Creform Corp.
Greer, SC 29651
Creform Launches New Workstation for Packaging in Manufacturing Production Cell
Features plastic surface across the front that can be used for assembly, packing or administrative paperwork. Allows the storage of shipping materials such as boxes, bags, tapes and labels above the work surface. Suitable for warehouse operations and manufacturing applications.
Read More »
Latest Flow Rack Comes with ESD Skatewheel Conveyor Rollers
Offered with four levels for product presentation that includes three lanes each with top level allowing empty container to be returned to service aisle. Built with ESD light gray and nickel plated metal joints as per the assembler’s anti-static requirement. Each rack measures 70 x 77 x 46 in. (Tall x Deep x Wide) and can hold up to 800 lb.
Read More »
New CRE-608 Lighted Workstation is Designed for Quality Inspection Applications
The CRE-608 Lighted Workstation is offered in 120 x 60 x 36 in. (L x W x T) dimensions with a distributed load capacity of 500 lb. The product comes with angle-braced structure and a half inch clear plastic. It has six 48 in. long LED lights mounted below the worksurface and can be placed on six 6 in. bolt-on casters. The lights of the workstation penetrate thru wood veneer for identifying...
Read More »
New Picking Cart is Designed to Hold Up to 350 lb
Creform’s Picking Cart is offered with special center module that is fabricated from corrugated plastic and features eight compartments for keeping multiple garment orders clean and separated. The cart comes in 18 x 38 x 54 in. (W x L x T) dimensions and four 4 in. diameter urethane casters. The unit features a handle on one end with an integrated work area with a lip around the edge ensure...
Read More »
Creform Donates AGVs to Alabama Industrial Training Center
Greer, SC—Creform Corporation, a manufacturer of unique products for the design and building of material handling structures and automated guided vehicles has donated two AGVs to the Alabama Industrial Development Training Center (AIDT). The two AGVs, CA-A50060-NSI-SL- BSTAGV, will be used in the lab of the training center facility to simulate manufacturing processes. The AGV system consists of...
Read More »
New CRE-605 Workstation Can Be Configured as Stand-Up or Sit-Down Station
The CRE-605 Workstation is designed for automotive part suppliers and built with 28 mm pipes and joints. The unit features flow lanes for first-in, first out parts handling in an assembly operation. It is offered in 60 x 80 x 64 in. (W x D x H) dimensions and has a load capacity of 600 lbs. The workstation features a plastic work surface that covers entire front of the station and the above work...
Read More »
Latest FH-C25100 AGV from Creform Features Powered Engage/Disengage to Raise/Lower Drive Wheels
The FH-C25100 AGV comes with custom designed cradle that features a locking pin and electrically-powered 100°rotation travel with three stop positions. The unit is fabricated with steel frame and is equipped with bolt-on drive unit. The AGC's each end follows peel and stick magnetic tape guidepath. It is offered with 2.5 x 1 m (L x W) custom frame and is operated by two 12V, 160AH, AGM...
Read More »
Mobile Computer Station features onboard batteries.
Equipped with plastic panels, Mobile Computer Station uses four large diameter swivel casters for rolling and positioning. Measuring 24 in. W x 61 in. H x 23 in. D dimensions, unit features pull-out drawer, sturdy table surface and inverter. Offering secure positioning, product is built with pipes and joints. Computer station comes with door at rear which provides service access and vents in side...
Read More »
One-Ton AGV Tugger comes with utility lock deck.
Equipped with 24-volt system powered by two 12-volt AGM batteries, One-Ton AGV Tugger can tow two carts. Featuring PLC with HMI interface on-board controls, 50 course, flash light, no- contact obstacle sensor, E-stops and 128 commands control, unit is made of heavy-duty steel base and top structure built with 28 mm pipe. With load capacity of 2200 lb, unit follows peel and stick magnetic tape...
Read More »
Get the Team on Board
Creform-built ‘communications center’ available as kitted or assembled structure Greer, SC - A simple idea to help communications within an organization…a white board. Now take the concept of the white board and allow a team of savvy engineers to help design it better and you have the Creform “Team Board.” Calling it a communications center is not a stretch. The Creform Team Board is...
Read More »