides and secondary columbium carbides in martensitic matrix. Its weld deposit delivers abrasion resistance with moderate impact and will stress relief crack check. Solution maintains hardness from 60-63 HRC and wear resistance into 1,200 to 1,400Ã-
Read More »
Safety Sign alerts personnel to bench grinder hazards.
Measuring 5 x 6 x 0.002 in., polyester sign informs onlookers of hazards created by rotating wheels on bench grinders. It also informs operators and employers of proper work-rest and tongue adjustments for compliance with OSHA 29 CFR 1910.215, ANSI B11.9, and ANSI B7.1. Fully compliant with ANSI Z535 standards, product is held in place with 3M acrylic adhesive, which is resistant to chemicals and...
Read More »
Hardsurfacing Electrodes resist wear and impact.
Suitable for multiple pass applications, SelectWear 50 consists of open arc, medium chromium carbide alloy with weld deposit that exhibits resistance to moderate wear and impact. Unit's deposit stress relieves itself by crack checking. Designed to deposit martensitic alloy similar to H12 tool steel, SelectWear 52W is available in gas-shielded or open arc version. It offers resistance to high...
Read More »
Safety Sign warns of hazards around lathes.
Measuring 5 x 6 in. with 0.002 in. thickness, danger sign addresses safety hazards created by rotating chucks and work pieces on lathes. Polyester sign features high-bond-strength acrylic adhesive that has chemical resistance and holding strength even at temperatures up to 350-°F. It complies with ANSI Z535-2006 series of standards for design, application, and use of signs, colors, and symbols...
Read More »Low-Carbon Electrodes suit heavy industrial applications.
SelectAlloy 309L and SelectAlloy 316L are gas-shielded, flux cored, stainless steel electrodes that feature max carbon content of .04%, minimizing carbide precipitation and promoting weld metal resistance to intergranular corrosion. Both produce finely rippled, even, and well washed bead with either 100% carbon dioxide or Argon + 20-25% CO2 shielding gas. Each electrode operates with smooth arc...
Read More »
Electrodes weld ferritic stainless steels with 18% chromium.
Select 439C-Ti and Select 18CrCb-C are used to fabricate exhaust systems and weld exhaust system components such as mufflers and manifolds. Select 439C-Ti welds with minimum of spatter with no burn through on thin material, and provides stable arc transfer at low current settings. Select 18CrCb-C exhibits corrosion and oxidation resistance at high temperatures and is stabilized with columbium to...
Read More »Flux Cored Electrode is suited for low-temperature welding.
Formulated for welding certain HSLA steels, Select 85-Ni3 gas-shielded wire produces weld deposit that contains 3.5% nickel to promote low-temperature toughness. Arc transfer is globular, and bead profile is convex. Low alloy steel electrode, available in .045 and 1/16 in. dia, is designed to weld 3% nickel steels that require postweld stress relief and min 80,000 psi tensile strength. Basic slag...
Read More »
Metal Cored Electrode suits critical cast iron applications.
Able to join cast irons to alloy and carbon steels, Select 2216-C features 41% nickel containing alloy with added stabilizers and yields uniformly smooth bead with minimal spatter. Weld metal has tensile strength in 90,000 psi range and provides 15% elongation. While suited for welding with high-strength nodular or spherical graphite cast irons, product can also be used with all other cast irons...
Read More »
Lathe Chuck Shields provide OSHA and ANSI safety compliance.
Able to deflect chips and coolant, 3/16 in. thick polycarbonate heavy-duty lathe chuck shields provide barrier between chuck, workpiece, and operator. Shields hinge up to left and out of way for changing chuck, using chuck key, and changing the workpiece. Operator doesn't need to reach over chuck to change workpiece, and shields will not interfere with lathes that have rear guard/backsplash.
Read More »
Chip/Coolant Shields are OSHA compliant.
Portable Shields can be used on metalworking and woodworking machinery such as milling machines, drill presses, lathes, and any other machines that need hand-held or attached shield to safeguard personnel from point-of-operation hazards as well as flying chips, sparks, and coolant. Shields comply with OSHA 29 CFR 1910.212 and applicable ANSI B11-series safety standards for machine tools. All are...
