Thermal Dynamics
Chesterfield, MO 63017
Share:
Gas Flow Control is designed for use in plasma cutting.
Comprised of 3 independent modules, Automatic DFC-3000 (Digital Flow Control) functions as central manifold for all incoming gases in automated plasma cutting and works with 100, 200, and 300 A models of Ultra-Cut system. First module (TSC-3000) has touchscreen controller and USB port and saves programs for future use. Second module (DMC-3000) has 7 inputs and 5 outputs for gas use, while third...
Read More »
Torch Height Controller connects to CNC and plasma systems.
Equipped with high-contrast display, Model SC-3000 indicates torch height in distance and voltage. Built-in collision sensor retracts automatically, eliminating need for external sensor. With arc voltage range of 0-300 V, unit is ready for all applications from marking to cutting thick materials. To facilitate operation, operating parameters are limited to 2 drop-down menus on user interface.
Read More »
Thermal Dynamics Announces New XTR Robotic Torch
St. Louis, MO (February 3, 2009) - Thermal Dynamics, the leading producer of manual and automated plasma cutting systems, is pleased to announce the introduction of the new XTR Robotic Torch from Thermal Dynamics. This torch is specifically designed for use with the Thermal Dynamics Ultra-Cut 100/200/300 precision plasma cutting systems for robotic and bevel cutting applications. The sleek...
Read More »
Cutting Torch is offered in 90 degree model.
Available in 20 and 50 ft lengths, manual 1Torch utilizes 30 consumables that cover spectrum of manual plasma cutting/gouging in 20-120 A range. Features include O2-B and ATC connections and lead extensions that allow cutting at distances up to 100 ft from power supply. Designed as replacement torch, unit can be installed on most plasma systems, when combined with adapter.
Read More »
Plasma Cutting System includes pre-installed condenser.
Featuring portable design, Drag-GunÃ-® Plus offers maximum arc visibility for operator control and includes SureLokÃ-® torch, which provides Ã-½ in. genuine cut capacity. Built-in air compressor minimizes moisture content in air supply. Cutting system delivers full cut capacity at 230 V @ 15-35 A, which is continuously adjustable.
Read More »Plasma Cutting System provides dross-free cuts.
Auto-Cut 100 uses XT Torch Technology to promote cutting performance, while MaximumLife technology helps extend parts life and contributes to product's 100 A cut speed. Cutting system delivers precise cutting via use of XT-301 consumable parts cartridge system, which locates exact centerline of cut after process changes. For optimal cutting of stainless, aluminum, and non-ferrous materials,...
Read More »
Plasma Cutting System has lightweight, portable design.
Weighing 44 lb, FP-20A incorporates inverter power supply that links unit to primary voltage from 115-230 V, single-phase, 50 or 60 Hz. Unit comes equipped with SL60(TM) 1TorchÃ-®, which features trigger release and ergonomic handle. Able to cut through rusted, painted, or coated surfaces without prior surface preparation, product delivers clean cuts on various metals and provides genuine cut...
Read More »
Air Plasma Cutting System cuts metal up to 1 1/2 in. thick.
Rated at 100 A, inverter-based CUTMASTER(TM) 151 operates on single-phase or 3-phase input power. It includes ATC(TM) quick disconnect, automatic Tip Saver(TM) circuitry, and 1Torch(TM) plasma torch, which eliminates high frequency starting and provides dross-free cuts. Arc remains constant, even on expanded metal or grating and is strong enough to cut directly through paint and rust. Wraparound...
Read More »
Plasma Cutting Torch upgrades HD3070 plasma systems.
Model XT(TM)-300 provides high-precision cutting on Ã-½ in. metals including stainless steel, mild steel, aluminum, and non-ferrous material. Cuts have sharp edges with little or no dross, smooth cutting edge surface, and small heat-affected zone. Keyless consumables cartridge can be installed or changed without changing torch head. With a couple of twists, rapid engagement retaining collar...
Read More »
Dust Covers protect power supplies.
Designed for CUTMASTER(TM) and PakMasterÃ-® power supplies, dust covers are constructed of durable, heavyweight black nylon canvas. Available in 3 sizes, they are water resistant and feature large outer pocket for storing manuals or spare consumables. Adjustable draw cord ensures tight fit while reinforced and finished seams keep them strong and sealed.
Read More »
Gas Flow Control is designed for use in plasma cutting.
Comprised of 3 independent modules, Automatic DFC-3000 (Digital Flow Control) functions as central manifold for all incoming gases in automated plasma cutting and works with 100, 200, and 300 A models of Ultra-Cut system. First module (TSC-3000) has touchscreen controller and USB port and saves programs for future use. Second module (DMC-3000) has 7 inputs and 5 outputs for gas use, while third...
Read More »
Torch Height Controller connects to CNC and plasma systems.
Equipped with high-contrast display, Model SC-3000 indicates torch height in distance and voltage. Built-in collision sensor retracts automatically, eliminating need for external sensor. With arc voltage range of 0-300 V, unit is ready for all applications from marking to cutting thick materials. To facilitate operation, operating parameters are limited to 2 drop-down menus on user interface.
Read More »
Thermal Dynamics Announces New XTR Robotic Torch
St. Louis, MO (February 3, 2009) - Thermal Dynamics, the leading producer of manual and automated plasma cutting systems, is pleased to announce the introduction of the new XTR Robotic Torch from Thermal Dynamics. This torch is specifically designed for use with the Thermal Dynamics Ultra-Cut 100/200/300 precision plasma cutting systems for robotic and bevel cutting applications. The sleek...
Read More »
Cutting Torch is offered in 90 degree model.
Available in 20 and 50 ft lengths, manual 1Torch utilizes 30 consumables that cover spectrum of manual plasma cutting/gouging in 20-120 A range. Features include O2-B and ATC connections and lead extensions that allow cutting at distances up to 100 ft from power supply. Designed as replacement torch, unit can be installed on most plasma systems, when combined with adapter.
Read More »
Plasma Cutting System includes pre-installed condenser.
Featuring portable design, Drag-GunÃ-® Plus offers maximum arc visibility for operator control and includes SureLokÃ-® torch, which provides Ã-½ in. genuine cut capacity. Built-in air compressor minimizes moisture content in air supply. Cutting system delivers full cut capacity at 230 V @ 15-35 A, which is continuously adjustable.
Read More »Plasma Cutting System provides dross-free cuts.
Auto-Cut 100 uses XT Torch Technology to promote cutting performance, while MaximumLife technology helps extend parts life and contributes to product's 100 A cut speed. Cutting system delivers precise cutting via use of XT-301 consumable parts cartridge system, which locates exact centerline of cut after process changes. For optimal cutting of stainless, aluminum, and non-ferrous materials,...
Read More »
Plasma Cutting System has lightweight, portable design.
Weighing 44 lb, FP-20A incorporates inverter power supply that links unit to primary voltage from 115-230 V, single-phase, 50 or 60 Hz. Unit comes equipped with SL60(TM) 1TorchÃ-®, which features trigger release and ergonomic handle. Able to cut through rusted, painted, or coated surfaces without prior surface preparation, product delivers clean cuts on various metals and provides genuine cut...
Read More »
Air Plasma Cutting System cuts metal up to 1 1/2 in. thick.
Rated at 100 A, inverter-based CUTMASTER(TM) 151 operates on single-phase or 3-phase input power. It includes ATC(TM) quick disconnect, automatic Tip Saver(TM) circuitry, and 1Torch(TM) plasma torch, which eliminates high frequency starting and provides dross-free cuts. Arc remains constant, even on expanded metal or grating and is strong enough to cut directly through paint and rust. Wraparound...
Read More »
Plasma Cutting Torch upgrades HD3070 plasma systems.
Model XT(TM)-300 provides high-precision cutting on Ã-½ in. metals including stainless steel, mild steel, aluminum, and non-ferrous material. Cuts have sharp edges with little or no dross, smooth cutting edge surface, and small heat-affected zone. Keyless consumables cartridge can be installed or changed without changing torch head. With a couple of twists, rapid engagement retaining collar...
Read More »
Dust Covers protect power supplies.
Designed for CUTMASTER(TM) and PakMasterÃ-® power supplies, dust covers are constructed of durable, heavyweight black nylon canvas. Available in 3 sizes, they are water resistant and feature large outer pocket for storing manuals or spare consumables. Adjustable draw cord ensures tight fit while reinforced and finished seams keep them strong and sealed.
Read More »