Binder-USA, LP
Camarillo, CA 93012
Screw Clamp Power Connectors accept large wires.
Suited for industrial environments, Series 713 M12 Connectors with 4 and 5 pins can be terminated with 16 AWG wires and max cable diameter of 10 mm. Both male and female versions are available in straight form and can conduct currents up to 8 A/contact. Series 820 7/8 in. Connectors with 5 pins can be terminated with 14 AWG wires and max cable diameter of 14 mm. Available in male and female...
Read More »T-Shaped Splitter is designed for DeviceNet applications.
Used with Series 870 7/8 in. connectors in industrial automation environments, T-splitter helps connect several devices for power supply or bus connection. Connectors feature female to male and female connection with option of 4, 5, or 6 gold-plated contacts. Connection is sealed to IP-67 rating when properly mated and is immune to vibrations.
Read More »M8 Field-Attachable Connectors feature solder contacts.
Including full plastic contact body design, 768 M8 connectors feature cross wire section of 0.34 mmÃ-² (AWG 22), and are available with 3 and 4 gold-plated contacts. They are fully mating-compatible with other M8 connectors, including cordsets and front- and rear-mounted panel receptacles. When properly mated, mated pair is IP67-rated, protecting connection from ingress of liquids and debris....
Read More »Plastic Push-Pull Connectors accommodate 3.5-5 mm dia cables.
Suitable for applications in medical electronics and commercial instrumentation especially where panel-space is tight, Series 430 sub-miniature cable connectors are shielded and environmentally protected for use in harsh environments. Contacts are gold-plated and range from 3-8 per connector. Internal metal sleeve provides 360Ã-º EMI shielding, while panel receptacles are offered with either...
Read More »M12 Connectors are offered with integrated EMI shielding.
Industrial network and sensor connectors of Series 713, 715 and 825 are available with iris spring shielding technology, which protects equipment from EMI (electromagnetic interference) while facilitating and accelerating connection of cable shield to connector housing. This enables industrial applications with networking requirements to be assured that their connectors have EMI protection.
Read More »M12 Field Attachable Connector is made of stainless steel.
Rated to IP67, stainless steel version of 713 series is suited for use in harsh environment applications, food processing equipment, and any application requiring industry standard connection. All metal components are machined from stainless steel, and outer surfaces are smooth to facilitate cleaning. Available with 4 or 5 contacts, connectors accept cable with 6-8 mm OD. Screw termination is...
Read More »Torque Wrench ensures M12 connectors are properly mated.
Ensuring correct torque value of 0.6 Nm, Torque Wrench aids in connecting standard M12 field-attachable cable connectors with hex-shaped locking nuts. It also allows connectors to be unmated as it locks when motion is reversed. Featuring comfortable grip and replaceable jaws, wrench helps guarantee IP67-rated connection.
Read More »M8 Cable Connectors speed assembly time.
Featuring only 2 loose components in each package, 768 series is designed to minimize time required for assembly. Solution is made possible by automated assembly process, during which backnut, grommet, and collet are assembled to connector body. This design affects all unshielded M8 cable connectors with solder and screw type terminations. Connectors remain sealed to IP67 when mated, and each...
Read More »Protective Caps keep snap-in connectors sealed to IP67.
Designed for 620 Series snap-in connector system, Protective Caps are available for male and female cable connectors and panel-mount sockets. Caps for cable connectors include 125 mm strap, which can be used to secure cap, while caps for sockets include 70 mm strap, which can be mounted to panel. Using O-ring to provide IP67 seal, connectors with caps are suited for hand held devices and medical...
Read More »DIN Connector meets industrial application requirements.
Inter-mateable with Binder 425 and 723 series, 423 series suits demanding applications requiring small, circular DIN connector. It features M16 threaded coupling system designed in accordance with IEC 130-9 and is sealed to IP67. Shielding rings facilitate termination and internal strain relief can grip cable diameters from 4-8 mm. Industrial connector supports 2-24 contacts and is available in...
