Huntingdon Fusion Techniques

New PurgEye® 1000 Weld Purge Monitor Measures Oxygen Levels from 1,000 ppm down to 1 ppm
Communication Systems & Equipment

New PurgEye® 1000 Weld Purge Monitor Measures Oxygen Levels from 1,000 ppm down to 1 ppm

PurgEye® 1000 Weld Purge Monitor is designed to monitor oxygen levels in the welding zone via Weld Purge Monitor® screen that can be 10, 50 or even 1,000 m away from the weld. Unit features a sensing head fitted on to Mechanical or Inflatable Tube from 25 mm diameter upwards. The system is suitable for welding metals such as stainless steels, duplex steels, titanium and zirconium.

Read More »
Inflatable Rubber Plugs are Inflated Using Compressed Air Lines
Mechanical Components and Assemblies

Inflatable Rubber Plugs are Inflated Using Compressed Air Lines

Inflatable Rubber Plugs are offered in sizes ranging from 2 – 78 in. Resistant to oils, hydrocarbons and petrochemicals, these plugs are made from the rubber comprising the mix of styrene, butadiene and isoprene. The plugs are used for blocking of pipes, joints, channels and inlets and are suitable for fluid production (milk, beer, chemicals), petrochemical, pharmaceutical, gas pipeline...

Read More »
PurgElite® Purging Systems feature IntaCal® purge gas feed device.
Packaging Products & Equipment

PurgElite® Purging Systems feature IntaCal® purge gas feed device.

PurgElite® Tube and Pipe Purging Systems are designed for pipe diameters from 25 to 600 mm with inflatable bag on both sides of the spinal tube. IntaCal comes with centrepiece glow positioning indicator RootGlo® for accurate positioning of the system. PurgElite comes with heat resistant cover, connect/disconnect fittings and O’ ring seals. System features PurgeGate® valve for gas flow and...

Read More »
PurgEye® 200 Weld Purge Monitor allows networking to a range of accessories.
Packaging Products & Equipment

PurgEye® 200 Weld Purge Monitor allows networking to a range of accessories.

PurgEye® 200 Weld Purge Monitor comes with an OLED display, pre-settable audio alarms and integral electro-mechanical pump and can be operated on rechargeable batteries or mains power. The monitor’s PurgeNet™ enables the monitor to connect range of accessories such as orbital welder or automatic welding machine. Unit offers an accuracy of up to 10 ppm and is rated to IP65 standards. This...

Read More »
Low Cost Nylon Weld Purge Plugs™
Mechanical Components and Assemblies

Low Cost Nylon Weld Purge Plugs™

It is important when welding stainless steel and titanium tube and pipe joints to produce zero colour, oxide-free welds both on the inside and outside, although it is not always easy to weld purge stubs, elbows and tees. For welding nickel alloy, titanium and stainless steel tubes and pipes, including stubs, elbows and tees, Huntingdon Fusion Techniques HFT® have designed and developed...

Read More »
Heavy-Duty Leak Testing, Sealing and Stopping with Pipestoppers®
Mechanical Components and Assemblies

Heavy-Duty Leak Testing, Sealing and Stopping with Pipestoppers®

Blocking pipes for heavy-duty leak testing, sealing and stopping is easy with Steel Plugs from Huntingdon Fusion Techniques HFT®’s Pipestoppers® Division. HFT Pipestoppers® Steel Test Plugs can be used for low pressure testing and plugging pipes, pipelines and pipework fabrications and other orifices between 2 and 48” (50 to 1,200 mm) diameter. Ron Sewell, Chairman for HFT® said: “The...

Read More »
Low Cost Weld Purge Monitor® for Stainless Steel Welding
Packaging Products & Equipment

Low Cost Weld Purge Monitor® for Stainless Steel Welding

Measuring the oxygen level before, during and after welding stainless steel is crucial to achieve oxide free, zero colour welds. During stainless steel welding, the oxygen content must be purged down to a level as low as 100 ppm. The low cost, hand held, battery operated PurgEye® 100, designed and developed by Huntingdon Fusion Techniques HFT® is perfect for welding stainless steel, reading...

Read More »
Weld Purge Dams for Dished Ends and Short Pipes
Packaging Products & Equipment

Weld Purge Dams for Dished Ends and Short Pipes

Weld Purging (back purging) describes the removal of oxygen from the vicinity of a weld before, during and after welding. For pipe and tank welding of stainless steels, titanium and chrome steels, it is good practice to restrict the area required to be purged, usually with an inflatable tandem weld purging system. For the purging of short pipe pieces and dished end or dome end welds however, the...

Read More »
Bright, Shiny, Oxide-Free Welds with PurgExtra®
Packaging Products & Equipment

Bright, Shiny, Oxide-Free Welds with PurgExtra®

Tubes and pipes made from titanium, stainless steel, chrome/nickel steels are mostly required to be welded in a non-oxidised environment in order to achieve a metallurgically correct, zero colour weld. Best results are obtained by reducing the volume to be purged, with an inflatable Weld Purging System. Leading the way in Weld Purging Technology, Huntingdon Fusion Techniques HFT® have developed...

Read More »
Weld Backing Tape® Saves Grinding Time and Costs
Adhesives & Sealants

Weld Backing Tape® Saves Grinding Time and Costs

When the undersides of welds are ragged and uneven, they often need grinding to smooth them out. This costs labour time and money for grinding materials. The use of Argweld® fiberglass Backing Tape® can save these costs by leaving a smooth fully penetrating, clean weld that needs no further work. Weld Purging Experts Huntingdon Fusion Techniques HFT® have a range of four Backing Tapes® to...

Read More »

All Topics