Viscom Inc.

Two Industry Awards for Viscom's High-Speed 3D AXI 7056-II at Nepcon China
Test & Measurement

Two Industry Awards for Viscom's High-Speed 3D AXI 7056-II at Nepcon China

Shanghai, April 2018 – Nepcon China – Viscom, a leading German manufacturer of high-quality inspection systems for the electronics industry, is very pleased to announce that their innovative high-speed 3D AXI inspection system X7056-II has been recognized with two significant industry awards at Nepcon China: the 2018 SMT China Vision Award and the EM Innovation Award. Both Awards have...

Read More »
Viscom's S3088 Ultra Gold Wins the NPI Award for Test & Inspection - AOI
Test & Measurement

Viscom's S3088 Ultra Gold Wins the NPI Award for Test & Inspection - AOI

Duluth, GA, February 2017 - Viscom announces that it has been awarded a 2017 NPI Award in the category of Test & Inspection - AOI for its 3D AOI system - S3088 ultra gold. The award was presented to the company during a Tuesday, Feb. 14, 2017 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO. The S3088 ultra gold reaches image data rates of up to 3.6 gigapixels...

Read More »
Test & Measurement

3D Inspection Systems from Viscom Inspect Complex Transmission Controls at WABCO

Duluth, GA – WABCO has successfully optimized production quality on its prototyping line with the S3088 SPI and S3088 ultra from Viscom. Viscom Quality Uplink manages the data networking for WABCO, which is known for its ABS systems. As part of an ongoing development partnership since 2014, WABCO has acquired a prototype line in stages at its Lindener Hafen location in Hanover, Germany. The...

Read More »
Cirtronics Installs Powerful 3D AOI Solution for Accurate Inspection Results
Machinery & Machining Tools

Cirtronics Installs Powerful 3D AOI Solution for Accurate Inspection Results

Duluth, GA, October 2016Â- - Viscom is pleased to announce that it has been selected by Cirtronics for its 3D AOI. Based in Milford, NH, Cirtronics has added an S3088 ultra blue AOI system to each of their production lines in its 175,000 sq. ft. manufacturing space. The Cirtronics team conducted extensive evaluations on the S3088 ultra blue and competitive systems and found the Viscom units...

Read More »
HighDensit Module From Viscom features high-power LEDs.
Optics & Photonics

HighDensit Module From Viscom features high-power LEDs.

In addition to standard camera equipment, Viscom’s HighDensity module is suitable for inspecting silicone or especially thin coatings in electronics production. Featuring LEDs attached around the camera, the ultraviolet light (black light) with special wavelengths extends the field of application of the S3088 CCI and provides optimum illumination even for weakly fluorescing coating types.

Read More »
Test & Measurement

Bosch Decides for AXI from Viscom

Hanover – Robert Bosch GmbH and Viscom AG continue their partnership in the automated X-ray inspection (AXI) area. Bosch's decision came after an intensive evaluation, during which Viscom impressed with the X7056 AXI. Viscom’s X7056 AXI is the focus of this agreement, and Bosch verifies the Viscom’s technical competence in this area: We trust the quality and inspection performance of...

Read More »
3D AOI System offers image data rate of 3.6 gigapixels/sec.
Test & Measurement

3D AOI System offers image data rate of 3.6 gigapixels/sec.

Based on XMplus 3D camera module with more than 120 megapixels, S3088 ultra gold features image field size of 50 x 50 mm and inspection speeds up to 65 cmÂ-²/s. System works with integrated structured light projector. Fields of view from up to 9 perspectives enable exact 3D analyses, with which lifted leads, chip coplanarity, and other critical defects are detected. Measuring 40 x 60 in.,...

Read More »
Speed Up Your AOI and X-ray Inspection with Viscom at APEX
Health, Medical, & Dental Supplies and Equipment

Speed Up Your AOI and X-ray Inspection with Viscom at APEX

Duluth, GA – Viscom announced today that it will exhibit in Booth #1763 at the 2016 IPC APEX EXPO, scheduled to take place March 15-17, 2016 at the Las Vegas Convention Center. Viscom’s applications experts will present the company’s new 3D AOI and X-ray developments. The world’s first and only combined in-line 3D AXI/3D AOI system For the first time in North America Viscom will unveil...

Read More »
Test & Measurement

Viscom's S3088 SPI Will Be Part of the NPL Solder Paste and Solder Joint Automatic Inspection Experience at SMTAI

Duluth, GA, – Viscom announced today that its S3088 SPI system will be featured in the SMTA International – National Physical Laboratory (NPL) Defect Database Live Solder Paste and Solder Joint Automatic Inspection Experience from Sept. 29-30, 2015 on the show floor. This year's special feature area will include live printing ultra-fine pitch deposits, 0201 and 01005 devices, inspection...

Read More »
3D AOI Systems accelerate defect detection.
Material Processing

3D AOI Systems accelerate defect detection.

Featuring Viscom XM camera module and vVision interface for intuitive program generation,Â- S3088 ultra delivers accurate inspection down to 03015. System provides complete fault coverage using 9 views plus 3D, offering height measurement of components up to 25 mm. S3088 Conformal Coating Inspection system, featuring 8M camera module equipped with UV LEDs, inspects...

