Torrey Pines Scientific, Inc.

Digital Stirring Hot Plate stores 10 programs in memory.

Digital Stirring Hot Plate stores 10 programs in memory.

With EchoTherm(TM) Model HS40, programming is done through front panel membrane switch and full-function LCD. Measuring 8 x 8 in., ceramic glass heater plates offer chemical resistance and can be heated from ambient to 450°C in less than 3 min. Plate surface or solution temperature can be controlled using PID control loop to 1°C of target, and accuracy is 1% of reading using platinum...

Read More »
Hot Plates and Stirrers offer digital controls.
HVAC

Hot Plates and Stirrers offer digital controls.

Measuring 10 x 7 x 4.5 in., Models HS20 Stirring Hot Plate, HP20 Hot Plate, and ST20 Stirrer feature heating surface constructed of solid white 6 x 6 in. ceramic glass. They withstand up to 30 lb by weight and offer temperature settings of 30-450Â-ºC, stirring ranges of 100-1,500 rpm, and 2 memory keys to store settings. Available in 100, 115 and 230 Vac with 3-wire ac line cord, units are...

Read More »
Benchtop Incubators offer fully programmable operation.
Health, Medical, & Dental Supplies and Equipment

Benchtop Incubators offer fully programmable operation.

Peltier-based Models 1N35 and 1N45 are chilling/heating incubators with no compressor or CFCs and temperature range from 4.0-70.0°C with control to 0.1°C. They have interior capacity of 27.5 and 55 l, respectively. Fully programmable controls are capable of storing 3 routines in memory. Each routine is capable of 10 steps and each program step is temperature, time, and ramp function....

Read More »
Dry Bath controls temperatures from -10 to +100°C.
Architectural & Civil Engineering Products

Dry Bath controls temperatures from -10 to +100°C.

EchoTherm(TM) Model IC20 can freeze, chill, or heat samples in assay plates, centrifuge tubes, vials, and test tubes. Peltier driven unit measures 6.5 x 8.75 x 3.5 in. and comes with chiller/heater module, UPS, and ac line cord. It provides digital display and control of temperature to 1°C; count down timer in days, hours, minutes and seconds to 30 days; data logger; and RS232 interface....

Read More »
Electronic Cooler chills samples at workstation.
Electronic Components & Devices

Electronic Cooler chills samples at workstation.

Designed as compact replacement for ice baths and chillers, IC10 Ice Cube measures 6.5 x 4.75 in. and uses aluminum sample blocks that accommodate most routine sample containers. Peltier driven unit works from bench-top UPS, which takes ac inputs from 95-265 Vac, 50/60 Hz and coverts them to 12 Vdc to operate unit. UL, CSA, and CE compliant, product chills to 30°C below ambient on its...

Read More »
Mini-Circulator suits small volume sample holders.
Communication Systems & Equipment

Mini-Circulator suits small volume sample holders.

EchoTherm(TM) Model CB20 Constant Temperature Chilling/Heating Mini-Circulator is Peltier-based for heating and chilling and requires no compressors or CFCs. Temperature range is 4.0-70.0°C, accurate to ±0.1°C. Settable in 1% increments, variable pumping range is 0-300 ml/min. Circulator includes transparent reservoir cover, 3/32 x 4 in. stainless steel platinum RTD probe, 3 ft...

Read More »
Rotating Mixer operates at speeds from 4-40 rpm.
Electronic Components & Devices

Rotating Mixer operates at speeds from 4-40 rpm.

Model RT10 is capable of mixing 50, 0.5 ml and 48, 1.5 ml centrifuge tubes with snap-on caps or screw down caps in end-over-end motion. Rotator operates from wall-mounted universal power supply, which provides 12 Vdc to unit. Speed control has off position fully counter-clockwise with 270° of rotation between off and full on. Sample holders are available for 16, 15 ml or 6, 50 ml centrifuge...

Read More »
Dry Baths provide temperatures from -10 to +100°C.
Architectural & Civil Engineering Products

Dry Baths provide temperatures from -10 to +100°C.

Suited for use with biological and other samples, EchoTherm(TM) SC20 Digital and SC25 Fully Programmable Dry Baths are Peltier driven. They offer control to 1°C; mix speeds from 200-1,000 rpm; and backlit, 2-line, alphanumeric display. Variable-speed orbital mixer allows for simultaneous mixing and controlling of sample temperatures. Features include 30-day count down timers with alarm and...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers