Siliconstor
Fremont, CA 94538
Share:
Hendrickson Launches Next Generation Front Steer Axle STEERTEK NXT
WOODRIDGE, Ill. - Hendrickson Truck Suspension Systems officials announce the launch of the innovative, STEERTEK NXT, the next generation of their road proven, weight saving STEERTEK fabricated front steer axle. Designed for the global market, STEERTEK NXT will accommodate a variety of wheel end and knuckle designs and features scalable architecture to meet a capacity range of 8,000 pounds (3.6t)...
Read More »
Hendrickson Broadens PRIMAAX EX Applications
WOODRIDGE, Ill. - Officials of Hendrickson Truck Commercial Vehicle Systems recently announced further proliferation of PRIMAAXÃ-® EX heavy-duty vocational rear air suspension at numerous OEMs. As PRIMAAX EX grows in popularity, so does customer demand for new configurations, such as single- and tridem-axle variants, multiple ride heights, and disc brake-compatibility, stated Carmen Cardillo,...
Read More »Truck Bumper uses dent- and corrosion-resistant material.
Designed for Mack CH, CHN, and CHU trucks, Hendrickson Aero BrightÃ-® 3-Piece Bumper combines steel chromed center sections with HAB end caps for durability. Matching luster of chrome center section, lightweight end caps use thermoplastic polyolefin plastic and weatherable paint films with thick-sheet thermoforming technology.
Read More »Interposer Solution connects SATA drives to SAS systems.
Based on AAMUX technology, SS1320 Active-Active Multiplexer chip enables storage vendors to build SATA Interposer board that interconnects SATA drives with enterprise-class features to SAS and Fibre Channel-to-SATA storage systems. It minimizes SATA spin-up delays with optimized drive detection times and offers in-band diagnostic controls for PHY error counter and asynchronous host notification....
Read More »Interface Card utilizes active-active multiplexer.
Based on AAMUX technology with installed base of over 400,000 ports, Model SS9130 Interposer Card provides storage system manufacturers with solution for adding SATA hard drives to enterprise storage systems. It consists of SS1300 active-active multiplexer device, dual SATA or SAS-STP host interface, SATA device interface, and support components and layout circuitry for connecting SATA drives to...
Read More »
Hendrickson Launches Next Generation Front Steer Axle STEERTEK NXT
WOODRIDGE, Ill. - Hendrickson Truck Suspension Systems officials announce the launch of the innovative, STEERTEK NXT, the next generation of their road proven, weight saving STEERTEK fabricated front steer axle. Designed for the global market, STEERTEK NXT will accommodate a variety of wheel end and knuckle designs and features scalable architecture to meet a capacity range of 8,000 pounds (3.6t)...
Read More »
Hendrickson Broadens PRIMAAX EX Applications
WOODRIDGE, Ill. - Officials of Hendrickson Truck Commercial Vehicle Systems recently announced further proliferation of PRIMAAXÃ-® EX heavy-duty vocational rear air suspension at numerous OEMs. As PRIMAAX EX grows in popularity, so does customer demand for new configurations, such as single- and tridem-axle variants, multiple ride heights, and disc brake-compatibility, stated Carmen Cardillo,...
Read More »Hendrickson's Global Ride Solutions Brochure Spotlights a Comprehensive Product Line
ITASCA, Ill. - Published in March, Hendrickson's updated Global Ride Solutions brochure highlights a full range of products for the commercial transportation industry around the world. In the recently published 20-page brochure, Hendrickson taps the color red from its logo as a symbol of more than 95 years of vision, engineering expertise and manufacturing excellence. The brochure provides an...
Read More »Hendrickson Names Jerry Reynolds Director of North American Field Service
ITASCA, Ill. - Jerry Reynolds recently assumed duties as director of North American field service for Hendrickson. Reynolds reports directly to Baine Adams, vice president of global sales and marketing, and is responsible for all field service activities and reports. All regional and national service managers report to Reynolds. For the past three years, he served as national service manager....
Read More »Truck Bumper uses dent- and corrosion-resistant material.
Designed for Mack CH, CHN, and CHU trucks, Hendrickson Aero BrightÃ-® 3-Piece Bumper combines steel chromed center sections with HAB end caps for durability. Matching luster of chrome center section, lightweight end caps use thermoplastic polyolefin plastic and weatherable paint films with thick-sheet thermoforming technology.
Read More »David Templeton Named Vice President of Human Resources for Hendrickson
ITASCA, Ill. - David B. Templeton recently assumed duties as vice president of human resources (HR) for Hendrickson, announced Gary Gerstenslager, president and chief executive officer. Templeton most recently served in a dual role leading Hendrickson's HR functions company-wide and also serving as director of HR for Hendrickson Trailer Suspension Systems in Canton, Ohio. David Decker has joined...
Read More »Hendrickson Auxiliary Axle Systems Earns ISO Certification
Hendrickson Auxiliary Axle Systems certified to ISO/TS 16949: 2002 by VCA HEBRON, Ohio - Hendrickson Auxiliary Axle Systems recently earned ISO/TS 16949: 2002 Quality Management System Certification by the Vehicle Certification Agency (VCA), an independent accredited management systems registrar. This certification illustrates our commitment to uncompromised safety, quality and customer...
Read More »Matt Boler Promoted to Development Post at The Boler Company, Kurt Kern Heads Hendrickson Bumper and Trim
ITASCA, Ill - Matt Boler assumed duties as vice president of corporate development for The Boler Company, reporting to John Boler, president and chief executive officer. Kurt Kern succeeded Boler as general manager of Hendrickson Bumper and Trim. The Boler Company is Hendrickson's parent organization. Boler will focus on strategic planning including recommendations for potential joint ventures,...
Read More »Hendrickson Announces the Completion of the Dana Trailer Products Acquisition
ITASCA, Ill. - Gary Gerstenslager, president and chief operating officer of Hendrickson, announced that the company on Jan. 5 finalized its acquisition of the US and Canadian trailer axle manufacturing assets of Dana Corporation. The transaction included Hendrickson acquiring the operations and assets at the Dana trailer axle manufacturing plant in Lugoff, S.C. In addition, Hendrickson also...
Read More »Mike Keeler Tabbed to Lead Hendrickson International Operations
ITASCA, Ill. - Mike Keeler assumed duties as vice president of international operations for Hendrickson and Mike Gottschalk succeeded Keeler as general manager of Hendrickson Auxiliary Axle Systems. Mike Keeler's appointment allows us to coordinate our global operations, sales and product development while integrating our joint venture in India more effectively with our U.S. based divisions,...
Read More »