W. L. Gore & Associates, Inc.

Cleaning Products & Equipment

Flame-Resistant Outerwear targets oil and gas workers.

Featuring GORE-TEX® PYRAD® Fabric for use in foul weather, GORE® FR Apparel meets demanding needs of oil and gas workers. Jacket, bib, and detachable hood combination provides protection from incidental flame exposure and weather protection across wide range of environmental conditions, while offering moisture management to optimize comfort and safety. Lightweight 2-layer ePTFE membrane...

Read More »
Non-Industrial Products

Cap Liners improve airflow even after contact with chemicals.

Used to maintain structural integrity of containers of chemicals for agricultural and household use, 3FL-363 and 3FL-373- provide breathability without leaking and maintain maximum airflow. Both 3FL (Full Face Foam Liner) cap liners, effective throughout distribution, transportation, and storage, are 1 mm thick, repeatedly reseal in use, and resist effects of aggressive chemicals. Venting can...

Read More »
Portable Electronic Vents provide waterproof protection.
Fluid & Gas Flow Equipment

Portable Electronic Vents provide waterproof protection.

Intended for smartphones and portable electronic devices, PE3 Series provides typical airflow of 3,300 ml/min/cm-³, equalizing internal  pressure, minimizing stress on seals, and eliminating transducer bias. At same time, vents protect internal electronics by serving as barrier against liquid, dust, and dirt. Units are engineered with black oleophobic membrane and gray PET nonwoven...

Read More »
Breather Vent protects automotive electronic housings.
Fluid & Gas Flow Equipment

Breather Vent protects automotive electronic housings.

GORE® PolyVent Compact Series features microporous GORE™ membrane that breathes to allow airflow yet blocks entry of water and contaminants. This provides protection for sensitive components, such as sensors, motors, and control units, as well as pressure equalization. Vent diameter is 14.3 mm, and 3.45 mm installed height minimizes external protrusion and vulnerability to mechanical impacts...

Read More »
Electrical Equipment & Systems

Right-Angle 2.92 mm Connector suits spaceflight applications.

Instrument-grade- ZQA features non-bifurcated swept contact design for use with low-loss microwave coaxial cable qualified for 32 GHz spaceflight applications. Design promotes impedance control, maintaining low reflection path as signal transitions. Connector uses dielectric support at its interface, promoting durability while maintaining electrical performance and intermateability with...

Read More »
Fluid & Gas Flow Equipment

Adhesive Vent extends life of outdoor electronic enclosures.

Increasing reliability when exposed to changing weather and environmental conditions, Series VE9 Adhesive Vent enables outdoor electronic enclosures to be designed with normal seals and gaskets without necessitating ruggedized models. Adhesive and all-ePTFE construction facilitates integration by allowing vent to be mounted on housing interior or exterior. Combined with UL-listed ePTFE membrane,...

Read More »
GORE(TM) Leaky Feeder Antennas Enable OnAir In-Flight Connectivity for Dassault Business Jets
Communication Systems & Equipment

GORE(TM) Leaky Feeder Antennas Enable OnAir In-Flight Connectivity for Dassault Business Jets

Paris, France –- W. L. Gore Associates announced that its GORE™ Leaky Feeder Antenna has been selected for Dassault Aviation’s Falcon 7X jet to enable OnAir’s in-flight system to deliver GSM connectivity during flight. Dassault asked W. L. Gore & Associates and OnAir to develop a system that would enable passengers to use their own mobile phones and electronic devices rather than...

Read More »
Protective Vent suits large outdoor electronic enclosures.
Fluid & Gas Flow Equipment

Protective Vent suits large outdoor electronic enclosures.

Specifically engineered for outdoor enclosures with volume in excess of 200 L, GORE® PolyVent XL enables internal pressure to remain equalized during changes in environmental temperatures, helping to prevent seal failure. Constructed of breathable membrane, IP69K-rated vent equalizes internal pressure by allowing air to flow freely into and out of housing at rate of 16 Lpm at 12 mbar. GORE®...

Read More »
Gore Announces Enhanced Venting and Cooling Solutions for Improved Performance at CTIA 2013
Electrical Equipment & Systems

Gore Announces Enhanced Venting and Cooling Solutions for Improved Performance at CTIA 2013

Elkton, Maryland – At the CTIA 2013™ Mobile Marketplace in Las Vegas, Nevada, May 21-23, in Booth 4234, W. L. Gore & Associates will be debuting its latest venting and cabinet cooling products that enable the telecommunications industry to remain connected and protected. Gore will be displaying new venting products and cooling filters that ensure reliability and long-lasting performance...

Read More »
Automotive Vents help protect powertrain components.
Fluid & Gas Flow Equipment

Automotive Vents help protect powertrain components.

Series AVS 41, P/N VE2048, GORE® Automotive Vents equalize pressure, preventing contamination from water, dust, dirt, and automotive fluids in components such as transmissions, transfer cases, power transfer units, axles, and limited slip couplings. Units include pre-filter that protects membrane from particles in air stream. Protective cap serves as barrier against impact, further ensuring...

