ESD Electronics, Inc.

Gateway converts from CAN into Ethernet.
Communication Systems & Equipment

Gateway converts from CAN into Ethernet.

Featuring NET +50 ARM processor that controls data transfer between CAN and Ethernet, EtherCAN allows multiple networks to be linked over long distances. EtherCAN comes with ELLSI programming package, 10 Mbit/s and 100 Mbit/s Ethernet interface, CAN interface, CANopen Manager, and driver to enable PCs to access multiple sites for diagnostic or monitoring purposes. Using integral web server, users...

Read More »
Gateway converts CAN into Ethernet.
Communication Systems & Equipment

Gateway converts CAN into Ethernet.

EtherCAN features +50 ARM processor that controls data transfer between CAN and Ethernet, allowing multiple networks to be linked over long distances. It features 10/100 Mbps Ethernet and CAN interface, ELLSI programming package, CANopen Manager, and driver enabling PCs to access multiple CAN sites for diagnostic or monitoring purposes. Protocols include TCP/IP and Modbus/TCP; and gateway is able...

Read More »
VME Carrier Board allows VME users to run PMC cards.
Architectural & Civil Engineering Products

VME Carrier Board allows VME users to run PMC cards.

Using UNIVERSE CA912042 VME-PCI bridge for VMEbus connection, PMC-CADDY can operate as slave or master on VMEbus, and can carry up to 2 PMC modules of normal size or 1 double-sized module. Board operates with data width of up to 32 bits, with 32 address signals on VMEbus. VMEbus interrupt can be applied to any of 7 interrupt-request lines. Every plug-in unit of PMC-CADDY has I/O connector, which...

Read More »
CANopen Starter Kit offers educational motion control tool.
Agricultural & Farming Products

CANopen Starter Kit offers educational motion control tool.

CAN-STEPCON (CANopen) starter kit enables PC users to gain experience with CANopen motion control in stepper motor applications. It contains CANopen stepper motor controller, CAN-STEPCON-1H; I/O wiring; 100-240 Vac/47-62 Hz power supply; and CAN network. Included CAN-USB-Mini interface module, with bit rate up to 1 Mbps, acts as CANopen Manager, while CAN-STEPCON-1H acts as slave. Provided with...

Read More »
Embedded Controllers suit industrial automation applications.
Agricultural & Farming Products

Embedded Controllers suit industrial automation applications.

Power PC Model EPPC-405 incorporates IBM PPC405GP, 32-bit processor with 200 or 266 MHz, enabling performance up to 375 MIPS. It supports IEC61131-3 programming as well as LINUX, RTLinux, QNX, vxWorks, and RTOS operating systems. Unit features Ethernet interface, 1 or 2 electrically isolated CAN interfaces and controllers, and one or two RS-232 serial interfaces. Model EPPC-405-UC offers 2 USB...

Read More »
Company News

Meet the CEO of CAN in Automation (CiA) in the Boston Area

Holger Zeltwanger, CEO of CiA (CAN in Automation), will be the keynote speaker at the upcoming, free CAN - CANopen Seminar on September 16, 2008 at the Warren Conference Center near Boston, MA. Wilfried Voss, President of esd electronics, Inc is very pleased to announce that Holger Zeltwanger, CEO of CiA (CAN in Automation), will be the keynote speaker at the upcoming, free CAN - CANopen Seminar...

Read More »
Gateway converts from CAN into Ethernet.
Communication Systems & Equipment

Gateway converts from CAN into Ethernet.

Featuring NET +50 ARM processor that controls data transfer between CAN and Ethernet, EtherCAN allows multiple networks to be linked over long distances. EtherCAN comes with ELLSI programming package, 10 Mbit/s and 100 Mbit/s Ethernet interface, CAN interface, CANopen Manager, and driver to enable PCs to access multiple sites for diagnostic or monitoring purposes. Using integral web server, users...

Read More »
Gateway converts CAN into Ethernet.
Communication Systems & Equipment

Gateway converts CAN into Ethernet.

EtherCAN features +50 ARM processor that controls data transfer between CAN and Ethernet, allowing multiple networks to be linked over long distances. It features 10/100 Mbps Ethernet and CAN interface, ELLSI programming package, CANopen Manager, and driver enabling PCs to access multiple CAN sites for diagnostic or monitoring purposes. Protocols include TCP/IP and Modbus/TCP; and gateway is able...

Read More »
VME Carrier Board allows VME users to run PMC cards.
Architectural & Civil Engineering Products

VME Carrier Board allows VME users to run PMC cards.

Using UNIVERSE CA912042 VME-PCI bridge for VMEbus connection, PMC-CADDY can operate as slave or master on VMEbus, and can carry up to 2 PMC modules of normal size or 1 double-sized module. Board operates with data width of up to 32 bits, with 32 address signals on VMEbus. VMEbus interrupt can be applied to any of 7 interrupt-request lines. Every plug-in unit of PMC-CADDY has I/O connector, which...

Read More »
Company News

New Guide to Controller Area Network (CAN) Technology

January 6, 2006 - A Comprehensible Guide to Controller Area Network, by Wilfred Voss, has recently been published by Copperhill Technologies Corporation, Amherst, MA. This book is the most thoroughly researched and most complete work on Controller Area Network (CAN) technology available today. CAN, a serial network technology that was originally designed for the automotive industry, is now a...

Read More »
CANopen Starter Kit offers educational motion control tool.
Agricultural & Farming Products

CANopen Starter Kit offers educational motion control tool.

CAN-STEPCON (CANopen) starter kit enables PC users to gain experience with CANopen motion control in stepper motor applications. It contains CANopen stepper motor controller, CAN-STEPCON-1H; I/O wiring; 100-240 Vac/47-62 Hz power supply; and CAN network. Included CAN-USB-Mini interface module, with bit rate up to 1 Mbps, acts as CANopen Manager, while CAN-STEPCON-1H acts as slave. Provided with...

Read More »
Embedded Controllers suit industrial automation applications.
Agricultural & Farming Products

Embedded Controllers suit industrial automation applications.

Power PC Model EPPC-405 incorporates IBM PPC405GP, 32-bit processor with 200 or 266 MHz, enabling performance up to 375 MIPS. It supports IEC61131-3 programming as well as LINUX, RTLinux, QNX, vxWorks, and RTOS operating systems. Unit features Ethernet interface, 1 or 2 electrically isolated CAN interfaces and controllers, and one or two RS-232 serial interfaces. Model EPPC-405-UC offers 2 USB...

Read More »

All Topics