Alazartech Inc.

Digitizer provides 720 MB/sec data throughput to PC memory.
Computer Hardware & Peripherals

Digitizer provides 720 MB/sec data throughput to PC memory.

Model ATS9462®, 4-lane PCIe waveform digitizer offers 2 simultaneous analog inputs that can each be sampled at rates up to 180 MS/sec, providing signal-to-noise ratio in excess of 73 dB. Device uses FPGA-based PHY to interface to PCIe bus, which is also used for control and data processing. Data generated by 2 on-board A/D converters is streamed across PCIe bus for storage in PC memory or...

Read More »
PCI Waveform Digitizer features 125 MS/s sampling rate.
Computer Hardware & Peripherals

PCI Waveform Digitizer features 125 MS/s sampling rate.

Occupying one half-length PCI slot, 16-bit Model ATS660® uses FPGA-based digital electronics for control and data processing. It offers 2 simultaneous analog inputs that can each be sampled at rates up to 125 MS/s, providing signal-to-noise ratio in excess of 73 dB. Each channel can have up to 128 Megasamples of on-board acquisition memory buffer. Dual Port Acquisition Memory allows...

Read More »
Digitizers integrate pre- and post-trigger capability.
Architectural & Civil Engineering Products

Digitizers integrate pre- and post-trigger capability.

Dual-channel Models ATS1250 and ATS1220 are 12-bit PCI waveform digitizers for ultrasonic imaging and inspection, shock and vibration, and scientific applications. ADC and ASoPC technologies provide 60 dB signal-to-noise ratio. Units provide independently programmable inputs from ±20 mV to ±20 V, ac/dc coupling, 50 W/1 MW impedance on each channel, and 128,000 points of acquisition...

Read More »
Waveform Digitizer offers 50 MS/s sampling.
Computer Hardware & Peripherals

Waveform Digitizer offers 50 MS/s sampling.

PCI-based, Model ATS850 provides 8-bit, 50 MS/s sampling on 2 simultaneous channels with fully programmable front-end and trigger circuitry. Input ranges are independently programmable from ±20 mV to ±20 V. Unit includes AC/DC coupling, 50 W/1 MW impedance on each of 2 channels, and 256 K points of acquisition memory per channel. Multiple Record mode allows pre- and post-trigger...

Read More »
Digitizer provides 720 MB/sec data throughput to PC memory.
Computer Hardware & Peripherals

Digitizer provides 720 MB/sec data throughput to PC memory.

Model ATS9462®, 4-lane PCIe waveform digitizer offers 2 simultaneous analog inputs that can each be sampled at rates up to 180 MS/sec, providing signal-to-noise ratio in excess of 73 dB. Device uses FPGA-based PHY to interface to PCIe bus, which is also used for control and data processing. Data generated by 2 on-board A/D converters is streamed across PCIe bus for storage in PC memory or...

Read More »
PCI Waveform Digitizer features 125 MS/s sampling rate.
Computer Hardware & Peripherals

PCI Waveform Digitizer features 125 MS/s sampling rate.

Occupying one half-length PCI slot, 16-bit Model ATS660® uses FPGA-based digital electronics for control and data processing. It offers 2 simultaneous analog inputs that can each be sampled at rates up to 125 MS/s, providing signal-to-noise ratio in excess of 73 dB. Each channel can have up to 128 Megasamples of on-board acquisition memory buffer. Dual Port Acquisition Memory allows...

Read More »
Digitizers integrate pre- and post-trigger capability.
Architectural & Civil Engineering Products

Digitizers integrate pre- and post-trigger capability.

Dual-channel Models ATS1250 and ATS1220 are 12-bit PCI waveform digitizers for ultrasonic imaging and inspection, shock and vibration, and scientific applications. ADC and ASoPC technologies provide 60 dB signal-to-noise ratio. Units provide independently programmable inputs from ±20 mV to ±20 V, ac/dc coupling, 50 W/1 MW impedance on each channel, and 128,000 points of acquisition...

Read More »
Waveform Digitizer offers 50 MS/s sampling.
Computer Hardware & Peripherals

Waveform Digitizer offers 50 MS/s sampling.

PCI-based, Model ATS850 provides 8-bit, 50 MS/s sampling on 2 simultaneous channels with fully programmable front-end and trigger circuitry. Input ranges are independently programmable from ±20 mV to ±20 V. Unit includes AC/DC coupling, 50 W/1 MW impedance on each of 2 channels, and 256 K points of acquisition memory per channel. Multiple Record mode allows pre- and post-trigger...

Read More »

All Topics