Doosan Industrial Vehicle America Corporation
Suite 400
Buford, GA 30518
Power-Packed DMV-3016L Vertical Machining Center
West Caldwell, NJ - Daewoo's DMV 3016L vertical machining center packs the power to take heavy cuts in tough materials, the precision to meet world-class standards, and the speed to finish tough jobs fast. Its massive, one-piece bed with box-type column is heavily ribbed, and preserves stability under rigorous cutting conditions. The fine-grain Meehanite construction dampens vibrations and helps...
Read More »
Puma MX Mills And Turns in a Single Setup
West Caldwell, NJ - The Puma MX series mill-turn adds true milling capabilities to a powerful Daewoo turning center. The new design provides unmatched flexibility within a complete spectrum of part geometries. From simple turning or milling to complex, simultaneous, multi-axis machining, complex parts can be produced on one machine in a single setup. The dual spindle, multi-tasking Puma MX is...
Read More »
Vertical Machining Center produces mirror finishes.
Featuring 1-piece bed and box-type column constructed from fine-grain Meehanite, DMV 6030 has 29.5 x 63 in. table with 3,300 lb load capacity, and provides X, Y, Z axis travels of 60 x 30 x 24.6 in. Center-mounted, double-pretensioned ball screws are supported on each end by angular contact thrust bearings. Design provides Ã-
Read More »
Twin-Turret Turning Center has programmable tailstock.
PUMA TL-series features upper and lower turrets and programmable tailstock for parts 9.4 in. dia x 23.6 in. long. While model TL2000 accepts 2.6 in. dia barstock, TL2500 accepts barstock of similar or 3.0 in. dia and 39.3 in. lengths. Both models are designed for interrupted cutting. Their dual turrets house 20 tools total, with live tooling at any station, and servo drives reduce...
Read More »
Horizontal Machining Center offers 14,000 rpm spindle speed.
With 30 hp motor generating 161 ft-lb torque for cutting metals, DHP-4000 combines 1.5 sec tool-to-tool changes, 2,362 ipm rapid traverses, and 2-pallet, rotary shuttle system with 5.9 sec pallet change time. Work pieces up to 23.6 in. dia x 31.5 in., weighing up to 880 lb., are supported on 15.7 x 15.7 in. pallets. Table can be indexed in 1Ã-
Read More »
Turning Center has tool setter with4-position touch sensor.
Offered in 3 models with 6.5 or 8.25 in. chuck, Lynx 220 OD Turning Center is powered by 20 hp motor and features 30Ã-
Read More »Tri-Wheel Trucks feature AC-powered systems.
PRO 5 Series of 3-wheel trucks, offered in 3,000, 3,500, and 4,000 lb capacities, utilize ac technology for drive, hydraulic, and steering systems. AC controller consists of main logic board and 3 independent power modules. To maintain equivalent operating speeds, Intelligent Torque Control closed-loop feedback system continuously monitors loads on traction and hydraulic motors. Trucks offer 5...
Read More »Doosan Streamlines Equipment Delivery Process
(SUWANEE, Ga. – January 2020) Doosan® equipment customers can receive their new, specifically configured machines faster in the United States and Canada thanks to a streamlined fulfillment process from Doosan Infracore North America, LLC. Whether a crawler excavator with narrow tracks or a wheel loader with a counterweight, Doosan machines could arrive four to six weeks after the order is...
Read More »Doosan Infracore Completes Acquisition of Bobcat, Utility Equipment and Attachments Businesses from Ingersoll Rand
SEOUL, KOREA, WEST FARGO, ND and CHARLOTTE, NC - November 30, 2007 - Doosan Infracore today announced that it has completed the acquisition of the Bobcat, Utility Equipment and Attachments businesses from Ingersoll Rand Company, Ltd. (NYSE: IR). Doosan said that the three entities will operate as individual businesses of Doosan Infracore International, a US-based subsidiary of Doosan Infracore,...
Read More »
Power-Packed DMV-3016L Vertical Machining Center
West Caldwell, NJ - Daewoo's DMV 3016L vertical machining center packs the power to take heavy cuts in tough materials, the precision to meet world-class standards, and the speed to finish tough jobs fast. Its massive, one-piece bed with box-type column is heavily ribbed, and preserves stability under rigorous cutting conditions. The fine-grain Meehanite construction dampens vibrations and helps...
Read More »
Puma MX Mills And Turns in a Single Setup
West Caldwell, NJ - The Puma MX series mill-turn adds true milling capabilities to a powerful Daewoo turning center. The new design provides unmatched flexibility within a complete spectrum of part geometries. From simple turning or milling to complex, simultaneous, multi-axis machining, complex parts can be produced on one machine in a single setup. The dual spindle, multi-tasking Puma MX is...
Read More »
Vertical Machining Center produces mirror finishes.
Featuring 1-piece bed and box-type column constructed from fine-grain Meehanite, DMV 6030 has 29.5 x 63 in. table with 3,300 lb load capacity, and provides X, Y, Z axis travels of 60 x 30 x 24.6 in. Center-mounted, double-pretensioned ball screws are supported on each end by angular contact thrust bearings. Design provides Ã-
Read More »
Horizontal Machining Center offers 14,000 rpm spindle speed.
With 30 hp motor generating 161 ft-lb torque for cutting metals, DHP-4000 combines 1.5 sec tool-to-tool changes, 2,362 ipm rapid traverses, and 2-pallet, rotary shuttle system with 5.9 sec pallet change time. Work pieces up to 23.6 in. dia x 31.5 in., weighing up to 880 lb., are supported on 15.7 x 15.7 in. pallets. Table can be indexed in 1Ã-
Read More »
Twin-Turret Turning Center has programmable tailstock.
PUMA TL-series features upper and lower turrets and programmable tailstock for parts 9.4 in. dia x 23.6 in. long. While model TL2000 accepts 2.6 in. dia barstock, TL2500 accepts barstock of similar or 3.0 in. dia and 39.3 in. lengths. Both models are designed for interrupted cutting. Their dual turrets house 20 tools total, with live tooling at any station, and servo drives reduce...
Read More »
Turning Center has tool setter with4-position touch sensor.
Offered in 3 models with 6.5 or 8.25 in. chuck, Lynx 220 OD Turning Center is powered by 20 hp motor and features 30Ã-
Read More »Tri-Wheel Trucks feature AC-powered systems.
PRO 5 Series of 3-wheel trucks, offered in 3,000, 3,500, and 4,000 lb capacities, utilize ac technology for drive, hydraulic, and steering systems. AC controller consists of main logic board and 3 independent power modules. To maintain equivalent operating speeds, Intelligent Torque Control closed-loop feedback system continuously monitors loads on traction and hydraulic motors. Trucks offer 5...
Read More »