Haimer-USA

Safe as Well as Efficient
Machinery & Machining Tools

Safe as Well as Efficient

The HAIMER Safe-Lock™ pull out protection system is becoming the industry standard. The HAIMER Safe-Lock™ pull out protection system ensures safe cutting tool clamping. Special drive keys in the tool holder perfectly match the spiral shaped grooves on the cutting tool shank, thus creating frictional clamping forces and a positive locking form-fit. This effectively prevents the cutting tool...

Read More »
Heavy Duty Machining - but Safe
Architectural & Civil Engineering Products

Heavy Duty Machining - but Safe

The importance of the tool holder is still understated, especially when it comes to roughing and heavy duty machining. Metal removal rates in these types of processes are absolutely crucial for the productivity of the machining operation. By using special shrink fit chucks with drive pins and spiral grooves in the tool shank it is now possible to perform high-feed full slotting of up to 2 x D (50...

Read More »
Architectural & Civil Engineering Products

MAPAL Relies on the Safe-Lock(TM) System from HAIMER

Igenhausen - Within a wide range of markets, such as the aerospace industry, cutting tools from MAPAL have successfully established themselves for high-performance machining operations like trochoidal milling. In order to offer users even greater protection against tools being pulled out of the chuck during machining operations, and to prevent damaging single workpieces or the machine itself,...

Read More »
Quality Down to the Finest Detail in the Area of Blisk and Turbine Blade Machining
Agricultural & Farming Products

Quality Down to the Finest Detail in the Area of Blisk and Turbine Blade Machining

Haimer shrinking technology enriches Starrag machining centers with precision. In order to machine engine components such as turbine blades and blisks, the aerospace industry has been relying on the quality provided by Starrag Machining Centers for a very long time. Almost no other machine supplier understands the requirements in such detail as Starrag does and can offer turnkey solutions...

Read More »
Strategic Partnership and Licensing Agreement between Two Market Leaders: OSG Cutting Tools with the HAIMER Safe-Lock(TM) System
Architectural & Civil Engineering Products

Strategic Partnership and Licensing Agreement between Two Market Leaders: OSG Cutting Tools with the HAIMER Safe-Lock(TM) System

In April 2015 the OSG Corporation, a world leader in round cutting tools, and Haimer GmbH, market leader in tool holding technology, signed a strategic partnership and licensing agreement. The OSG-Group is bringing their round endmill cutting tools to the global market now with the HAIMER Safe-Lock™-System. The OSG-Group, Japanese market leader for solid carbide endmills, has begun offering...

Read More »
Solid Carbide Endmills offer fine balance and 5 ìm run-out.
Laboratory and Research Supplies and Equipment

Solid Carbide Endmills offer fine balance and 5 ìm run-out.

Made from fine grain carbide, Power Mill PVD-coated endmills come in 2–20 mm cutting diameters and with 3, 4, and 5 cutting edges. Safe-Lock™ pull out protection system is available starting from 6 mm shank diameter, and all shanks are based on h5 tolerance. Cutting edge solutions include sharp, chamfer, and radius, and roughing geometry with cord profile is also available. For chatter-free,...

Read More »
Top Quality Tool Holding
Architectural & Civil Engineering Products

Top Quality Tool Holding

HAIMER, German market leader and international leader in tool holding, will be presenting the latest developments in the sector of high-precision tool holders and practical shrink and balancing machines at the IMTS 2010 in Chicago. On request Haimer as a system partner will now even take over the complete design of working stations or tool rooms used for the tool clamping and presetting. Taking...

Read More »
Haimer USA Uses New Demonstration Vehicle to Bring Technology to Prospective Customers
Architectural & Civil Engineering Products

Haimer USA Uses New Demonstration Vehicle to Bring Technology to Prospective Customers

VILLA PARK, IL - An old proverb says you can't bring the mountain to Mohammed," but Haimer USA is bringing its mountain of shrink-fit tool holders, tool balancing and other technology to its prospective customers via its new technology demonstration vehicle. Mounted on the chassis of a GMC Top Kick C4500 diesel is a 6-by-10-foot traveling showcase that features the latest shrink-fit tool holders,...

Read More »
Torque Wrench delivers precise, safe clamping.
Portable Tools

Torque Wrench delivers precise, safe clamping.

Clamping all standard ER collet chucks, exactly and without shear force, is accomplished via 2-arm construction, which avoids any damage by pulling and pushing simultaneously. This, in turn, improves runout and limits damages to small collets due to excessive clamping efforts. Users can tighten locknut exactly and with correct torque via dial gauge, which reads tool diameters from 1-4 mm. Scale...

Read More »
Advanced Equipment from Haimer USA Helps York Technical College Students Learn
Architectural & Civil Engineering Products

Advanced Equipment from Haimer USA Helps York Technical College Students Learn

ROCK HILL, S.C. - The Institute for Manufacturing Productivity at York Technical College, in its effort to stay on the cutting edge of production technology, turns to equipment from Haimer USA, which in turn gives students - and those already working in the manufacturing industry who receive training at York - exposure to processes that can make them and their employers more successful. York...

Read More »
Company News

Partnership Between Boeing Portland and Haimer Intensifies with Collaborative Membership at OMIC R&D

Brings total OMIC R&D partners to 20 at its Scappoose, Oregon facility The partnership between The Boeing Company and HAIMER Group will be strategically expanded to a joint membership at the OMIC R&D institution. On the picture William Gerry, Program Manager Global Technology for Boeing Research and Technology (left) and Andreas Haimer, President HAIMER Group (on the right), at the official...

Read More »
Safe as Well as Efficient
Machinery & Machining Tools

Safe as Well as Efficient

The HAIMER Safe-Lock™ pull out protection system is becoming the industry standard. The HAIMER Safe-Lock™ pull out protection system ensures safe cutting tool clamping. Special drive keys in the tool holder perfectly match the spiral shaped grooves on the cutting tool shank, thus creating frictional clamping forces and a positive locking form-fit. This effectively prevents the cutting tool...

Read More »
Heavy Duty Machining - but Safe
Architectural & Civil Engineering Products

Heavy Duty Machining - but Safe

The importance of the tool holder is still understated, especially when it comes to roughing and heavy duty machining. Metal removal rates in these types of processes are absolutely crucial for the productivity of the machining operation. By using special shrink fit chucks with drive pins and spiral grooves in the tool shank it is now possible to perform high-feed full slotting of up to 2 x D (50...

Read More »
Architectural & Civil Engineering Products

MAPAL Relies on the Safe-Lock(TM) System from HAIMER

Igenhausen - Within a wide range of markets, such as the aerospace industry, cutting tools from MAPAL have successfully established themselves for high-performance machining operations like trochoidal milling. In order to offer users even greater protection against tools being pulled out of the chuck during machining operations, and to prevent damaging single workpieces or the machine itself,...

Read More »
Quality Down to the Finest Detail in the Area of Blisk and Turbine Blade Machining
Agricultural & Farming Products

Quality Down to the Finest Detail in the Area of Blisk and Turbine Blade Machining

Haimer shrinking technology enriches Starrag machining centers with precision. In order to machine engine components such as turbine blades and blisks, the aerospace industry has been relying on the quality provided by Starrag Machining Centers for a very long time. Almost no other machine supplier understands the requirements in such detail as Starrag does and can offer turnkey solutions...

Read More »
Strategic Partnership and Licensing Agreement between Two Market Leaders: OSG Cutting Tools with the HAIMER Safe-Lock(TM) System
Architectural & Civil Engineering Products

Strategic Partnership and Licensing Agreement between Two Market Leaders: OSG Cutting Tools with the HAIMER Safe-Lock(TM) System

In April 2015 the OSG Corporation, a world leader in round cutting tools, and Haimer GmbH, market leader in tool holding technology, signed a strategic partnership and licensing agreement. The OSG-Group is bringing their round endmill cutting tools to the global market now with the HAIMER Safe-Lock™-System. The OSG-Group, Japanese market leader for solid carbide endmills, has begun offering...

Read More »
Solid Carbide Endmills offer fine balance and 5 ìm run-out.
Laboratory and Research Supplies and Equipment

Solid Carbide Endmills offer fine balance and 5 ìm run-out.

Made from fine grain carbide, Power Mill PVD-coated endmills come in 2–20 mm cutting diameters and with 3, 4, and 5 cutting edges. Safe-Lock™ pull out protection system is available starting from 6 mm shank diameter, and all shanks are based on h5 tolerance. Cutting edge solutions include sharp, chamfer, and radius, and roughing geometry with cord profile is also available. For chatter-free,...

Read More »
Top Quality Tool Holding
Architectural & Civil Engineering Products

Top Quality Tool Holding

HAIMER, German market leader and international leader in tool holding, will be presenting the latest developments in the sector of high-precision tool holders and practical shrink and balancing machines at the IMTS 2010 in Chicago. On request Haimer as a system partner will now even take over the complete design of working stations or tool rooms used for the tool clamping and presetting. Taking...

Read More »
Company News

Haimer USA Triples Size of its Chicago-Area Headquarters

VILLA PARK, IL - In response to a dramatic increase in North American business, Haimer USA has expanded its facility in Villa Park, IL from 5,000 square feet to 15,000 square feet. As our business in North America has increased, we needed to add both to our staff and to our inventory," says Haimer USA President Brendt Holden. "This required more space for offices for our employees and warehouse...

Read More »
Haimer USA Uses New Demonstration Vehicle to Bring Technology to Prospective Customers
Architectural & Civil Engineering Products

Haimer USA Uses New Demonstration Vehicle to Bring Technology to Prospective Customers

VILLA PARK, IL - An old proverb says you can't bring the mountain to Mohammed," but Haimer USA is bringing its mountain of shrink-fit tool holders, tool balancing and other technology to its prospective customers via its new technology demonstration vehicle. Mounted on the chassis of a GMC Top Kick C4500 diesel is a 6-by-10-foot traveling showcase that features the latest shrink-fit tool holders,...

Read More »

All Topics