Chemline

New Chemline 2265 ARO Overcoat Uses Proprietary Polymer Technology
Non-Industrial Products

New Chemline 2265 ARO Overcoat Uses Proprietary Polymer Technology

The Chemline 2265 ARO Overcoat offers impenetrable membrane that acts as sacrificial second layer. The product is formulated without abrasive fillers and has a highly-compatible bond. The overcoat is applied at final thickness of >60 mils to form an ultra-durable and resistant outer shell. It is formulated to minimize the overspray fog in the application area and without plasticizers, tar, or...

Read More »
New Chemline 2265 ARO Overcoat Uses Proprietary Polymer Technology
Non-Industrial Products

New Chemline 2265 ARO Overcoat Uses Proprietary Polymer Technology

The Chemline 2265 ARO Overcoat offers impenetrable membrane that acts as sacrificial second layer. The product is formulated without abrasive fillers and has a highly-compatible bond. The overcoat is applied at final thickness of >60 mils to form an ultra-durable and resistant outer shell. It is formulated to minimize the overspray fog in the application area and without plasticizers, tar, or...

Read More »
Chemline 2265 is Third Party Certified to Meet/Exceed All AWWA C222-08 Requirements
Paints & Coatings

Chemline 2265 is Third Party Certified to Meet/Exceed All AWWA C222-08 Requirements

St. Louis, MO – Chemline, Inc., specifically formulated CHEMLINE 2265 as an interior lining and an exterior coating for large diameter transmission lines of potable water, waste water, and raw water. The formulation adheres extremely well directly to steel and requires no primer. CHEMLINE 2265 adds long-term corrosion protection to steel substrates in even the most demanding environments. It...

Read More »
Chemline 2265 is Third Party Certified to Meet/Exceed All AWWA C222-08 Requirements
Paints & Coatings

Chemline 2265 is Third Party Certified to Meet/Exceed All AWWA C222-08 Requirements

St. Louis, MO – Chemline, Inc., specifically formulated CHEMLINE 2265 as an interior lining and an exterior coating for large diameter transmission lines of potable water, waste water, and raw water. The formulation adheres extremely well directly to steel and requires no primer. CHEMLINE 2265 adds long-term corrosion protection to steel substrates in even the most demanding environments. It...

Read More »
CHEMLINE ARC Polyurea Coating offers tensile strength of 3850 psi.
Paints & Coatings

CHEMLINE ARC Polyurea Coating offers tensile strength of 3850 psi.

CHEMLINE ARC Polyurea Coating is suitable for secondary containment for oil and gas, wastewater basins, parking garages, foundations and water ponds applications. This two-component unit offers resistance against corrosion and chemicals. Product provides taber abrasion of 17.0 mg loss and tears resistance/DIE-C of 570 pli. Coating meets ANSI/NSF 61 standards and can be applied using heated plural...

Read More »
CHEMLINE ARC Polyurea Coating offers tensile strength of 3850 psi.
Paints & Coatings

CHEMLINE ARC Polyurea Coating offers tensile strength of 3850 psi.

CHEMLINE ARC Polyurea Coating is suitable for secondary containment for oil and gas, wastewater basins, parking garages, foundations and water ponds applications. This two-component unit offers resistance against corrosion and chemicals. Product provides taber abrasion of 17.0 mg loss and tears resistance/DIE-C of 570 pli. Coating meets ANSI/NSF 61 standards and can be applied using heated plural...

Read More »
Chemline 7850 Polyurethane Resin meets ASTME-84 Class 1 standard.
Adhesives & Sealants

Chemline 7850 Polyurethane Resin meets ASTME-84 Class 1 standard.

Chemline 7850 Polyurethane Resin offers hardness of shore 95 A, tear strength of 240 pli and elongation of 100 %. Unit allows user to create large sheets of artificial bark, brick work or rock wall. Product is suitable for Graco Reactor E-XP2 or H-XP2 equipment and is applied 1:1 high pressure. Resin is ideal for amusement parks, zoos, museums, casinos and point of purchase display applications.

Read More »
Chemline 7850 Polyurethane Resin meets ASTME-84 Class 1 standard.
Adhesives & Sealants

Chemline 7850 Polyurethane Resin meets ASTME-84 Class 1 standard.

Chemline 7850 Polyurethane Resin offers hardness of shore 95 A, tear strength of 240 pli and elongation of 100 %. Unit allows user to create large sheets of artificial bark, brick work or rock wall. Product is suitable for Graco Reactor E-XP2 or H-XP2 equipment and is applied 1:1 high pressure. Resin is ideal for amusement parks, zoos, museums, casinos and point of purchase display applications.

