Imao-Fixtureworks
Fraser, MI 48026
New Vise Force Wedge Clamps Feature Low Profile Dovetail Design
The Vise Force® Wedge Clamps are offered in 1.0, 1.5, and 2 in. jaw widths with serrated and machinable clamping surfaces. The units are designed for clamping multiple workpieces such as steel, brass, aluminum and plastic. The clamps come with internal return spring that avoids the buildup of chip and provide closer placement of multiple clamps. The unit’s dovetail design reduces movement,...
Read More »
Fixtureworks to Feature Expanded Product Line at IMTS 2018
Fixtureworks® (Fraser, MI), a leading supplier of clamps, fixturing accessories, machine tool and material handling products, will showcase several new product lines in Booth W-432377 at IMTS, September 10-15, 2018 McCormick Place, Chicago. Highlighting the exhibit will be its lineup of all-new bearing wheels, indexing plungers and TG GripSert inserts from Fairlane® Products; Imao® One-Touch...
Read More »
Fixtureworks' New Ring-Handle Detent Pins Meet RoHS and DFARS Standards
Ring-Handle Detent Pins from Fixtureworks® are available in diameter sizes of 3/16 to 1 in. with grip lengths ranging from 1/2 to 6 in. and pull-out strength from 4 to 40 lb. The units are made from either 303 stainless steel with 316 stainless rings or C1144 steel with steel split rings. Detent pins are suitable for fastening, locating and alignment applications. Units feature zinc-plated clear...
Read More »
Kurt DX6 CrossOver Vise Provides Improved All-Directional Alignment
Fixtureworks’ Kurt DX6 Series Vise with GripSert jaws and inserts offer clamping capacity of up to 9 in. and feature light weight nut and brush seal design. GripSert carbide gripper inserts are offered in 0.14 in. clamping and come with two rows of teeth at different angles with a five-degree taper. The inserts with 3.5 mm clamp surface are designed to penetrate carbide, steel, hardened...
Read More »
Bearing Wheel Covers come in flat, crowned or radial surfaces.
Bearing Wheel Covers are used as track wheels and guide rollers, components of conveyors and automation systems. Units are made from polyacetal, nylon, UHMW, PEEK, urethane, steel, or stainless steel and are selected based on the usage. Bearing wheel cover assembly consists of cover, snap ring, radial ball bearing and a stud ring when specified. The steel and stainless steel bearings are retained...
Read More »
Fixtureworks to Display Advanced Workholding & Fixturing Components at Westec 2017
Fixtureworks® (Fraser, MI), a leading supplier of workholding components, fixturing accessories, machine tool elements and material handling components brings a broad spectrum of its products to Booth #809 at 2017 WESTEC, September 12-14, 2017, Los Angeles. Highlighting the exhibit will be its lineup of TriMax vises, ultra low-profile TG GripSerts carbide workholding grippers and the new...
Read More »
Fixtureworks Brings Advanced Fixturing Components & Workholding Solutions at Eastec 2017
Fixtureworks® (Fraser, MI), a leading supplier of fixturing accessories, machine tool elements and material handling components brings a broad spectrum of its products to Booth #5658 for the 2017 EASTEC Exposition, May 16-18, 2017, W. Springfield, MA. Highlighting the exhibit will be its lineup of TriMax vises, ultra-low profile TriGrip carbide grippers and the new Fairlane® GP-Series rubber...
Read More »
TriGrip's Carbide Gripper Inserts and TriMax's Vises designed in G, C, M and T variations.
Preventing use of dovetailing workpieces and vibration dampening, Carbide Gripper Inserts makes holding secure at low clamping forces. At 3.5mm of clamp surface and 0.14 in. clamping, triangular gripper has 2 rows of teeth at different angles with 5° taper. Allowing multiple part clamping, quick change components and easy adjustments, Vises can hold workpieces up to 7.87 in. length and deliver...
Read More »
Fixtureworks to Feature its New Line-Up of Vises, Grippers, Clamps and Positioning Systems at IMTS 2016
Fixtureworks® (Fraser, MI), a leading supplier of clamps, fixturing accessories, machine tool and material handling products, will showcase several new product lines in Booth W-2377 during IMTS 2016, September 12-17, 2016 McCormick Place, Chicago. Highlighting the exhibit will be its lineup of TRIMAX vises; ultra-low profile TRIGRIP carbide grippers; the APS zero-point positioning system,...
Read More »
Fixtureworks Offers Extensive Lineup of 'One-Touch' Manual Clamps
Fixtureworks® (Fraser, MI), a leading supplier of fixturing accessories, machine tool elements and material handling components offers an extensive new lineup of One-Touch manual clamps.Â- One-Touch clamps offer easy and efficient clamping and unclamping of a workpiece in one simple operation. Each clamp is designed to eliminate the need for tools when applying the clamping force and...