Read More »
Cleaning Products & Equipment

Flame-Resistant Outerwear targets oil and gas workers.

Featuring GORE-TEX® PYRAD® Fabric for use in foul weather, GORE® FR Apparel meets demanding needs of oil and gas workers. Jacket, bib, and detachable hood combination provides protection from incidental flame exposure and weather protection across wide range of environmental conditions, while offering moisture management to optimize comfort and safety. Lightweight 2-layer ePTFE membrane...

Read More »
Non-Industrial Products

Cap Liners improve airflow even after contact with chemicals.

Used to maintain structural integrity of containers of chemicals for agricultural and household use, 3FL-363 and 3FL-373- provide breathability without leaking and maintain maximum airflow. Both 3FL (Full Face Foam Liner) cap liners, effective throughout distribution, transportation, and storage, are 1 mm thick, repeatedly reseal in use, and resist effects of aggressive chemicals. Venting can...

Read More »
Portable Electronic Vents provide waterproof protection.
Fluid & Gas Flow Equipment

Portable Electronic Vents provide waterproof protection.

Intended for smartphones and portable electronic devices, PE3 Series provides typical airflow of 3,300 ml/min/cm-³, equalizing internal  pressure, minimizing stress on seals, and eliminating transducer bias. At same time, vents protect internal electronics by serving as barrier against liquid, dust, and dirt. Units are engineered with black oleophobic membrane and gray PET nonwoven...

Read More »
Breather Vent protects automotive electronic housings.
Fluid & Gas Flow Equipment

Breather Vent protects automotive electronic housings.

GORE® PolyVent Compact Series features microporous GORE™ membrane that breathes to allow airflow yet blocks entry of water and contaminants. This provides protection for sensitive components, such as sensors, motors, and control units, as well as pressure equalization. Vent diameter is 14.3 mm, and 3.45 mm installed height minimizes external protrusion and vulnerability to mechanical impacts...

Read More »
Electrical Equipment & Systems

Right-Angle 2.92 mm Connector suits spaceflight applications.

Instrument-grade- ZQA features non-bifurcated swept contact design for use with low-loss microwave coaxial cable qualified for 32 GHz spaceflight applications. Design promotes impedance control, maintaining low reflection path as signal transitions. Connector uses dielectric support at its interface, promoting durability while maintaining electrical performance and intermateability with...

Read More »
Fluid & Gas Flow Equipment

Adhesive Vent extends life of outdoor electronic enclosures.

Increasing reliability when exposed to changing weather and environmental conditions, Series VE9 Adhesive Vent enables outdoor electronic enclosures to be designed with normal seals and gaskets without necessitating ruggedized models. Adhesive and all-ePTFE construction facilitates integration by allowing vent to be mounted on housing interior or exterior. Combined with UL-listed ePTFE membrane,...

Read More »
GORE(TM) Leaky Feeder Antennas Enable OnAir In-Flight Connectivity for Dassault Business Jets
Communication Systems & Equipment

GORE(TM) Leaky Feeder Antennas Enable OnAir In-Flight Connectivity for Dassault Business Jets

Paris, France –- W. L. Gore Associates announced that its GORE™ Leaky Feeder Antenna has been selected for Dassault Aviation’s Falcon 7X jet to enable OnAir’s in-flight system to deliver GSM connectivity during flight. Dassault asked W. L. Gore & Associates and OnAir to develop a system that would enable passengers to use their own mobile phones and electronic devices rather than...

Read More »
Protective Vent suits large outdoor electronic enclosures.
Fluid & Gas Flow Equipment

Protective Vent suits large outdoor electronic enclosures.

Specifically engineered for outdoor enclosures with volume in excess of 200 L, GORE® PolyVent XL enables internal pressure to remain equalized during changes in environmental temperatures, helping to prevent seal failure. Constructed of breathable membrane, IP69K-rated vent equalizes internal pressure by allowing air to flow freely into and out of housing at rate of 16 Lpm at 12 mbar. GORE®...

Read More »
Gore Announces Enhanced Venting and Cooling Solutions for Improved Performance at CTIA 2013
Electrical Equipment & Systems

Gore Announces Enhanced Venting and Cooling Solutions for Improved Performance at CTIA 2013

Elkton, Maryland – At the CTIA 2013™ Mobile Marketplace in Las Vegas, Nevada, May 21-23, in Booth 4234, W. L. Gore & Associates will be debuting its latest venting and cabinet cooling products that enable the telecommunications industry to remain connected and protected. Gore will be displaying new venting products and cooling filters that ensure reliability and long-lasting performance...

Read More »
Automotive Vents help protect powertrain components.
Fluid & Gas Flow Equipment

Automotive Vents help protect powertrain components.

Series AVS 41, P/N VE2048, GORE® Automotive Vents equalize pressure, preventing contamination from water, dust, dirt, and automotive fluids in components such as transmissions, transfer cases, power transfer units, axles, and limited slip couplings. Units include pre-filter that protects membrane from particles in air stream. Protective cap serves as barrier against impact, further ensuring...

Read More »

All Topics