Macraigor Systems LLC
Brookline, MA 02445
Share:
JTAG Interface Device supports MIPS based processors.
On-Chip Debug Technology (OCDemon) support for MIPS32 24KE RISC core family with DSP lets engineers control and debug their hardware designs and application software without using other system resources. Along with support from several debuggers and full support for Eclipse Ganymede, solution provides GNU toolset with gcc, gas, and gdb. JTAG interface devices are also available for other MIPS...
Read More »
Debug Interfaces support Freescale ColdFire/DSP processors.
While OCDemon usb2Sprite provides USB 2.0 interface to on-chip debugging features of ColdFire and DSP 56300 microprocessors offering solution for designing, debugging, and programming embedded hardware and application software. Pre-built GNU tools and sample configurations contain source, gdbinit, and make files, allowing developers to build, download, and debug via gdb. Flash Programmer provides...
Read More »
Software provides boundary-scan debug/programming tool.
Allowing circuit designers to facilitate early test development, J-SCAN v2.1 communicates to target with USB 2.0 and USB 1.1-compatible interface that runs in high-speed for full-speed modes. It has full support for SPI flash programming, supporting systems using FPGAs and other embedded devices. With J-SCAN, designers can observe behavior of pins under BGA device in real-time on PC, as well as...
Read More »
USB 2.0 JTAG Interface Devices offer embedded debug solution.
Identical in functionality, usb2Demon and usb2Sprite are USB 2.0 JTAG debug interface devices available for ARM, Xscale, and PowerPC processors. Both support Windows and Linux hosts and are fully compatible with all Macraigor software tools, including Flash Programmer, J-Scan suite of JTAG hardware debug tools, OCD Commander debugger, and GNU tools suite. Depending on processor, usb2Sprite and...
Read More »
Debug Tools deliver JTAG and Flash programming support.
OCDemon family of debug tools, available for ARM, MIPS, and Freescale PowerPC 64-bit processors, include hardware interface devices and application programs. Hardware debug devices are available with parallel, serial, USB, or Ethernet connectivity to Windows and Linux host machines. Pre-built GNU tools suite also includes sample configurations for standard evaluation boards that contain source,...
Read More »
Software programs IC devices, FPGAs, and CPLDs.
Boundary-scan debugging and programming tool, J-Scan v1.0 enables designers to see what pins under BGA device are doing in real-time on PC or laptop. Designers can manually force pins to any logic state with click of mouse. To program flash memory if CPU is not available, user sets up signals, selects data file, and presses PROGRAM button. Provided USB 2.0 download cable permits programming in...
Read More »USB 2.0 Device is suited for JTAG/BDM debugging.
Based on proprietary on-chip debug (OCD) technology, usb2Demon is designed for JTAG (IEEE Standard 1149.1) or background debug mode (BDM). It operates as converter of OCD commands, and target port may be JTAG, E-JTAG, OnCE, COP, BDM or any other supported connection. API is fully compatible with microprocessor architectures and software debuggers, including GNU tools suite (GCC, GAS, and GDB)....
Read More »
Debugging Tool supports multiple CPUs on single scan chain.
Built on OCDemon On-Chip Debug Technology, mpDemon includes APIs and standard GNU Debugger remote protocol allowing instant plug-and-play. Unit includes 10BaseT Ethernet, parallel, and serial interfaces to host system. Embedded 32-bit microprocessor allows mpDemon to operate at high speeds, downloading binary files to target. With interchangeable personality modules, users can migrate from one...
Read More »
USB Device enables portable JTAG and BDM debugging.
Compatible with software debuggers and microprocessor architectures, usbSprite provides applications programming interface for target on-chip debug (OCD) operations. It measures 1.3 in.Ã-² and connects to host system via USB mini-b connector. Based on proprietary OCD technology, product operates as converter of JTAG or BDM commands. Dedicated JTAG controller enables binary files to be...
Read More »
USB Device provides JTAG/BDM debugging.
Based on on-chip debug technology, usbDemon operates as a converter of JTAG commands. Windows host PC communicates with unit via USB protocol using proper OCD signals required by target. Host port may be JTAG, E-JTAG, OnCE, COP, BDM, or any of several other types of connections. Applications programming interface is fully compatible with software debuggers, including GNU tools suite.
Read More »JTAG Interface Device supports MIPS based processors.
