Atlas Copco CMT USA, Inc.

Heavy-Duty Rock Drills suit face drilling applications.
Agricultural & Farming Products

Heavy-Duty Rock Drills suit face drilling applications.

Intended for face drilling in underground mining and tunnelling projects involving tough conditions, COP 1638HD/1838HD/2238HD feature side bolt design, consisting of 4 front bolts and 2 at rear, that minimizes risk of impact piston mis-alignment and secondary damages to internal parts. Series COP 1800HD has hole range of 38-64 mm, and all products incorporate strengthened front head that...

Read More »
Heavy-Duty Rock Drills suit face drilling applications.
Agricultural & Farming Products

Heavy-Duty Rock Drills suit face drilling applications.

Intended for face drilling in underground mining and tunnelling projects involving tough conditions, COP 1638HD/1838HD/2238HD feature side bolt design, consisting of 4 front bolts and 2 at rear, that minimizes risk of impact piston mis-alignment and secondary damages to internal parts. Series COP 1800HD has hole range of 38-64 mm, and all products incorporate strengthened front head that...

Read More »
Material Processing

Nut Runner meets high-torque assembly line demands.

The trend towards lean assembly to reduce rework and warranty costs, the increasing number of critical joints and the closer attention to operator safety and ergonomics are typical challenges on today's high torque assembly lines. The new Tensor Revo nutrunner from Atlas Copco was specifically designed to meet these challenges. It's light - even the most powerful Tensor Revo, the ETP ST10,...

Read More »
Material Processing

Nut Runner meets high-torque assembly line demands.

The trend towards lean assembly to reduce rework and warranty costs, the increasing number of critical joints and the closer attention to operator safety and ergonomics are typical challenges on today's high torque assembly lines. The new Tensor Revo nutrunner from Atlas Copco was specifically designed to meet these challenges. It's light - even the most powerful Tensor Revo, the ETP ST10,...

Read More »
Containerized Portable Compressor targets oil and gas industry.
Fluid & Gas Flow Equipment

Containerized Portable Compressor targets oil and gas industry.

Featuring 1,020 cfm capacity at 150 psi, ZoneAir XATS 1020 utilizes 175-gal stainless steel fuel tank for 8 hr of operation at full load. Compressor is driven by Cummins QSM 11 Tier 3 compliant engine with flameproof Pyroban components. Housed in 15 ft DNV container, system also includes Pyroban's 3GP proactive gas detection system, which eliminates need for exhaust flame arrestors. Fully ATEX...

Read More »
Containerized Portable Compressor targets oil and gas industry.
Fluid & Gas Flow Equipment

Containerized Portable Compressor targets oil and gas industry.

Featuring 1,020 cfm capacity at 150 psi, ZoneAir XATS 1020 utilizes 175-gal stainless steel fuel tank for 8 hr of operation at full load. Compressor is driven by Cummins QSM 11 Tier 3 compliant engine with flameproof Pyroban components. Housed in 15 ft DNV container, system also includes Pyroban's 3GP proactive gas detection system, which eliminates need for exhaust flame arrestors. Fully ATEX...

Read More »
Portable Generators accommodate indoor/outdoor applications.
Agricultural & Farming Products

Portable Generators accommodate indoor/outdoor applications.

With all controls and connections accessible via front panel, 2010 generation LP 18 power packs come in petrol- or diesel-driven versions ranging from 9-18 hp and electric versions from 5-11 kW. Top cover protects engine well and can be opened to reach hydraulic parts as well as air and oil filters when change-out is required, while frame, wheels, and foldable handles facilitate transport. All...

Read More »
Portable Generators accommodate indoor/outdoor applications.
Agricultural & Farming Products

Portable Generators accommodate indoor/outdoor applications.

With all controls and connections accessible via front panel, 2010 generation LP 18 power packs come in petrol- or diesel-driven versions ranging from 9-18 hp and electric versions from 5-11 kW. Top cover protects engine well and can be opened to reach hydraulic parts as well as air and oil filters when change-out is required, while frame, wheels, and foldable handles facilitate transport. All...

