Saelig Company Inc

1908 and 1908P Digital Multimeters provide up to 0.01Hz resolution.
Test & Measurement

1908 and 1908P Digital Multimeters provide up to 0.01Hz resolution.

Suitable for signals from 10Hz to 120kHz, 1908 and 1908P Digital Multimeters enable frequency, capacitance, and temperature measurements. Providing built-in data logging, even in remote locations, devices offer USB interface for remote control and read-back. With RS232, GPIB, and LXI-compliant LAN interfaces in 1908P, units include internal rechargeable batteries for 'use anywhere' versatility...

Read More »
1908 and 1908P Digital Multimeters provide up to 0.01Hz resolution.
Test & Measurement

1908 and 1908P Digital Multimeters provide up to 0.01Hz resolution.

Suitable for signals from 10Hz to 120kHz, 1908 and 1908P Digital Multimeters enable frequency, capacitance, and temperature measurements. Providing built-in data logging, even in remote locations, devices offer USB interface for remote control and read-back. With RS232, GPIB, and LXI-compliant LAN interfaces in 1908P, units include internal rechargeable batteries for 'use anywhere' versatility...

Read More »
EQXO-2000BM Crystal Oscillators feature tight frequency calibration tolerance.
Electronic Components & Devices

EQXO-2000BM Crystal Oscillators feature tight frequency calibration tolerance.

Designed for standard 5.0 VDC supply voltage and standard output is CMOS, 50 pF/10 TTL loads, EQXO-2000BM Crystal Oscillators are available in frequency ranging from 30 kHz to 70 MHz with a calibration tolerance of ±10 to ±25 ppm at 25°C. Offering frequency stability of ±100 or ±50 ppm over the full military temperature range (-55 to +125°C), units are ideal for upper atmosphere, aerospace,...

Read More »
EQXO-2000BM Crystal Oscillators feature tight frequency calibration tolerance.
Electronic Components & Devices

EQXO-2000BM Crystal Oscillators feature tight frequency calibration tolerance.

Designed for standard 5.0 VDC supply voltage and standard output is CMOS, 50 pF/10 TTL loads, EQXO-2000BM Crystal Oscillators are available in frequency ranging from 30 kHz to 70 MHz with a calibration tolerance of ±10 to ±25 ppm at 25°C. Offering frequency stability of ±100 or ±50 ppm over the full military temperature range (-55 to +125°C), units are ideal for upper atmosphere, aerospace,...

Read More »
ORT 230/240 optical rotary Torque Transducer offers lifetime warranty.
Sensors, Monitors & Transducers

ORT 230/240 optical rotary Torque Transducer offers lifetime warranty.

Available in two models ORT 230 and ORT 240, TorqSense ORT 230/240 Series of Optical Rotary Torque Transducer measures rotary and static torque up to 100Nm with bandwidth up to 50kHz. Measuring low torque and high bandwidth, device offers shafts of 0.5deg and 0.25deg maximum torsion deflection on smaller and larger transducers respectively. Applications include food and chemical mixing, engine or...

Read More »
ORT 230/240 optical rotary Torque Transducer offers lifetime warranty.
Sensors, Monitors & Transducers

ORT 230/240 optical rotary Torque Transducer offers lifetime warranty.

Available in two models ORT 230 and ORT 240, TorqSense ORT 230/240 Series of Optical Rotary Torque Transducer measures rotary and static torque up to 100Nm with bandwidth up to 50kHz. Measuring low torque and high bandwidth, device offers shafts of 0.5deg and 0.25deg maximum torsion deflection on smaller and larger transducers respectively. Applications include food and chemical mixing, engine or...

Read More »
PicoConnect 900 Series Test Probes offer interchangeable probe heads.
Fluid & Gas Flow Equipment

PicoConnect 900 Series Test Probes offer interchangeable probe heads.

With less than 0.4pF tip capacitance and- ground-referred loading of 220 to 910 ohms, 900 Series Microwave/Gigabit Passive Test Probes can test broadband signals or data streams up to 9GHz or 18Gb/s, including USB 2 & 3, HDMI 1 & 2, Ethernet, PCIe, SATA and LVDS standards. Suitable for use with any measuring instrument with 50 ohm inputs, PicoConnect offer probe division ratios of ÷5, ÷10...

Read More »
PicoConnect 900 Series Test Probes offer interchangeable probe heads.
Fluid & Gas Flow Equipment

PicoConnect 900 Series Test Probes offer interchangeable probe heads.

With less than 0.4pF tip capacitance and- ground-referred loading of 220 to 910 ohms, 900 Series Microwave/Gigabit Passive Test Probes can test broadband signals or data streams up to 9GHz or 18Gb/s, including USB 2 & 3, HDMI 1 & 2, Ethernet, PCIe, SATA and LVDS standards. Suitable for use with any measuring instrument with 50 ohm inputs, PicoConnect offer probe division ratios of ÷5, ÷10...

Read More »
Isolated USB to RS232/485 Coverter Cables tested 100% to 1500V AC RMS.
Construction Equipment and Supplies

Isolated USB to RS232/485 Coverter Cables tested 100% to 1500V AC RMS.

Suitable for computers which do not have a serial port, or where an extra serial port is required, USB-232-K and USB-485-K- cables provide USB to Serial conversion. 39 cables come with software drivers, supporting Windows 98, WinXP, Vista, Win7, Win8, and Win10 (3 and 64 bit). Addition of DB-9-to-XLR cable to USB-485-K enables professional audio controlling and transmition of signals at 115...

Read More »
Isolated USB to RS232/485 Coverter Cables tested 100% to 1500V AC RMS.
Construction Equipment and Supplies

Isolated USB to RS232/485 Coverter Cables tested 100% to 1500V AC RMS.

Suitable for computers which do not have a serial port, or where an extra serial port is required, USB-232-K and USB-485-K- cables provide USB to Serial conversion. 39 cables come with software drivers, supporting Windows 98, WinXP, Vista, Win7, Win8, and Win10 (3 and 64 bit). Addition of DB-9-to-XLR cable to USB-485-K enables professional audio controlling and transmition of signals at 115...

Read More »

All Topics