Read More »Carbide Hardsurfacing Electrodes help increase wear life.
SelectWear 63 open arc wire yields deposit of primary chromium carbides and secondary columbium carbides in martensitic matrix. Its weld deposit delivers abrasion resistance with moderate impact and will stress relief crack check. Solution maintains hardness from 60-63 HRC and wear resistance into 1,200 to 1,400Ã-
Read More »
Safety Sign alerts personnel to bench grinder hazards.
Measuring 5 x 6 x 0.002 in., polyester sign informs onlookers of hazards created by rotating wheels on bench grinders. It also informs operators and employers of proper work-rest and tongue adjustments for compliance with OSHA 29 CFR 1910.215, ANSI B11.9, and ANSI B7.1. Fully compliant with ANSI Z535 standards, product is held in place with 3M acrylic adhesive, which is resistant to chemicals and...
Read More »
Hardsurfacing Electrodes resist wear and impact.
Suitable for multiple pass applications, SelectWear 50 consists of open arc, medium chromium carbide alloy with weld deposit that exhibits resistance to moderate wear and impact. Unit's deposit stress relieves itself by crack checking. Designed to deposit martensitic alloy similar to H12 tool steel, SelectWear 52W is available in gas-shielded or open arc version. It offers resistance to high...
Read More »
Safety Sign warns of hazards around lathes.
Measuring 5 x 6 in. with 0.002 in. thickness, danger sign addresses safety hazards created by rotating chucks and work pieces on lathes. Polyester sign features high-bond-strength acrylic adhesive that has chemical resistance and holding strength even at temperatures up to 350-°F. It complies with ANSI Z535-2006 series of standards for design, application, and use of signs, colors, and symbols...
Read More »Low-Carbon Electrodes suit heavy industrial applications.
SelectAlloy 309L and SelectAlloy 316L are gas-shielded, flux cored, stainless steel electrodes that feature max carbon content of .04%, minimizing carbide precipitation and promoting weld metal resistance to intergranular corrosion. Both produce finely rippled, even, and well washed bead with either 100% carbon dioxide or Argon + 20-25% CO2 shielding gas. Each electrode operates with smooth arc...
Read More »
Electrodes weld ferritic stainless steels with 18% chromium.
Select 439C-Ti and Select 18CrCb-C are used to fabricate exhaust systems and weld exhaust system components such as mufflers and manifolds. Select 439C-Ti welds with minimum of spatter with no burn through on thin material, and provides stable arc transfer at low current settings. Select 18CrCb-C exhibits corrosion and oxidation resistance at high temperatures and is stabilized with columbium to...
Read More »Updated Web Site for Machine Safeguards and Accessories
New Product Images and a Full-Featured Online Store Rockton, Illinois, May 8, 2007: Danray Products has recently updated its Web site (www.danrayproducts.com) to include new click-to-enlarge product images and a full-featured online store for its machine safeguards and accessories. The new product images show all machine safety shields with dimensions in inches, and these images can be enlarged...
Read More »New Hardsurfacing Brochure
Fort Loramie, OH - Select-Arc, Inc. offers new literature which details the company's complete line of hardsurfacing electrode products. This comprehensive 12-page brochure provides introductory information on hardsurfacing as well as specific product data on Select-Arc's broad range of SelectWear build-up, hardsurfacing, nickel-based and roll rebuilding alloy wires. New featured electrodes...
Read More »Flux Cored Electrode is suited for low-temperature welding.
Formulated for welding certain HSLA steels, Select 85-Ni3 gas-shielded wire produces weld deposit that contains 3.5% nickel to promote low-temperature toughness. Arc transfer is globular, and bead profile is convex. Low alloy steel electrode, available in .045 and 1/16 in. dia, is designed to weld 3% nickel steels that require postweld stress relief and min 80,000 psi tensile strength. Basic slag...
Read More »
Metal Cored Electrode suits critical cast iron applications.
Able to join cast irons to alloy and carbon steels, Select 2216-C features 41% nickel containing alloy with added stabilizers and yields uniformly smooth bead with minimal spatter. Weld metal has tensile strength in 90,000 psi range and provides 15% elongation. While suited for welding with high-strength nodular or spherical graphite cast irons, product can also be used with all other cast irons...
Read More »