Read More »
Heavy-Duty Rock Drills suit face drilling applications.
Agricultural & Farming Products

Heavy-Duty Rock Drills suit face drilling applications.

Intended for face drilling in underground mining and tunnelling projects involving tough conditions, COP 1638HD/1838HD/2238HD feature side bolt design, consisting of 4 front bolts and 2 at rear, that minimizes risk of impact piston mis-alignment and secondary damages to internal parts. Series COP 1800HD has hole range of 38-64 mm, and all products incorporate strengthened front head that...

Read More »
Heavy-Duty Rock Drills suit face drilling applications.
Agricultural & Farming Products

Heavy-Duty Rock Drills suit face drilling applications.

Intended for face drilling in underground mining and tunnelling projects involving tough conditions, COP 1638HD/1838HD/2238HD feature side bolt design, consisting of 4 front bolts and 2 at rear, that minimizes risk of impact piston mis-alignment and secondary damages to internal parts. Series COP 1800HD has hole range of 38-64 mm, and all products incorporate strengthened front head that...

Read More »
Material Processing

Nut Runner meets high-torque assembly line demands.

The trend towards lean assembly to reduce rework and warranty costs, the increasing number of critical joints and the closer attention to operator safety and ergonomics are typical challenges on today's high torque assembly lines. The new Tensor Revo nutrunner from Atlas Copco was specifically designed to meet these challenges. It's light - even the most powerful Tensor Revo, the ETP ST10,...

Read More »
Material Processing

Nut Runner meets high-torque assembly line demands.

The trend towards lean assembly to reduce rework and warranty costs, the increasing number of critical joints and the closer attention to operator safety and ergonomics are typical challenges on today's high torque assembly lines. The new Tensor Revo nutrunner from Atlas Copco was specifically designed to meet these challenges. It's light - even the most powerful Tensor Revo, the ETP ST10,...

Read More »
Containerized Portable Compressor targets oil and gas industry.
Fluid & Gas Flow Equipment

Containerized Portable Compressor targets oil and gas industry.

Featuring 1,020 cfm capacity at 150 psi, ZoneAir XATS 1020 utilizes 175-gal stainless steel fuel tank for 8 hr of operation at full load. Compressor is driven by Cummins QSM 11 Tier 3 compliant engine with flameproof Pyroban components. Housed in 15 ft DNV container, system also includes Pyroban's 3GP proactive gas detection system, which eliminates need for exhaust flame arrestors. Fully ATEX...

Read More »
Containerized Portable Compressor targets oil and gas industry.
Fluid & Gas Flow Equipment

Containerized Portable Compressor targets oil and gas industry.

Featuring 1,020 cfm capacity at 150 psi, ZoneAir XATS 1020 utilizes 175-gal stainless steel fuel tank for 8 hr of operation at full load. Compressor is driven by Cummins QSM 11 Tier 3 compliant engine with flameproof Pyroban components. Housed in 15 ft DNV container, system also includes Pyroban's 3GP proactive gas detection system, which eliminates need for exhaust flame arrestors. Fully ATEX...

Read More »
Portable Generators accommodate indoor/outdoor applications.
Agricultural & Farming Products

Portable Generators accommodate indoor/outdoor applications.

With all controls and connections accessible via front panel, 2010 generation LP 18 power packs come in petrol- or diesel-driven versions ranging from 9-18 hp and electric versions from 5-11 kW. Top cover protects engine well and can be opened to reach hydraulic parts as well as air and oil filters when change-out is required, while frame, wheels, and foldable handles facilitate transport. All...

Read More »
Portable Generators accommodate indoor/outdoor applications.
Agricultural & Farming Products

Portable Generators accommodate indoor/outdoor applications.

With all controls and connections accessible via front panel, 2010 generation LP 18 power packs come in petrol- or diesel-driven versions ranging from 9-18 hp and electric versions from 5-11 kW. Top cover protects engine well and can be opened to reach hydraulic parts as well as air and oil filters when change-out is required, while frame, wheels, and foldable handles facilitate transport. All...

Read More »

All Topics