IMAO Fixtureworks

Fixtureworks' New Ring-Handle Detent Pins Meet RoHS and DFARS Standards
Electronic Components & Devices

Fixtureworks' New Ring-Handle Detent Pins Meet RoHS and DFARS Standards

Ring-Handle Detent Pins from Fixtureworks® are available in diameter sizes of 3/16 to 1 in. with grip lengths ranging from 1/2 to 6 in. and pull-out strength from 4 to 40 lb. The units are made from either 303 stainless steel with 316 stainless rings or C1144 steel with steel split rings. Detent pins are suitable for fastening, locating and alignment applications. Units feature zinc-plated clear...

Read More »
Kurt DX6 CrossOver Vise Provides Improved All-Directional Alignment
Portable Tools

Kurt DX6 CrossOver Vise Provides Improved All-Directional Alignment

Fixtureworks’ Kurt DX6 Series Vise with GripSert jaws and inserts offer clamping capacity of up to 9 in. and feature light weight nut and brush seal design. GripSert carbide gripper inserts are offered in 0.14 in. clamping and come with two rows of teeth at different angles with a five-degree taper. The inserts with 3.5 mm clamp surface are designed to penetrate carbide, steel, hardened...

Read More »
Bearing Wheel Covers come in flat, crowned or radial surfaces.
Agricultural & Farming Products

Bearing Wheel Covers come in flat, crowned or radial surfaces.

Bearing Wheel Covers are used as track wheels and guide rollers, components of conveyors and automation systems. Units are made from polyacetal, nylon, UHMW, PEEK, urethane, steel, or stainless steel and are selected based on the usage. Bearing wheel cover assembly consists of cover, snap ring, radial ball bearing and a stud ring when specified. The steel and stainless steel bearings are retained...

Read More »
Fixtureworks to Display Advanced Workholding & Fixturing Components at Westec 2017
Architectural & Civil Engineering Products

Fixtureworks to Display Advanced Workholding & Fixturing Components at Westec 2017

Fixtureworks® (Fraser, MI), a leading supplier of workholding components, fixturing accessories, machine tool elements and material handling components brings a broad spectrum of its products to Booth #809 at 2017 WESTEC, September 12-14, 2017, Los Angeles. Highlighting the exhibit will be its lineup of TriMax vises, ultra low-profile TG GripSerts carbide workholding grippers and the new...

Read More »
Fixtureworks Brings Advanced Fixturing Components & Workholding Solutions at Eastec 2017
Architectural & Civil Engineering Products

Fixtureworks Brings Advanced Fixturing Components & Workholding Solutions at Eastec 2017

Fixtureworks® (Fraser, MI), a leading supplier of fixturing accessories, machine tool elements and material handling components brings a broad spectrum of its products to Booth #5658 for the 2017 EASTEC Exposition, May 16-18, 2017, W. Springfield, MA. Highlighting the exhibit will be its lineup of TriMax vises, ultra-low profile TriGrip carbide grippers and the new Fairlane® GP-Series rubber...

Read More »
TriGrip's Carbide Gripper Inserts and TriMax's Vises designed in G, C, M and T variations.
Construction Equipment and Supplies

TriGrip's Carbide Gripper Inserts and TriMax's Vises designed in G, C, M and T variations.

Preventing use of dovetailing workpieces and vibration dampening, Carbide Gripper Inserts makes holding secure at low clamping forces. At 3.5mm of clamp surface and 0.14 in. clamping, triangular gripper has 2 rows of teeth at different angles with 5° taper. Allowing multiple part clamping, quick change components and easy adjustments, Vises can hold workpieces up to 7.87 in. length and deliver...

Read More »
Fixtureworks to Feature its New Line-Up of Vises, Grippers, Clamps and Positioning Systems at IMTS 2016
Agricultural & Farming Products

Fixtureworks to Feature its New Line-Up of Vises, Grippers, Clamps and Positioning Systems at IMTS 2016

Fixtureworks® (Fraser, MI), a leading supplier of clamps, fixturing accessories, machine tool and material handling products, will showcase several new product lines in Booth W-2377 during IMTS 2016, September 12-17, 2016 McCormick Place, Chicago. Highlighting the exhibit will be its lineup of TRIMAX vises; ultra-low profile TRIGRIP carbide grippers; the APS zero-point positioning system,...

Read More »
Fixtureworks Offers Extensive Lineup of 'One-Touch' Manual Clamps
Electrical Equipment & Systems

Fixtureworks Offers Extensive Lineup of 'One-Touch' Manual Clamps

Fixtureworks® (Fraser, MI), a leading supplier of fixturing accessories, machine tool elements and material handling components offers an extensive new lineup of One-Touch manual clamps.Â-  One-Touch clamps offer easy and efficient clamping and unclamping of a workpiece in one simple operation. Each clamp is designed to eliminate the need for tools when applying the clamping force and...

Read More »
Fixtureworks to Showcase Lineup of Rollers and Bumpers at MODEX 2016
Agricultural & Farming Products

Fixtureworks to Showcase Lineup of Rollers and Bumpers at MODEX 2016

Fixtureworks® (Fraser, MI), www.fixtureworks.net a leading supplier of material handling components, fixturing accessories and machine tool elements will bring its broad spectrum of Fairlane® Products rollers and bumpers to booth 1768, at MODEX 2016, April 4-7, 2016, Atlanta, GA. Rugged, wear resistant and smooth, Fairlane Products rollers and bumpers are in stock and available in a...

Read More »
Fixturing and Material Handling Technologies to be the Focus at WESTEC 2015
Electrical Equipment & Systems

Fixturing and Material Handling Technologies to be the Focus at WESTEC 2015

Fixtureworks® (Fraser, MI), a leading supplier of fixturing accessories, machine tool elements and material handling components, will bring a broad spectrum of its products to booth no. 808 at WESTEC 2015, which takes place in Los Angeles, September 15-17, 2015. The products displayed will highlight the wide variety of fixturing, clamping and material handling components that allow...

Read More »

All Topics