Intellidrives, Inc
Philadelphia, PA 19152
Direct-Drive Rotary Stages have zero-backlash design.
Designed for optimal angular positioning and velocity control, AccuRing series consists of large aperture rotary stages with no gear wear/vibration. Products are rated for 800 rpm continuous rotation and can also be configured as multi-axis gimbals. In addition to angular contact bearings and precision-machined rotating shaft, stages feature encoder resolutions up to 0.16 arc sec, accuracy of -
Read More »
Single-Axis Linear Actuator achieves speed to 200 mm/sec.
As motorized ball-screw carriage guided by linear bearing, BSMA-058 has aluminum stage base supplied with dust-proof strip to prevent particle ingress/egress. Single or double carriage versions are available, stroke ranges from 050-600 mm, and repeatability is 5 microns. Suited for high-speed single-axis or multi-axis motion automation application, actuator is offers 2.5 and 5 mm ball screw...
Read More »
Linear Actuators have low-profile narrow positioning stages.
Model LSMA-175 precision linear actuators feature compact, fully-enclosed stages that measure 25 x 50 mm. Stages have travel ranges between 50 and 200 mm, with positioning repeatability of 0.31 micron, and maximum speed of 10 mm/sec with 8 kg payload. Micrometer-grade screw with lead pitch of 0.5 mm, miniature linear bearing, and non-contact limit switches with stepper or DC servo motor are...
Read More »
Multi-Axis Systems provide travel up to 200 mm.
Built with LSMA-175 Series motorized actuators, LSMA-175-XYZ Multi-Axis Systems offer load capacity of 8 kg and straightness of 5 microns. Motorized stages are driven by brushless or stepper motor with precision ground ball screw, and offer resolution up to 0.1 micron. Actuator has low-profile, monolithic design, making systems suited for integration in high precision measurement and...
Read More »
Direct Drive Linear Actuator offers dual-mode operation.
Able to operate in position and force modes, I-Force(TM) Series uses non-commutated, linear, coreless, brushless servomotors. Precision positioning is achievable due to 0.05-10 micron, contact-less linear position feedback and built-in linear guide system. Actuators can achieve accelerations above 10 G and cycle rates above 20 Hz. Supplied with digital I-Drive(TM) servo amps, products have 5-50...
Read More »
Linear Drive Actuators eliminate friction and backlash.
Series BB 2-piece systems consist of passive, magnet-free, stationary platen, serving as precision linear guideway and moving forcer with built-in roller bearings. All bearings are magnetically preloaded and do not require gap adjustments. Units have force ranges from 5 to 15 lb, open loop motion repeatability of 0.0001 in., and travel length up to 80 in. Forcers are capable of velocities of 60...
Read More »
Direct-Drive Rotary Stages have zero-backlash design.
Designed for optimal angular positioning and velocity control, AccuRing series consists of large aperture rotary stages with no gear wear/vibration. Products are rated for 800 rpm continuous rotation and can also be configured as multi-axis gimbals. In addition to angular contact bearings and precision-machined rotating shaft, stages feature encoder resolutions up to 0.16 arc sec, accuracy of -
Read More »
Single-Axis Linear Actuator achieves speed to 200 mm/sec.
As motorized ball-screw carriage guided by linear bearing, BSMA-058 has aluminum stage base supplied with dust-proof strip to prevent particle ingress/egress. Single or double carriage versions are available, stroke ranges from 050-600 mm, and repeatability is 5 microns. Suited for high-speed single-axis or multi-axis motion automation application, actuator is offers 2.5 and 5 mm ball screw...
Read More »
Linear Actuators have low-profile narrow positioning stages.
Model LSMA-175 precision linear actuators feature compact, fully-enclosed stages that measure 25 x 50 mm. Stages have travel ranges between 50 and 200 mm, with positioning repeatability of 0.31 micron, and maximum speed of 10 mm/sec with 8 kg payload. Micrometer-grade screw with lead pitch of 0.5 mm, miniature linear bearing, and non-contact limit switches with stepper or DC servo motor are...
Read More »
Multi-Axis Systems provide travel up to 200 mm.
Built with LSMA-175 Series motorized actuators, LSMA-175-XYZ Multi-Axis Systems offer load capacity of 8 kg and straightness of 5 microns. Motorized stages are driven by brushless or stepper motor with precision ground ball screw, and offer resolution up to 0.1 micron. Actuator has low-profile, monolithic design, making systems suited for integration in high precision measurement and...
Read More »Digital Delivery Group to Distribute Lifeware 1.0.1 Home Control Software
Deal includes dealer training for Lifeware and HP digital entertainment products. Columbus, OH - April 10, 2006 - Exceptional Innovation, manufacturers of Lifeware(TM) home control software, today announced the signing of a national distribution program with the Digital Delivery Group (DDG). This agreement, coupled with the launch of Exceptional Innovation's Lifeware dealer training and...
Read More »
Direct Drive Linear Actuator offers dual-mode operation.
Able to operate in position and force modes, I-Force(TM) Series uses non-commutated, linear, coreless, brushless servomotors. Precision positioning is achievable due to 0.05-10 micron, contact-less linear position feedback and built-in linear guide system. Actuators can achieve accelerations above 10 G and cycle rates above 20 Hz. Supplied with digital I-Drive(TM) servo amps, products have 5-50...
Read More »
Linear Drive Actuators eliminate friction and backlash.
Series BB 2-piece systems consist of passive, magnet-free, stationary platen, serving as precision linear guideway and moving forcer with built-in roller bearings. All bearings are magnetically preloaded and do not require gap adjustments. Units have force ranges from 5 to 15 lb, open loop motion repeatability of 0.0001 in., and travel length up to 80 in. Forcers are capable of velocities of 60...
Read More »