Transducers USA, Inc.
Elk Grove Village, IL 60007
New Plastic Tonelight Indicators Delivers Both Audible and Visual Warning Signal
The TRIP-LB200P Plastic Tonelight Indicators are suitable for alarms, low-voltage, low-pressure, high-radiation, dangerous conditions and liquid detector applications. The products feature four-position terminal blocks-two for RED LED and two for AUDIO ALARM. The indicators are offered with lens in standard (red) and optional colors (green, yellow, orange, blue and white). They can be operated in...
Read More »
Transducer USA Launches New Audio Components for Use in Wet Applications
The Transducer’s Water-Resistant Input/Output Audio Components include microphones and audible indicators that are built to meet IP-57, IP-65 and/or IP-67 standards. The units are suitable for bilge pumps, sump pumps, marine instruments or other outdoor or indoor wet applications. The microphones offer an operating frequency range of 100 to 20 kHz with Signal-to-Noise ratio of 60 dBA. The...
Read More »
New Low Frequency Buzzer Features an Almost Infinite Life for Ceramic Piezo Audio Output
The new buzzer, TRIP-2612P(S), performs on a lower frequency, delivering 400 Hz at a minimum of 95dB with a standard of 12DC. It meets the NFPA code requirement and is RoHS compliant. The unit comes with a flame-retardant cover and an easy, stable PC board mount and connection.
Read More »
New Tonelight Security Alarm Features an Operating Frequency of 2.4 - 3.7 kHz
The TRIP-6692 Tonelight™ Security Alarm comes with dual notifiers – a red or green strobe light and a loud siren. The product is available in package of 5 x 3 x 1.5 in. that consists of a 2-wire lead and 3-wire lead. The alarm generates 100dB at 30 cm of wave siren output with its red strobe light. The device is rated to 12 VDC (voltage) and 300 mA (current) with a minimum sound pressure...
Read More »
Transducer Launches TRPI-2440L(G) Piezo Impact Switch That is Immune to Environmental Stresses and Conditions
The TRPI-2440L(G) Piezo Impact Switch is designed to identify pressure and changes in impact. The device features an output voltage of 40 mVp/G, capacitance of 12000 pF +30% and an insulation resistance of 100 MΩ Min. The switch can be operated in -20⁰C to +70⁰C temperature range and is offered in 24 mm diameter housing. The piezo crystal is enclosed in a sealed plastic housing that allows...
Read More »
Tonelight Annunciators Provide Audio/Visual Warning Signals
New Tonelight annunciators from Transducers USA emit both audible and LED warning signals. The annunciator is rated at 12 VDC and includes a siren that operates at 85dB. It uses flashing LED lights and an audible siren, which can be emitted simultaneously or seperately, to provide warning signals. It is ideal for environmental conditions with high levels of ambient noise.
Read More »
Electret Condenser Microphones feature solderless terminations.
Electret Condenser Microphones are offered in range from 34 to 57 dB. Operating at 2.0V to 4.5V and 150µA to 500 µA current, units are available in Omnidirectional (4.5 dia. x 3.0 ht. to 9.7 dia. x 6.5 ht.), Unidirectional (6.0 dia. x 2.7 ht. to 9.7 dia. x 6.5 ht.), Noise Cancelling (6.0 dia. X 2.7 ht. to 6.0 dia. X 1.8 ht.) and MEMS models. Microphones are used in applications from recording...
Read More »
Ultrasonic Sensors come in solid sealed aluminum housing.
Ultrasonic Sensors are suitable for material handling, food and beverage, fill level measurement or detection at gates and doorway applications. Units come in sealed epoxy potted construction and are IP 57 and IP67 rated. Products offer measurement rates from 25,000 Hz to 40,000 Hz and are compliant with RoHS, REACH and conflict minerals law. Sensors are used to determine whether a pallet is on...
Read More »
TRIP Series Audio Indicators are suitable for industrial applications.
TRIP Series audio indicators provide a range of noise alert applications, including dozens of models and part numbers, with electrical, mounting, frequency and tone options. Ideal for medical, security and safety applications, Internal Drive Circuit units feature a high-pitched alarm at 2700 to 4000 Hz with options for fast or slow pulsing. Used for industrial applications, Panel Mount indicators...
Read More »
Audio and Visual Alarm Unit provides major alert.
Featuring plastic, wall-mounted design measuring 7 x 2.8 in., Model TRIP-6692RLS provides both visual and/or audio alarm suitable for equipment and laboratory alert notifications of production- or procedural shut-downs as well as for process completion notices. LED strobe will operate to warn of any unsafe condition or intrusion, followed by high output of 102 dB SPL at frequency of 2.4–3.1...
