Progressive Epoxy Polymers, Inc.
Pittsfield, NH 03263
Clear Epoxy Encapsulant has pourable formulation.
Bio Clear 810(TM) is solvent free, clear epoxy used for object encapsulation (marine, electronic, and gift industries) as well as poured-on bar top and table top applications. Features include low exotherm kick, slow UV epoxy yellowing, and low viscosity, making it suited for poured applications between 1/4 and one inch thick. Bio Clear 810 has a 2:1 mix ratio.
Read More »
Clear Epoxy can be shaped and engraved with ordinary router.
Bio Clear 810(TM) is pourable bar- and table-top clear epoxy, which can be shaped, edged, and engraved with ordinary router once it has set and cured. Low viscosity epoxy is available in 1.5 quart, 3 quart, and 3 gal kits, each with mix ratio of 2:1.
Read More »
Progressive Epoxy Polymers Inc/May-2009
Pittsfield, NH - (05/10/2009) - Progressive Epoxy Polymers, Inc., an internet supplier of epoxy resins/coatings, fillers and thickeners for commercial, residential and marine use, is now offering two part polyurethane coatings (know as LPU - Linear Polyurethanes). Acrylic Poly UV Plus(TM) is a two part polyurethane clear coat available in gloss or satin. The product is unique in that it is...
Read More »
Pigment Additives for Epoxies
Pittsfield, NH - (10/13/08) - Progressive Epoxy Polymers, Inc., an internet supplier of epoxy resins/coatings, urethanes, fillers and thickeners for commercial, residential and marine use, announces the introduction of gel pigments for its coatings. One quart gel pigments are available in dark brown, tile red, white, black and bright yellow. One quart of pigment will color 1.5 to 3 gallons of...
Read More »Marine Epoxies cure in temperatures below 40
LTC 38 clear, solvent-free epoxy is suitable for repair and boat building. Epoxy, with mix ratio of 3:2, cures in 20 min @ 65-
Read More »Coating System provides zinc primer, epoxy, and urethane.
Moisture-cured urethane MC 104, with zinc-dust additive, cures by reacting with moisture in air. It is applicable in shop or field by spray or rolling. With high solids content (82%), CM 15 ivory-colored epoxy is suitable for spray applications. It offers some internal flex to allow for substrate expansion/contraction. Gloss white Acrylic Poly 2-part acrylic polyurethane topcoat offers high...
Read More »
Clear Epoxy Encapsulant has pourable formulation.
Bio Clear 810(TM) is solvent free, clear epoxy used for object encapsulation (marine, electronic, and gift industries) as well as poured-on bar top and table top applications. Features include low exotherm kick, slow UV epoxy yellowing, and low viscosity, making it suited for poured applications between 1/4 and one inch thick. Bio Clear 810 has a 2:1 mix ratio.
Read More »
Clear Epoxy can be shaped and engraved with ordinary router.
Bio Clear 810(TM) is pourable bar- and table-top clear epoxy, which can be shaped, edged, and engraved with ordinary router once it has set and cured. Low viscosity epoxy is available in 1.5 quart, 3 quart, and 3 gal kits, each with mix ratio of 2:1.
Read More »
Progressive Epoxy Polymers Inc/May-2009
Pittsfield, NH - (05/10/2009) - Progressive Epoxy Polymers, Inc., an internet supplier of epoxy resins/coatings, fillers and thickeners for commercial, residential and marine use, is now offering two part polyurethane coatings (know as LPU - Linear Polyurethanes). Acrylic Poly UV Plus(TM) is a two part polyurethane clear coat available in gloss or satin. The product is unique in that it is...
Read More »
Pigment Additives for Epoxies
Pittsfield, NH - (10/13/08) - Progressive Epoxy Polymers, Inc., an internet supplier of epoxy resins/coatings, urethanes, fillers and thickeners for commercial, residential and marine use, announces the introduction of gel pigments for its coatings. One quart gel pigments are available in dark brown, tile red, white, black and bright yellow. One quart of pigment will color 1.5 to 3 gallons of...
Read More »Marine Epoxies cure in temperatures below 40
LTC 38 clear, solvent-free epoxy is suitable for repair and boat building. Epoxy, with mix ratio of 3:2, cures in 20 min @ 65-
Read More »Coating System provides zinc primer, epoxy, and urethane.
Moisture-cured urethane MC 104, with zinc-dust additive, cures by reacting with moisture in air. It is applicable in shop or field by spray or rolling. With high solids content (82%), CM 15 ivory-colored epoxy is suitable for spray applications. It offers some internal flex to allow for substrate expansion/contraction. Gloss white Acrylic Poly 2-part acrylic polyurethane topcoat offers high...
Read More »