Read More »
New Vise Force Wedge Clamps Feature Low Profile Dovetail Design
The Vise Force® Wedge Clamps are offered in 1.0, 1.5, and 2 in. jaw widths with serrated and machinable clamping surfaces. The units are designed for clamping multiple workpieces such as steel, brass, aluminum and plastic. The clamps come with internal return spring that avoids the buildup of chip and provide closer placement of multiple clamps. The unit’s dovetail design reduces movement,...
Read More »
Fixtureworks to Feature Expanded Product Line at IMTS 2018
Fixtureworks® (Fraser, MI), a leading supplier of clamps, fixturing accessories, machine tool and material handling products, will showcase several new product lines in Booth W-432377 at IMTS, September 10-15, 2018 McCormick Place, Chicago. Highlighting the exhibit will be its lineup of all-new bearing wheels, indexing plungers and TG GripSert inserts from Fairlane® Products; Imao® One-Touch...
Read More »
Fixtureworks' New Ring-Handle Detent Pins Meet RoHS and DFARS Standards
Ring-Handle Detent Pins from Fixtureworks® are available in diameter sizes of 3/16 to 1 in. with grip lengths ranging from 1/2 to 6 in. and pull-out strength from 4 to 40 lb. The units are made from either 303 stainless steel with 316 stainless rings or C1144 steel with steel split rings. Detent pins are suitable for fastening, locating and alignment applications. Units feature zinc-plated clear...
Read More »
Kurt DX6 CrossOver Vise Provides Improved All-Directional Alignment
Fixtureworks’ Kurt DX6 Series Vise with GripSert jaws and inserts offer clamping capacity of up to 9 in. and feature light weight nut and brush seal design. GripSert carbide gripper inserts are offered in 0.14 in. clamping and come with two rows of teeth at different angles with a five-degree taper. The inserts with 3.5 mm clamp surface are designed to penetrate carbide, steel, hardened...
Read More »
Bearing Wheel Covers come in flat, crowned or radial surfaces.
Bearing Wheel Covers are used as track wheels and guide rollers, components of conveyors and automation systems. Units are made from polyacetal, nylon, UHMW, PEEK, urethane, steel, or stainless steel and are selected based on the usage. Bearing wheel cover assembly consists of cover, snap ring, radial ball bearing and a stud ring when specified. The steel and stainless steel bearings are retained...
Read More »
Fixtureworks to Display Advanced Workholding & Fixturing Components at Westec 2017
Fixtureworks® (Fraser, MI), a leading supplier of workholding components, fixturing accessories, machine tool elements and material handling components brings a broad spectrum of its products to Booth #809 at 2017 WESTEC, September 12-14, 2017, Los Angeles. Highlighting the exhibit will be its lineup of TriMax vises, ultra low-profile TG GripSerts carbide workholding grippers and the new...
Read More »
Fixtureworks Brings Advanced Fixturing Components & Workholding Solutions at Eastec 2017
Fixtureworks® (Fraser, MI), a leading supplier of fixturing accessories, machine tool elements and material handling components brings a broad spectrum of its products to Booth #5658 for the 2017 EASTEC Exposition, May 16-18, 2017, W. Springfield, MA. Highlighting the exhibit will be its lineup of TriMax vises, ultra-low profile TriGrip carbide grippers and the new Fairlane® GP-Series rubber...
Read More »
TriGrip's Carbide Gripper Inserts and TriMax's Vises designed in G, C, M and T variations.
Preventing use of dovetailing workpieces and vibration dampening, Carbide Gripper Inserts makes holding secure at low clamping forces. At 3.5mm of clamp surface and 0.14 in. clamping, triangular gripper has 2 rows of teeth at different angles with 5° taper. Allowing multiple part clamping, quick change components and easy adjustments, Vises can hold workpieces up to 7.87 in. length and deliver...
Read More »
Fixtureworks to Feature its New Line-Up of Vises, Grippers, Clamps and Positioning Systems at IMTS 2016
Fixtureworks® (Fraser, MI), a leading supplier of clamps, fixturing accessories, machine tool and material handling products, will showcase several new product lines in Booth W-2377 during IMTS 2016, September 12-17, 2016 McCormick Place, Chicago. Highlighting the exhibit will be its lineup of TRIMAX vises; ultra-low profile TRIGRIP carbide grippers; the APS zero-point positioning system,...
Read More »
Fixtureworks Offers Extensive Lineup of 'One-Touch' Manual Clamps
Fixtureworks® (Fraser, MI), a leading supplier of fixturing accessories, machine tool elements and material handling components offers an extensive new lineup of One-Touch manual clamps.Â- One-Touch clamps offer easy and efficient clamping and unclamping of a workpiece in one simple operation. Each clamp is designed to eliminate the need for tools when applying the clamping force and...
Read More »