Read More »Binder Increases US Production by 38% to Support North American OEMs
Camarillo, CA – September 4, 2020 – binder USA, LP, has increased U.S. production and inventory to support customers and offset supply chain disruptions during the COVID-19 pandemic. The company is now building 38% more of its most popular OEM products in its Camarillo, California, facility. Inventory on hand has also increased by 10%. The changes allow binder to maintain two to four-week...
Read More »Binder at Electronica 2016
binder presented its products using an extraordinary new trade fair booth at this year’s electronica, which took place in Munich from November 8 to 11. Sales Manager Werner Fröhlich gets right to the heart of it: ‘Open, high-quality, communicative – that was our aim.’ As a specialist and market leader in the area of circular connectors, the Neckarsulm-based family company has had a...
Read More »Binder Tradition, Future, Progress
CAMARILLO, CA Ã- September 7, 2016 Ã- Franz Binder GmbH Co. Elektrische Bauelemente KG is a market leader in the area of circular connectors for industrial applications. As an ownerÃ-operated family enterprise, we place values such as reliability, trust and honesty at the center of our corporate philosophy. Since its founding by Franz Binder in a small wooden hut in 1960, the...
Read More »Binder-USA and Northwire Form a Strategic Partnership
Camarillo, CA Ã-– BinderÃ-USA, a global supplier of highÃ- quality circular connectors and cordsets for over 50 years, has formed a strategic partnership with Northwire, Inc., which produces custom wire and cable interconnect solutions. The strategic partnership between BinderÃ-USA and Northwire, Inc. will enhance the potential for both companies to better service their key...
Read More »Binder-USA and Minnesota Wire Announce Partnership
Camarillo, CA - Binder-USA, a global supplier of high-quality circular connectors and cordsets for over 50 years, has now partnered with Minnesota Wire, which produces custom wire and cable interconnect solutions. The new partnership between Binder-USA and Minnesota Wire will enhance the potential for both companies to better service their key markets with customized interconnect solutions....
Read More »Binder-USA and OCP Group Inc. Announce a Strategic Partnership
Camarillo, CA - Binder-USA is pleased to announce the formation of a strategic partnership with OCP Group Inc., OCP Group specializes in designing and manufacturing custom cable assemblies and wire harnesses for automation, instrumentation, medical, and transportation industries. The new alliance between Binder-USA and OCP Group will enhance the potential for both companies to better service...
Read More »Screw Clamp Power Connectors accept large wires.
Suited for industrial environments, Series 713 M12 Connectors with 4 and 5 pins can be terminated with 16 AWG wires and max cable diameter of 10 mm. Both male and female versions are available in straight form and can conduct currents up to 8 A/contact. Series 820 7/8 in. Connectors with 5 pins can be terminated with 14 AWG wires and max cable diameter of 14 mm. Available in male and female...
Read More »T-Shaped Splitter is designed for DeviceNet applications.
Used with Series 870 7/8 in. connectors in industrial automation environments, T-splitter helps connect several devices for power supply or bus connection. Connectors feature female to male and female connection with option of 4, 5, or 6 gold-plated contacts. Connection is sealed to IP-67 rating when properly mated and is immune to vibrations.
Read More »M8 Field-Attachable Connectors feature solder contacts.
Including full plastic contact body design, 768 M8 connectors feature cross wire section of 0.34 mmÃ-² (AWG 22), and are available with 3 and 4 gold-plated contacts. They are fully mating-compatible with other M8 connectors, including cordsets and front- and rear-mounted panel receptacles. When properly mated, mated pair is IP67-rated, protecting connection from ingress of liquids and debris....
Read More »Plastic Push-Pull Connectors accommodate 3.5-5 mm dia cables.
Suitable for applications in medical electronics and commercial instrumentation especially where panel-space is tight, Series 430 sub-miniature cable connectors are shielded and environmentally protected for use in harsh environments. Contacts are gold-plated and range from 3-8 per connector. Internal metal sleeve provides 360Ã-º EMI shielding, while panel receptacles are offered with either...
Read More »