MaxLite, Inc

MaxLite HighMax(TM) High Bay Fixtures Illuminate Beach Mold and Tool Manufacturing Plant
Architectural & Civil Engineering Products

MaxLite HighMax(TM) High Bay Fixtures Illuminate Beach Mold and Tool Manufacturing Plant

New Albany, Indiana - For more than 30 years, Beach Mold and Tool has produced injection molds, using high quality tooling while processing engineering resins in those molds. After building and processing thousands of injection molds with hundreds of different engineering resins, Beach Mold and Tool developed the highest quality large and small precision products found in business electronics,...

Read More »
MaxLite Adds LED Flat Panels and Area Lights to Expanding Roster of DesignLights(TM) Consortium-Certified Products
Architectural & Civil Engineering Products

MaxLite Adds LED Flat Panels and Area Lights to Expanding Roster of DesignLights(TM) Consortium-Certified Products

West Caldwell, New Jersey - Building on its reputation as an innovative provider of energy efficient lighting for indoor and outdoor applications, MaxLite® introduces new DesignLights(TM) Consortium (DLC) approved LED Flat Panels and Area Lights for commercial markets, which join MaxLite's extensive list of DLC-approved LED indoor and outdoor luminaires that qualify for utility rebates...

Read More »
LED Linear T8 Lamp replaces 4 ft fluorescent tubes.
Architectural & Civil Engineering Products

LED Linear T8 Lamp replaces 4 ft fluorescent tubes.

Consuming 20 W while powered by 1- or 2-lamp per driver configuration, LED Linear F32T8 Replacement Lamp has L70 life of 50,000 hours, or more than 17 years operating for 8 hours/day. Non-dimmable unit comes in correlated color temperature of 4,100 K with output of 1,550 lumens. Back of housing is aluminum heat sink that promotes transfer of heat from LED chips. With power factor of more than...

Read More »
Three MaxLite LED Lamps Qualify for the Lighting Design Lab's LED Products List
Electrical Equipment & Systems

Three MaxLite LED Lamps Qualify for the Lighting Design Lab's LED Products List

West Caldwell, New Jersey - MaxLite®, a leading global manufacturer and marketer of the award-winning MaxLED® line of innovative LED luminaires and lamps, announces that three LED lamps are now listed on the Lighting Design Lab's (LDL) interim qualified products list. Being listed ensures that MaxLite's 7.5-watt A19, 6-watt dimmable PAR20 and 12-watt dimmable PAR30 will qualify for...

Read More »
DLC-Approved LED Area Lights replace metal halide fixtures.
Architectural & Civil Engineering Products

DLC-Approved LED Area Lights replace metal halide fixtures.

Operating with universal driver on electrical systems ranging from 120-277 V, LED Area Lights come in 70, 100, and 140 W models delivering 4,141, 6,963, and 8,400 lumens, respectively. All fixtures are available in 5,000 K correlated color temperature and offer full cutoff classification in Type V distribution. Compatible with mechanical relay type photo cells and occupancy sensors, LED Area...

Read More »
Low-Profile LED Lamps promote application versatility.
Architectural & Civil Engineering Products

Low-Profile LED Lamps promote application versatility.

Fully dimmable (down to 10%) 17 W LED lamps, Pancake and Eclipse, come in 100° and 90° beam angles for general lighting applications. Available in standard E26 Edison screw-in and GU24 pin bases, 5 in. dia Eclipse comes in 2.8 in. (GU24) and 3.8 in. (E26) lengths. Pancake, with same diameter, comes in 2.6 in. (GU24) and 3.25 in. (E26) lengths. Both are constructed with solid aluminum body...

Read More »
Recessed LED Luminaire offers alternative to fluorescents.
Architectural & Civil Engineering Products

Recessed LED Luminaire offers alternative to fluorescents.

Emitting 90% of light in downward 60° beam angle, ECO-T(TM) LED Recessed Troffer is designed for installation into T-bar grid ceilings and comes in 2 x 2 ft and 2 x 4 ft sizes respectively rated at 45 and 55 W. CRI is 84, and available CCTs are 3500K, 4100K, and 5000K. The 45 W model replaces typical 2U32 fluorescent fixture and exceeds 3,700 lm, and the 55 W model replaces 4 F32T8/28W...

Read More »
Low-Profile, Dimmable, 16 W LED Lamps replace 75 W incandescents.
Architectural & Civil Engineering Products

Low-Profile, Dimmable, 16 W LED Lamps replace 75 W incandescents.

At 5 in. dia x 3 in. long, Pancake PAR40 LED Lamp has 160° beam angle and is suited for general lighting. Eclipse PAR40 LED Lamp, at 5.25 in. dia x 4.75 in. long, has 45° beam angle and is suited for spot lighting. Constructed with solid aluminum body, lamps produce 1,000 lm and are available with E26 Edison screw-in or GU24 pin bases and 3000K, 4000K, and 5000K color temperatures....

Read More »
Outdoor LED Fixtures are intended for retail applications.
Architectural & Civil Engineering Products

Outdoor LED Fixtures are intended for retail applications.

Flood, security, garage, and canopy lights, designed for outdoor applications in smaller spaces, operate on 120-277 V electrical systems and are available with CCT of 5000K. These maintenance-free LED fixtures, which are ETL, cETL, and FCC certified as well as RoHS compliant, have 50,000 hr life at L70 standards. All fixtures are manufactured with high-ranked binning of LM-80 rated LEDs for color...

Read More »
MaxLite Adds LED Parking Garage Canopy Luminaires to Growing List of DesignLights Consortium-Certified Products
Architectural & Civil Engineering Products

MaxLite Adds LED Parking Garage Canopy Luminaires to Growing List of DesignLights Consortium-Certified Products

West Caldwell, New Jersey - Expanding on its reputation as a leading global manufacturer and marketer of innovative LED luminaires and lamps, MaxLite® announces that its 70-watt LED Surface Mounted Parking Garage Canopy Luminaires joins the 40-watt version on the DesignLights(TM) Consortium (DLC) Qualified Products List (QPL). The DLC was established to ensure that high quality, energy...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers