Danray Products LLC

Spatter-Free Electrode welds zinc galvanized, primer coated steel.
Electrical Equipment & Systems

Spatter-Free Electrode welds zinc galvanized, primer coated steel.

Available in .035, .045, and 1/16 in. dia, Select 70C-6 ZN consists of carbon steel, composite metal cored electrode that carries E70C-6M-H4 classification per AWS A5.18. Wire provides- stable arc with fine spray transfer that produces spatter-free welds at travel speeds to 80 ipm with- optimized sidewall fusion. Also, arc stability through both standard CV and pulse parameters enables welding...

Read More »
Lathe Chuck Shields safeguard workers for OSHA compliance.
Health, Medical, & Dental Supplies and Equipment

Lathe Chuck Shields safeguard workers for OSHA compliance.

Available in 52 and 62 in. models, 12-gauge Steel Lathe Chuck Shields provide safeguard between individuals and point-of-operation or rotating hazards, and protect individuals from flying chips, sparks, coolant, lubricant, and other particles. Mounting bracket attaches to face of headstock and vertical shield hinges left or right like door, enabling user to change or adjust chuck or workpiece....

Read More »
Barrier-Guard Safety Scale checks openings for OSHA compliance.
Safety & Security Equipment

Barrier-Guard Safety Scale checks openings for OSHA compliance.

OSHA guard safety scale can be used to check openings in barrier guards for compliance with Table O-10 of OSHA 29 CFR 1910.217 during design, installation, and inspection. At- 33 -½ in.- long, scale includes maximum permissible opening of 6 in.- at distances over 31 -½ in. English units (inches) are on both sides of this yellow, 3-section folding scale, which is constructed of anodized...

Read More »
New Wood Lathe Shields
Health, Medical, & Dental Supplies and Equipment

New Wood Lathe Shields

Safeguard Individuals for OSHA and ANSI Compliance Rockford, Illinois - Danray Products LLC recently introduced a line of heavy-duty wood lathe shields designed for manual wood lathes or similar machines (such as small metalworking lathes). The shield provides a barrier between individuals and the point-of-operation hazard. It also deflects chips as well as minimized the possibility of injury...

Read More »
New Lathe Carriage Shields
Health, Medical, & Dental Supplies and Equipment

New Lathe Carriage Shields

Safeguard Individuals for OSHA and ANSI Compliance Rockford, Illinois, - Danray Products LLC has just introduced a line of heavy-duty lathe carriage (saddle) shields that are designed for manual lathes or similar machines. The shield attaches directly to the backside of the carriage so it moves with the carriage as the workpiece is being machined. This provides a barrier between individuals and...

Read More »
Safety Sign warns of hazards around power presses.
Labels Tags Signage & Equipment

Safety Sign warns of hazards around power presses.

Available in 5 x 6 in. and 8-¾ x 10-½ in. sizes, U.S. Copyright Office-registered safety sign addresses main safety hazards created by moving slides and dies on power presses. Adhesive sign can be applied to mechanical, hydraulic, direct-drive (servo), and pneumatic power presses. Product complies with OSHA 29 CFR 1910.145 and ANSI Z535 standards for design, application, and use of signs,...

Read More »
Spatter-Free Electrode welds zinc galvanized, primer coated steel.
Electrical Equipment & Systems

Spatter-Free Electrode welds zinc galvanized, primer coated steel.

Available in .035, .045, and 1/16 in. dia, Select 70C-6 ZN consists of carbon steel, composite metal cored electrode that carries E70C-6M-H4 classification per AWS A5.18. Wire provides- stable arc with fine spray transfer that produces spatter-free welds at travel speeds to 80 ipm with- optimized sidewall fusion. Also, arc stability through both standard CV and pulse parameters enables welding...

Read More »
Lathe Chuck Shields safeguard workers for OSHA compliance.
Health, Medical, & Dental Supplies and Equipment

Lathe Chuck Shields safeguard workers for OSHA compliance.

Available in 52 and 62 in. models, 12-gauge Steel Lathe Chuck Shields provide safeguard between individuals and point-of-operation or rotating hazards, and protect individuals from flying chips, sparks, coolant, lubricant, and other particles. Mounting bracket attaches to face of headstock and vertical shield hinges left or right like door, enabling user to change or adjust chuck or workpiece....

Read More »
Barrier-Guard Safety Scale checks openings for OSHA compliance.
Safety & Security Equipment

Barrier-Guard Safety Scale checks openings for OSHA compliance.

OSHA guard safety scale can be used to check openings in barrier guards for compliance with Table O-10 of OSHA 29 CFR 1910.217 during design, installation, and inspection. At- 33 -½ in.- long, scale includes maximum permissible opening of 6 in.- at distances over 31 -½ in. English units (inches) are on both sides of this yellow, 3-section folding scale, which is constructed of anodized...

Read More »
New Wood Lathe Shields
Health, Medical, & Dental Supplies and Equipment

New Wood Lathe Shields

Safeguard Individuals for OSHA and ANSI Compliance Rockford, Illinois - Danray Products LLC recently introduced a line of heavy-duty wood lathe shields designed for manual wood lathes or similar machines (such as small metalworking lathes). The shield provides a barrier between individuals and the point-of-operation hazard. It also deflects chips as well as minimized the possibility of injury...

Read More »
New Lathe Carriage Shields
Health, Medical, & Dental Supplies and Equipment

New Lathe Carriage Shields

Safeguard Individuals for OSHA and ANSI Compliance Rockford, Illinois, - Danray Products LLC has just introduced a line of heavy-duty lathe carriage (saddle) shields that are designed for manual lathes or similar machines. The shield attaches directly to the backside of the carriage so it moves with the carriage as the workpiece is being machined. This provides a barrier between individuals and...

Read More »
Safety Sign warns of hazards around power presses.
Labels Tags Signage & Equipment

Safety Sign warns of hazards around power presses.

Available in 5 x 6 in. and 8-¾ x 10-½ in. sizes, U.S. Copyright Office-registered safety sign addresses main safety hazards created by moving slides and dies on power presses. Adhesive sign can be applied to mechanical, hydraulic, direct-drive (servo), and pneumatic power presses. Product complies with OSHA 29 CFR 1910.145 and ANSI Z535 standards for design, application, and use of signs,...

Read More »

All Topics