On-Chip Debug Technology (OCDemon) support for MIPS32 24KE RISC core family with DSP lets engineers control and debug their hardware designs and application software without using other system resources. Along with support from several debuggers and full support for Eclipse Ganymede, solution provides GNU toolset with gcc, gas, and gdb. JTAG interface devices are also available for other MIPS...
Read More »
Debug Interfaces support Freescale ColdFire/DSP processors.
While OCDemon usb2Sprite provides USB 2.0 interface to on-chip debugging features of ColdFire and DSP 56300 microprocessors offering solution for designing, debugging, and programming embedded hardware and application software. Pre-built GNU tools and sample configurations contain source, gdbinit, and make files, allowing developers to build, download, and debug via gdb. Flash Programmer provides...
Read More »
Software provides boundary-scan debug/programming tool.
Allowing circuit designers to facilitate early test development, J-SCAN v2.1 communicates to target with USB 2.0 and USB 1.1-compatible interface that runs in high-speed for full-speed modes. It has full support for SPI flash programming, supporting systems using FPGAs and other embedded devices. With J-SCAN, designers can observe behavior of pins under BGA device in real-time on PC, as well as...
Read More »
USB 2.0 JTAG Interface Devices offer embedded debug solution.
Identical in functionality, usb2Demon and usb2Sprite are USB 2.0 JTAG debug interface devices available for ARM, Xscale, and PowerPC processors. Both support Windows and Linux hosts and are fully compatible with all Macraigor software tools, including Flash Programmer, J-Scan suite of JTAG hardware debug tools, OCD Commander debugger, and GNU tools suite. Depending on processor, usb2Sprite and...
Read More »Macraigor Systems Provides On-Chip Debug Solutions Using USB 2.0 From Linux Workstations to a Multitude of Targets
Engineers building applications for various targets from a Linux platform can quickly and efficiently debug their hardware and software designs using USB 2.0 SAN JOSE, CA-April 3, 2006-Macraigor Systems has ported its proprietary On-Chip Debug Technology (OCDemon) to the Linux platform using the newly introduced usb2Demon and debug interface. This new port gives engineers who prefer developing on...
Read More »
Debug Tools deliver JTAG and Flash programming support.
OCDemon family of debug tools, available for ARM, MIPS, and Freescale PowerPC 64-bit processors, include hardware interface devices and application programs. Hardware debug devices are available with parallel, serial, USB, or Ethernet connectivity to Windows and Linux host machines. Pre-built GNU tools suite also includes sample configurations for standard evaluation boards that contain source,...
Read More »Macraigor Systems Provides On-Chip Debug Solutions With Full GNU Toolset Support for ARM 1136, iMX31 and Intel 81342 Dual Core XScale Processors
o Engineers building applications for new ARM11 technology-based processors will be able to quickly and efficiently debug their hardware and software designs SANTA CLARA, CA-October 4, 2005-Macraigor Systems has ported its proprietary On-Chip Debug Technology, OCDemon, to the ARM 1136, iMX31 and Intel Dual XScale 81342 processors and is now offering full GNU toolsets to be used with these...
Read More »
Software programs IC devices, FPGAs, and CPLDs.
Boundary-scan debugging and programming tool, J-Scan v1.0 enables designers to see what pins under BGA device are doing in real-time on PC or laptop. Designers can manually force pins to any logic state with click of mouse. To program flash memory if CPU is not available, user sets up signals, selects data file, and presses PROGRAM button. Provided USB 2.0 download cable permits programming in...
Read More »USB 2.0 Device is suited for JTAG/BDM debugging.
Based on proprietary on-chip debug (OCD) technology, usb2Demon is designed for JTAG (IEEE Standard 1149.1) or background debug mode (BDM). It operates as converter of OCD commands, and target port may be JTAG, E-JTAG, OnCE, COP, BDM or any other supported connection. API is fully compatible with microprocessor architectures and software debuggers, including GNU tools suite (GCC, GAS, and GDB)....
Read More »
Debugging Tool supports multiple CPUs on single scan chain.
Built on OCDemon On-Chip Debug Technology, mpDemon includes APIs and standard GNU Debugger remote protocol allowing instant plug-and-play. Unit includes 10BaseT Ethernet, parallel, and serial interfaces to host system. Embedded 32-bit microprocessor allows mpDemon to operate at high speeds, downloading binary files to target. With interchangeable personality modules, users can migrate from one...
Read More »