Read More »
Two Industry Awards for Viscom's High-Speed 3D AXI 7056-II at Nepcon China
Test & Measurement

Two Industry Awards for Viscom's High-Speed 3D AXI 7056-II at Nepcon China

Shanghai, April 2018 – Nepcon China – Viscom, a leading German manufacturer of high-quality inspection systems for the electronics industry, is very pleased to announce that their innovative high-speed 3D AXI inspection system X7056-II has been recognized with two significant industry awards at Nepcon China: the 2018 SMT China Vision Award and the EM Innovation Award. Both Awards have...

Read More »
Company News

Viscom Listed in 2018 World Market Leader Index

Hanover, February 2018 – Viscom AG has just been listed as World Market Leader Champion 2018 in the World Market Leader Index (WMFI) of the University of St. Gallen and Academy of German World Market Leaders. Viscom's inclusion among the World Market Leader Champions of 2018 brings yet another confirmation of the innovative inspection solutions offered by the company that are in demand...

Read More »
Viscom's S3088 Ultra Gold Wins the NPI Award for Test & Inspection - AOI
Test & Measurement

Viscom's S3088 Ultra Gold Wins the NPI Award for Test & Inspection - AOI

Duluth, GA, February 2017 - Viscom announces that it has been awarded a 2017 NPI Award in the category of Test & Inspection - AOI for its 3D AOI system - S3088 ultra gold. The award was presented to the company during a Tuesday, Feb. 14, 2017 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO. The S3088 ultra gold reaches image data rates of up to 3.6 gigapixels...

Read More »
Test & Measurement

3D Inspection Systems from Viscom Inspect Complex Transmission Controls at WABCO

Duluth, GA – WABCO has successfully optimized production quality on its prototyping line with the S3088 SPI and S3088 ultra from Viscom. Viscom Quality Uplink manages the data networking for WABCO, which is known for its ABS systems. As part of an ongoing development partnership since 2014, WABCO has acquired a prototype line in stages at its Lindener Hafen location in Hanover, Germany. The...

Read More »
Cirtronics Installs Powerful 3D AOI Solution for Accurate Inspection Results
Machinery & Machining Tools

Cirtronics Installs Powerful 3D AOI Solution for Accurate Inspection Results

Duluth, GA, October 2016Â- - Viscom is pleased to announce that it has been selected by Cirtronics for its 3D AOI. Based in Milford, NH, Cirtronics has added an S3088 ultra blue AOI system to each of their production lines in its 175,000 sq. ft. manufacturing space. The Cirtronics team conducted extensive evaluations on the S3088 ultra blue and competitive systems and found the Viscom units...

Read More »
HighDensit Module From Viscom features high-power LEDs.
Optics & Photonics

HighDensit Module From Viscom features high-power LEDs.

In addition to standard camera equipment, Viscom’s HighDensity module is suitable for inspecting silicone or especially thin coatings in electronics production. Featuring LEDs attached around the camera, the ultraviolet light (black light) with special wavelengths extends the field of application of the S3088 CCI and provides optimum illumination even for weakly fluorescing coating types.

Read More »
Test & Measurement

Bosch Decides for AXI from Viscom

Hanover – Robert Bosch GmbH and Viscom AG continue their partnership in the automated X-ray inspection (AXI) area. Bosch's decision came after an intensive evaluation, during which Viscom impressed with the X7056 AXI. Viscom’s X7056 AXI is the focus of this agreement, and Bosch verifies the Viscom’s technical competence in this area: We trust the quality and inspection performance of...

Read More »
3D AOI System offers image data rate of 3.6 gigapixels/sec.
Test & Measurement

3D AOI System offers image data rate of 3.6 gigapixels/sec.

Based on XMplus 3D camera module with more than 120 megapixels, S3088 ultra gold features image field size of 50 x 50 mm and inspection speeds up to 65 cmÂ-²/s. System works with integrated structured light projector. Fields of view from up to 9 perspectives enable exact 3D analyses, with which lifted leads, chip coplanarity, and other critical defects are detected. Measuring 40 x 60 in.,...

Read More »
Speed Up Your AOI and X-ray Inspection with Viscom at APEX
Health, Medical, & Dental Supplies and Equipment

Speed Up Your AOI and X-ray Inspection with Viscom at APEX

Duluth, GA – Viscom announced today that it will exhibit in Booth #1763 at the 2016 IPC APEX EXPO, scheduled to take place March 15-17, 2016 at the Las Vegas Convention Center. Viscom’s applications experts will present the company’s new 3D AOI and X-ray developments. The world’s first and only combined in-line 3D AXI/3D AOI system For the first time in North America Viscom will unveil...

Read More »
Test & Measurement

Viscom's S3088 SPI Will Be Part of the NPL Solder Paste and Solder Joint Automatic Inspection Experience at SMTAI

Duluth, GA, – Viscom announced today that its S3088 SPI system will be featured in the SMTA International – National Physical Laboratory (NPL) Defect Database Live Solder Paste and Solder Joint Automatic Inspection Experience from Sept. 29-30, 2015 on the show floor. This year's special feature area will include live printing ultra-fine pitch deposits, 0201 and 01005 devices, inspection...

Read More »

All Topics