Read More »
New Chemline 2265 ARO Overcoat Uses Proprietary Polymer Technology
Non-Industrial Products

New Chemline 2265 ARO Overcoat Uses Proprietary Polymer Technology

The Chemline 2265 ARO Overcoat offers impenetrable membrane that acts as sacrificial second layer. The product is formulated without abrasive fillers and has a highly-compatible bond. The overcoat is applied at final thickness of >60 mils to form an ultra-durable and resistant outer shell. It is formulated to minimize the overspray fog in the application area and without plasticizers, tar, or...

Read More »
New Chemline 2265 ARO Overcoat Uses Proprietary Polymer Technology
Non-Industrial Products

New Chemline 2265 ARO Overcoat Uses Proprietary Polymer Technology

The Chemline 2265 ARO Overcoat offers impenetrable membrane that acts as sacrificial second layer. The product is formulated without abrasive fillers and has a highly-compatible bond. The overcoat is applied at final thickness of >60 mils to form an ultra-durable and resistant outer shell. It is formulated to minimize the overspray fog in the application area and without plasticizers, tar, or...

Read More »
Chemline 2265 is Third Party Certified to Meet/Exceed All AWWA C222-08 Requirements
Paints & Coatings

Chemline 2265 is Third Party Certified to Meet/Exceed All AWWA C222-08 Requirements

St. Louis, MO – Chemline, Inc., specifically formulated CHEMLINE 2265 as an interior lining and an exterior coating for large diameter transmission lines of potable water, waste water, and raw water. The formulation adheres extremely well directly to steel and requires no primer. CHEMLINE 2265 adds long-term corrosion protection to steel substrates in even the most demanding environments. It...

Read More »
Chemline 2265 is Third Party Certified to Meet/Exceed All AWWA C222-08 Requirements
Paints & Coatings

Chemline 2265 is Third Party Certified to Meet/Exceed All AWWA C222-08 Requirements

St. Louis, MO – Chemline, Inc., specifically formulated CHEMLINE 2265 as an interior lining and an exterior coating for large diameter transmission lines of potable water, waste water, and raw water. The formulation adheres extremely well directly to steel and requires no primer. CHEMLINE 2265 adds long-term corrosion protection to steel substrates in even the most demanding environments. It...

Read More »
CHEMLINE ARC Polyurea Coating offers tensile strength of 3850 psi.
Paints & Coatings

CHEMLINE ARC Polyurea Coating offers tensile strength of 3850 psi.

CHEMLINE ARC Polyurea Coating is suitable for secondary containment for oil and gas, wastewater basins, parking garages, foundations and water ponds applications. This two-component unit offers resistance against corrosion and chemicals. Product provides taber abrasion of 17.0 mg loss and tears resistance/DIE-C of 570 pli. Coating meets ANSI/NSF 61 standards and can be applied using heated plural...

Read More »
CHEMLINE ARC Polyurea Coating offers tensile strength of 3850 psi.
Paints & Coatings

CHEMLINE ARC Polyurea Coating offers tensile strength of 3850 psi.

CHEMLINE ARC Polyurea Coating is suitable for secondary containment for oil and gas, wastewater basins, parking garages, foundations and water ponds applications. This two-component unit offers resistance against corrosion and chemicals. Product provides taber abrasion of 17.0 mg loss and tears resistance/DIE-C of 570 pli. Coating meets ANSI/NSF 61 standards and can be applied using heated plural...

Read More »
Chemline 7850 Polyurethane Resin meets ASTME-84 Class 1 standard.
Adhesives & Sealants

Chemline 7850 Polyurethane Resin meets ASTME-84 Class 1 standard.

Chemline 7850 Polyurethane Resin offers hardness of shore 95 A, tear strength of 240 pli and elongation of 100 %. Unit allows user to create large sheets of artificial bark, brick work or rock wall. Product is suitable for Graco Reactor E-XP2 or H-XP2 equipment and is applied 1:1 high pressure. Resin is ideal for amusement parks, zoos, museums, casinos and point of purchase display applications.

Read More »
Chemline 7850 Polyurethane Resin meets ASTME-84 Class 1 standard.
Adhesives & Sealants

Chemline 7850 Polyurethane Resin meets ASTME-84 Class 1 standard.

Chemline 7850 Polyurethane Resin offers hardness of shore 95 A, tear strength of 240 pli and elongation of 100 %. Unit allows user to create large sheets of artificial bark, brick work or rock wall. Product is suitable for Graco Reactor E-XP2 or H-XP2 equipment and is applied 1:1 high pressure. Resin is ideal for amusement parks, zoos, museums, casinos and point of purchase display applications.

Read More »

All Topics