Read More »
New Plastic Tonelight Indicators Delivers Both Audible and Visual Warning Signal
The TRIP-LB200P Plastic Tonelight Indicators are suitable for alarms, low-voltage, low-pressure, high-radiation, dangerous conditions and liquid detector applications. The products feature four-position terminal blocks-two for RED LED and two for AUDIO ALARM. The indicators are offered with lens in standard (red) and optional colors (green, yellow, orange, blue and white). They can be operated in...
Read More »
Transducer USA Launches New Audio Components for Use in Wet Applications
The Transducer’s Water-Resistant Input/Output Audio Components include microphones and audible indicators that are built to meet IP-57, IP-65 and/or IP-67 standards. The units are suitable for bilge pumps, sump pumps, marine instruments or other outdoor or indoor wet applications. The microphones offer an operating frequency range of 100 to 20 kHz with Signal-to-Noise ratio of 60 dBA. The...
Read More »
New Low Frequency Buzzer Features an Almost Infinite Life for Ceramic Piezo Audio Output
The new buzzer, TRIP-2612P(S), performs on a lower frequency, delivering 400 Hz at a minimum of 95dB with a standard of 12DC. It meets the NFPA code requirement and is RoHS compliant. The unit comes with a flame-retardant cover and an easy, stable PC board mount and connection.
Read More »
New Tonelight Security Alarm Features an Operating Frequency of 2.4 - 3.7 kHz
The TRIP-6692 Tonelight™ Security Alarm comes with dual notifiers – a red or green strobe light and a loud siren. The product is available in package of 5 x 3 x 1.5 in. that consists of a 2-wire lead and 3-wire lead. The alarm generates 100dB at 30 cm of wave siren output with its red strobe light. The device is rated to 12 VDC (voltage) and 300 mA (current) with a minimum sound pressure...
Read More »
Transducer Launches TRPI-2440L(G) Piezo Impact Switch That is Immune to Environmental Stresses and Conditions
The TRPI-2440L(G) Piezo Impact Switch is designed to identify pressure and changes in impact. The device features an output voltage of 40 mVp/G, capacitance of 12000 pF +30% and an insulation resistance of 100 MΩ Min. The switch can be operated in -20⁰C to +70⁰C temperature range and is offered in 24 mm diameter housing. The piezo crystal is enclosed in a sealed plastic housing that allows...
Read More »
Tonelight Annunciators Provide Audio/Visual Warning Signals
New Tonelight annunciators from Transducers USA emit both audible and LED warning signals. The annunciator is rated at 12 VDC and includes a siren that operates at 85dB. It uses flashing LED lights and an audible siren, which can be emitted simultaneously or seperately, to provide warning signals. It is ideal for environmental conditions with high levels of ambient noise.
Read More »
Electret Condenser Microphones feature solderless terminations.
Electret Condenser Microphones are offered in range from 34 to 57 dB. Operating at 2.0V to 4.5V and 150µA to 500 µA current, units are available in Omnidirectional (4.5 dia. x 3.0 ht. to 9.7 dia. x 6.5 ht.), Unidirectional (6.0 dia. x 2.7 ht. to 9.7 dia. x 6.5 ht.), Noise Cancelling (6.0 dia. X 2.7 ht. to 6.0 dia. X 1.8 ht.) and MEMS models. Microphones are used in applications from recording...
Read More »
Ultrasonic Sensors come in solid sealed aluminum housing.
Ultrasonic Sensors are suitable for material handling, food and beverage, fill level measurement or detection at gates and doorway applications. Units come in sealed epoxy potted construction and are IP 57 and IP67 rated. Products offer measurement rates from 25,000 Hz to 40,000 Hz and are compliant with RoHS, REACH and conflict minerals law. Sensors are used to determine whether a pallet is on...
Read More »
TRIP Series Audio Indicators are suitable for industrial applications.
TRIP Series audio indicators provide a range of noise alert applications, including dozens of models and part numbers, with electrical, mounting, frequency and tone options. Ideal for medical, security and safety applications, Internal Drive Circuit units feature a high-pitched alarm at 2700 to 4000 Hz with options for fast or slow pulsing. Used for industrial applications, Panel Mount indicators...
Read More »
Audio and Visual Alarm Unit provides major alert.
Featuring plastic, wall-mounted design measuring 7 x 2.8 in., Model TRIP-6692RLS provides both visual and/or audio alarm suitable for equipment and laboratory alert notifications of production- or procedural shut-downs as well as for process completion notices. LED strobe will operate to warn of any unsafe condition or intrusion, followed by high output of 102 dB SPL at frequency of 2.4–3.1...
Read More »